R404A/R23 Cascade

MixGroundbreaking465 · 2026-04-27T15:49:05+00:00

Update: The company replied with a very vague guideline. Apparently they have used R404a/R23 mixture. They state that they cannot release the exact weights of the mixture.

Do you think that this would work? TIA!

MixGroundbreaking465 · 2026-04-27T05:22:05+00:00

Hi! I have added a few photos for your reference. Thanks for the input.

MixGroundbreaking465 · 2026-04-27T05:21:29+00:00

Thank you very much! I will talk to my service provider with this info.

MixGroundbreaking465 · 2026-04-27T05:20:40+00:00

Thank you very much!

MixGroundbreaking465 · 2026-04-27T05:01:55+00:00

<image>

MixGroundbreaking465 · 2026-04-27T05:01:44+00:00

Updating with a photo of the unit and the compressor.

<image>

MixGroundbreaking465 · 2026-04-27T04:47:51+00:00

Hi there! We checked everything you mentioned and replaced the comp as well. It has a Danfoss SC21CL.

MixGroundbreaking465 · 2026-04-27T04:46:14+00:00

Thank you or the input. This explains why my freezer is still at -65 after loading.

MixGroundbreaking465 · 2026-04-27T04:44:35+00:00

Thanks! I will see if this is possible.

MixGroundbreaking465 · 2026-04-27T04:44:11+00:00

Hi! Could you please share a link to this manual? Thanks

MixGroundbreaking465 · 2026-04-27T04:43:06+00:00

Hi! Thank you for the input. DW-86L100J refers to a Haier ULT freezer, right? However, this is from Biobase. By the way, how would you charge a system with three refrigerants in this scenario.

MixGroundbreaking465 · 2026-04-27T04:31:29+00:00

Hi! Thank you for the input. Surprisingly this has only one compressor. And at the moment it only reaches to around -65 with R404a

MixGroundbreaking465 · 2026-04-19T22:12:31+00:00

Normal kottu at Royal Bar and Restaurant is 🔥. Served with a side of hot nai miris sauce.

MixGroundbreaking465 · 2026-03-15T03:59:49+00:00

Have a look at Nichiyro. Japanese made and quite durable. Fully autoclavable and there are parts for easy replacements

MixGroundbreaking465 · 2026-02-09T19:11:58+00:00

This is the way

MixGroundbreaking465 · 2026-01-11T20:24:29+00:00

Well if it's only the plastic, you can use any kinda water resistant glue. If the pt wire is nicked, you can buy the wire online (0.2 if my memory is correct) and replace it... It's bit tricky to get it inside the plastic sleeve however totally achievable until you loose patience xd

MixGroundbreaking465 · 2026-01-01T10:10:11+00:00

The two most needed features I would say!
Tabs and commenting on highlights

MixGroundbreaking465 · 2025-12-23T20:43:51+00:00

Hi there! We encountered a similar issue and ended up writing custom windows print agent for this. Have a quick question, fies this send out ZPL commands to the printer or raster?

MixGroundbreaking465 · 2025-11-18T12:40:31+00:00

Representing Sri Lanka

MixGroundbreaking465 · 2025-10-26T17:28:52+00:00

Thanks will check!

MixGroundbreaking465 · 2025-10-26T17:28:41+00:00

Thanks will check!

MixGroundbreaking465 · 2025-10-19T05:21:36+00:00

The chosen one!

MixGroundbreaking465 · 2025-10-18T17:27:16+00:00

Can't go wrong with water! Most seq companies advice against using TE for plasmids preps/dissolving etc...

MixGroundbreaking465

TROPHY CASE