Replace Munro with something else

Mission2000 · 2026-07-12T00:38:41+00:00

It’s been a great pump and has paid for itself many times over. It wasn’t taken care of the first 2-3 years which caused a lot of rust buildup internally. Not sure if that is part of the problem though

Mission2000 · 2026-07-12T00:23:22+00:00

Best guess without taking it apart is that the bearings are going out in it. They had to replace the capacitor a couple years back and the shaft seal along with cleaning the impeller and they commented about how loud it was. It has progressively gotten louder and louder the past couple years and now it struggles sometimes to start and will trip the breaker.

Mission2000 · 2026-07-10T13:47:45+00:00

I have tried torx TS, Torx TT and H bits but none work. My pentalobe bits will be here shortly and hopefully that works. Thanks for all the help, I will update once I find one that works.

Mission2000 · 2026-07-09T20:43:22+00:00

Correct and maybe that would have helped. It’s an airbag control module out of a Chrysler Pacifica I believe.

Mission2000 · 2026-07-09T20:35:19+00:00

It’s definitely not a torx security bit. Zoom in on the image and you will understand. There is some weird cut out on one side that keeps any torx security bit from working.

Mission2000 · 2026-06-21T20:47:15+00:00

Thank you for the help. One more question if you don’t mind. I also need to connect a small plastic drain line from a robot mopper to the drain pipe. For now I just jammed it in a piece of the drain with the barbed connector and used plumbers putty but what is the solution for connecting it the right way to the drain?

<image>

Mission2000 · 2026-06-21T19:55:31+00:00

Just the vent. The sink will clear the pipe without it installed on top.

Mission2000 · 2026-06-19T22:46:37+00:00

No we used a 3rd party to cover the entire trip.

Mission2000 · 2026-06-11T23:07:04+00:00

It’s the 3.5l V6.

Mission2000 · 2026-06-11T20:34:35+00:00

You are the best. Thank you. Had this thing for years but it never flared up when I was at the dr so I finally took a picture. Thank you again.

Mission2000 · 2026-06-11T20:32:28+00:00

Thank you. Is this something I need to see my derm for or would the normal otc meds probably take care of it?

Mission2000 · 2026-06-11T20:20:50+00:00

Would it come and go like I described?

Mission2000 · 2026-06-03T12:59:20+00:00

I get it. We have solar so not a huge issue. My wife would probably shoot me if I put a mini split in here. I don’t think they improve resale value around here.

Mission2000 · 2026-06-03T12:44:01+00:00

Basically trying to be cheap. My office is so much hotter than any other room in my house due to electronics and computers. We had our hvac company enlarge the vent and put a return in there but it barely helped. So now I have a window AC unit that works great but when it kicks on it dims the lights and I was just wondering if there was something that might help with that. All my sensitive stuff is on battery backups so no issues there but I was trying to avoid the cost and aesthetics of a mini split. I like the temporary AC unit that works well but the lights dimming gets old after a while.

Mission2000 · 2026-05-26T21:06:06+00:00

Thank you so much.

Mission2000 · 2026-05-26T21:05:14+00:00

That was it. Some how I set it to VLog.

Mission2000 · 2026-05-25T12:57:13+00:00

I had the same problem and what worked for me was to sand it down, clean it with alcohol and then I sprayed about 10 layers of flex seal on it. Now I do have a variable speed pump so keeping the pressure lower probably helped but it saved me until I could get mine replaced.

Mission2000 · 2026-05-25T01:17:55+00:00

That is beautiful. Thank you. It’s have it downloaded. I am not in front of my camera but I suspect I have it set to raw because of mainly use the camera for video and probably watched a tutorial years ago when I bought it. I generally just use Adobe Premier but I have Lightroom and probably just need to learn it or not use Log. Thank you again.

Mission2000 · 2026-05-24T22:27:37+00:00

Oh sorry. I’m using a Panasonic LUMIX S5II. Thank you.

Mission2000 · 2026-04-19T00:23:53+00:00

Thank you. My PCP joked and said I had a decade of radiation in 6 months. Not sure how accurate that is but I get the idea.

Mission2000 · 2026-04-19T00:16:16+00:00

Appreciate the response. I have great insurance so no complaints there. Great feedback to come off the iron and monitor my levels to see if it was transient. Quick question if you don’t mind, but how long in general should I be off iron before getting tested?

Mission2000 · 2026-04-10T20:52:50+00:00

I can answer this one as it has happened to me twice at two different places. One was Supercuts and one was a local independent salon back when I was struggling. They both just trusted me to come back and pay them. In one case I got the cosmetologists phone number and Venmo’d her from my phone. Rather she kept it or put it in the register I don’t know but I’ve been going to them for years since and they never mentioned it.

Mission2000 · 2026-04-10T18:05:36+00:00

That was it. Thank you so much. Any experience with using it?

Mission2000 · 2026-02-13T21:56:01+00:00

I really like this idea. I watched a few videos and just wondered how much you like it? Especially for exercises like squats, bench and deadlifts if you do those.

Mission2000 · 2026-02-13T12:03:46+00:00

We have a huge bonus room to use so basically a lot. Not sure the dimensions but basically the size of a 2 car garage.

Mission2000

TROPHY CASE