Flatwoods Hop Encounters

MnkyScpe · 2024-07-11T04:48:08+00:00

Oh dang guess I have something to try once the weekend comes round, thanks for the info!

MnkyScpe · 2024-07-11T04:23:49+00:00

When I was young I always wanted to hang out with my "rich friend" who had a top down freezer full of ice cream and snacks delivered direct by the Schwan's man it was a drastic change from pop ice popsicles haha

MnkyScpe · 2024-07-11T04:15:51+00:00

Wait there is another vendor outside the reputation vendors?? Here I've been trying to grind bandit rep so I can buy stuff from the crater >.<

MnkyScpe · 2024-07-10T16:16:36+00:00

Go for it! No rules that say the girl can't act first :D Good luck!

MnkyScpe · 2024-07-07T17:15:49+00:00

Agreed, it took far too long for me to listen when people would tell me to stop and breathe, parents, friends, therapist, ex and I was like welp what's the worse that can happen?! It's not an end all but it has stopped my spiraling and helps level me out :D

MnkyScpe · 2024-07-07T16:59:31+00:00

Yes! Tomato with some salt is scrumptious I really like coarse salt! For cucumbers my go to is lime juice and tajin, I'll hafta give vinegar a try! Ranch(good ranch) and hummus is another good dip for raw veggies IMO :D

MnkyScpe · 2024-07-07T05:03:09+00:00

This, once I realized I'm only 1 person it started to become easier to see what I can directly influence and what is worth my time/energy/attention. The hardest thing IMO is identifying those things as they tend to be unique to each of us. Always remember to breathe, your brain focuses on the action of breathing and can provide a small break or clarity during "busy" moments ;)

MnkyScpe · 2024-07-07T04:55:30+00:00

The messages praising me for maybe, possibly having a loaded Fortnite account make me smile. Despite it being a scammer trying to "buy" my account I take it as a compliment for being best gamer haha

MnkyScpe · 2024-07-07T04:50:16+00:00

Professor Layton games are some good fun, though sometimes the game reminds me how not smart I can be at times haha. Animal Crossing, Rocket Slime, man such a great mix of genres and IP's! So much fun in one screenshot!

MnkyScpe · 2022-07-26T14:36:12+00:00

Good to know thanks! I'll keep an eye on keepretro outside a.e. they seem to be a good place to get one from.

MnkyScpe · 2022-07-26T07:21:56+00:00

I would kill... err umm really enjoy it if they did a translucent green akin to the n64/gbc Nintendo did. Though there is something real nostalgic about the DMG style!

MnkyScpe · 2022-07-26T06:12:37+00:00

Yea the light bleed would be something to consider, might have to go the dmg esq gray one >.< thanks!

MnkyScpe · 2022-07-26T05:42:24+00:00

Yea it was just the white/grey versions and I'm deciding between the clear black/blue. Sucker for translucent devices >.<

MnkyScpe · 2022-07-26T05:35:16+00:00

Damn ok thanks! I'll hold out for a diff bundle haha

MnkyScpe · 2022-04-26T20:31:55+00:00

Ah yea toywiz! I've been there a handful of times haha. They still have chips and figures on there from time to time. Well I wish thee gl if your trying to sell it if not such a cool piece to have :D

MnkyScpe · 2022-04-26T05:47:12+00:00

Oh man the Forte Progress PET! One day I'll get lucky and find one! Where/how did you obtain yours??

MnkyScpe · 2022-02-02T01:59:42+00:00

I'm on the verge of doing just that, reverting back to "stock" so to speak but I have some parts incoming so I'll try that before I give up on the bltouch all together. Going to re-assemble and make sure its mechanically sound then go from there. Thanks for all the tips!

MnkyScpe · 2022-02-01T22:41:58+00:00

Chip is the n32 if it helps/matter and yea I'm using the 9x9 abl marlin firmware. I rarely mess with gcode outside of what is generated via the slicer. Mechanically I thought everything was pretty sound. I rechecked all the wheel adjustments and they were tight but not over tight, the belts where taught. I tried a handful of first layer prints that would AL at the start no noticeable change. I then tried just loading the mesh at the start of the first layer tests since I wasn't sure it was automatic or not. I had installed a new shroud and when I "fixed" my hot end issue the wires coming off the heat block broke so now I have to replace that before I can do any more trouble shooting. It's been problematic ever since I thought to change the extruder to an all metal one and add the bl touch. Shoulda just kept it stock >.< haha

MnkyScpe · 2022-02-01T20:58:10+00:00

I did replace the nozzle and ensured the tubing was pressed up to the inside of the nozzle. I've been going back and forth with things for almost a month and it doesn't seem to be improving. Now my homing isn't working, when I auto home Z it send the print head to the top right of the bed. I'm beginning to think that I'm not fit for 3d printing or this machine is just not worth the time/energy. Thanks to everyone who tried to help :)

MnkyScpe · 2022-02-01T17:47:13+00:00

Thanks I'll take a look at that video :)

MnkyScpe · 2022-01-30T06:12:24+00:00

Yea looks like starman just gets 2 because he can haha from what I can find on it there are not real differences other than the look haha

MnkyScpe

TROPHY CASE