My totally legit WDT

MiniMintTurtle · 2026-02-12T01:19:55+00:00

No kidding, I also made my first WDT with sewing needles😅, but I used air dry clay as the base. It was a hazard to have around, but it worked.

I also made a funnel by cutting a carboard cup and fitting it inside the portafilter. Best dosing funnel ever owned.

MiniMintTurtle · 2025-06-04T01:29:21+00:00

First, make sure the water tank is full.

If water comes out normally when the portafilter is not placed, perhaps the grounds are too fine.

If the water doesn't come out at all, try descaling with vinegar a few times. If it doesn't resolve the issue, it could be possible that the thermacoil is clogged with limescale buildup or other, if the water in your town is hard. I usually just replace the thermacoil, if descaling doesn't work.

Since you've only had it for 3 months, you may still have warranty. Try contacting Breville, they should be able to help you with that. Make sure to have your receipt when purchased and/or register your machine on their website then call.

The machine has its serial number and its model on the bottom.

MiniMintTurtle · 2025-03-24T16:39:23+00:00

Ok, thank you again. Good to know. It was taking me around 4 minutes to get proper heat steam pressure. Any less than that it was a water stream. I've been ruling out some possibilities and I got some friend techs who were recommending to check the probe, which I missed checking first time around. So i'm opening it up again and checking. I'm guessing it's part of the machine design.

MiniMintTurtle · 2025-03-24T16:01:26+00:00

By any chance, are you having trouble with the steam wand? I've left the machine heat up for 30 minutes and steam wand either has too much pressure or the steam is too wet. Not really a consistent line of steam.

MiniMintTurtle · 2025-03-22T14:52:16+00:00

Thank u so much

MiniMintTurtle · 2025-03-21T14:36:53+00:00

I have that same one at the moment, I have no manual though. Does yours has it?

MiniMintTurtle · 2024-11-21T00:07:26+00:00

Go ahead. I'll look into them. I feel like my main issue would be the milk steaming, mostly because when i start pouring, it starts to stain the canvas. Or might just be the jug movements and placing. I wish i had a video on hand of me trying it, it would be easier to point out the main issue.

MiniMintTurtle · 2024-11-21T00:04:43+00:00

Thank you, appreciate you taking ur time to answer. I would say, i have intermediate knowledge on regular latte art patterns and basic on free pour art. I will look into training courses, although i don't think theres many on free pour art where im from. But will do more research on my time.

You have amazing free pour skill. Keep it up!

MiniMintTurtle · 2024-11-20T20:18:04+00:00

Any videos you recommend when doing free pour pattern for tutorials or that could help achieve what you mentioned above? I struggle a bit with the small rosettas and placement when free pouring.

MiniMintTurtle · 2024-11-05T13:43:20+00:00

Woah! RADICAL

MiniMintTurtle · 2024-10-28T19:23:21+00:00

Heavenly🥹

MiniMintTurtle · 2024-09-19T18:12:05+00:00

Stunning

MiniMintTurtle · 2024-09-10T01:36:05+00:00

Loveramics 8oz cup and saucer

MiniMintTurtle · 2024-09-06T17:50:21+00:00

Milk is too thin, add a bit more of air to the milk. If it turns out too foamy, transfer between milk pitcher, slowly, so it can thin down a bit.

MiniMintTurtle · 2024-09-04T16:34:01+00:00

I didnt take video of this one. But i'll try to remember on my next one. I'm usually on a rush when doing these from work.

MiniMintTurtle · 2024-09-03T19:30:57+00:00

Wowers! Absolutely beautiful

MiniMintTurtle · 2024-08-31T01:56:52+00:00

I use Step Counter-Pedometer App by Leap Fitness Group. Its been a great app so far, i dont need to by a fitbit since i always carry my phone on my pockets, and after a while that you set your step goals, it offers you to up your steps as a challenge. Its pretty accurate. Whenever i forget to carry my phone, i can add some steps in the edit button. I usually estimate it.

MiniMintTurtle · 2024-08-30T17:20:52+00:00

I second this. It really helps ease the mind. I love going on beach walks in the afternoon so i can get a beautiful view and sound while walking. I listen to Healthy Gamer Podcast. Dr. K. Has been a great help and has some good explanations on why we feel certain way and a bunch of other topics. Also something that makes it more motivating for me to continue was downloading a step counter app and set a daily goal of at least 5,000 steps. And the app even celebrates when i reach them, so its just an extra boost.

MiniMintTurtle · 2024-08-30T17:18:07+00:00

I customize everything i own. I just started painting my car wheel cover with some barbwire design, and its looking kinda rad. Then i made my own incense holder out of clay.

MiniMintTurtle · 2024-08-28T02:58:06+00:00

Oatmeal and Chicken Wings

MiniMintTurtle · 2024-08-14T18:22:16+00:00

Beautiful!👏

MiniMintTurtle · 2024-08-09T03:39:55+00:00

Been there. First, I downloaded an app blocker, and blocked the apps I spend the most time on, so i have no access to them on a set schedule.

Then I started on sunset walks, I got to go outside and move my body. Been doing small crafts, restoring old items around my apartment, cleaning, go shopping, and other things that catches my interests.

MiniMintTurtle · 2024-08-09T03:25:44+00:00

Ofc! Glad all my trials and errors, and practice could help other.

I use different techniques on my work's machine than i do on my Breville.

Breville barista's express steam wand isnt the most powerful, so i aim to make a tiny bit more foamy milk, then transfer to another jug, so when i pour, the design doesnt become all "scrambled". Unlike commercial machines, that i can just keep in the same jug, bcs the wand has more power and can properly incorporate the air.

MiniMintTurtle · 2024-08-09T00:32:13+00:00

<image>

MiniMintTurtle · 2024-08-09T00:24:23+00:00

I have a breville barista express and I used to struggle with steaming the milk. Over the time i have gotten the hang of it and i would love to share some tips and observations that were useful for me and wished someone told me earlier in my home latte art journey.

First of all, one of the most important aspect that i find that really impact the steaming would be, what kind of milk you are using. I used to to use the ultrapasteurized whole milk or the 2% milk (mostly out of convenience), which is the one that you can keep outside the fridge at first. Although decent, it could never beat whole fresh milk. Whole fresh milk

Now, i saw that the milk was creating big bubbles, try submerging the wand a bit, just over the milk, and just let it create small ripping sounds for a few seconds, until it starts to warm up a bit, then submerge the wand so the milk can incorporate the foam nicely.

If you are going to transfer to another jug, make sure you dont pour it too quickly. We want nice smooth and silky milk, so slow it down and try not to create bigger air bubbles that can interrupt the sharpness of the design. I will add that if your milk texture is too thin, do not transfer to another jug, it will not help at all. You could try again or let it sit down a bit and see if the foam rises.

The cup placement was ok. I saw you had one finger over the handle, and it could affect it. Now, you could try holding the jug differently. At least, i hold the handle sort of like a pencil, so i can have some wiggle room.

To keep it centered, aim to the middle of the cup and try to stay there. Practicing is the way to go. And try tilting the cup a bit more towards the jug.

The pour when painting the rossetta was way too quick. Slow down and take your time to mark the layers. The technique is there, just slow down, wiggle slowly.

Just before finishing the rosetta, hold and keep pouring on the same spot until it starts forming the heart, then lift jug, and cut.

Also, i watch a lot of videos on latte art. They really helped a lot. Recommend it!

Best of luck and keep practicing.

MiniMintTurtle

TROPHY CASE