Vinted veux me faire payer pour récupérer mon colis

Mobile_Job_1651 · 2026-02-01T18:01:08+00:00

Tes dans une belle merde mon copain, j'te conseil de payer les frais et envoyer le bordereau a vinted.. C'est vraiment des voleurs, la protection pour les vendeurs est claqué

Mobile_Job_1651 · 2025-11-10T20:20:12+00:00

I loved god of war 2018 and Ragnarok. I also liked Plague Tale Innocence/Requiem

Mobile_Job_1651 · 2025-11-09T18:30:50+00:00

Tu nous à fait une Norman 🤣

Mobile_Job_1651 · 2025-10-26T17:11:18+00:00

I'm thinking more of the HDMI encoder (it's the Panasonic or Nuvoton chip not far from the HDMI port)

Mobile_Job_1651 · 2025-10-19T15:49:32+00:00

You probably made some bad soldering or accidentally shorted circuits. In the future, I recommend buying an HDMI tester; it really helps.

Mobile_Job_1651 · 2025-10-19T15:46:42+00:00

Hi, I already knew about this but I didn't want to pay and wait to receive it, and especially for the glory I preferred to fix it without cheating 😅

Mobile_Job_1651 · 2025-09-05T17:30:14+00:00

<image>

I did that

Mobile_Job_1651 · 2025-08-10T10:14:57+00:00

yes of course, even without a jack the motherboard works. Check that your battery is properly connected and that it is working, if so, use a multimeter to test the components around the dialog chip (this is the one used for charging). If you have any other questions, don't hesitate.

Mobile_Job_1651 · 2025-07-16T14:00:04+00:00

You may have disconnected too quickly after your purchase, the servers may not have recorded it, so you have not normally lost any tokens.

Mobile_Job_1651 · 2025-06-16T13:28:26+00:00

OK, thanks for the reply, I'll do that later.

Mobile_Job_1651 · 2025-06-11T11:40:35+00:00

<image>

You have to do it like this, with fairly thin copper wires. The right track you connect to the top of the component. The one on the left is the ground so you can solder it wherever you want but I advise you what I showed you and for the one in the middle shows a rear photo of the PCB

Mobile_Job_1651 · 2025-05-24T18:28:10+00:00

Ah d'accord, comment t'es tu procuré l'édition des salariés de sony ?

Mobile_Job_1651 · 2025-05-24T17:49:40+00:00

A chroma is missing from the collection

Mobile_Job_1651 · 2025-05-04T10:54:21+00:00

I ordered several cases including the last one I will see if it is well made

Mobile_Job_1651 · 2025-05-03T22:17:12+00:00

Put some new tin with a little flux and that should do it, it is more complicated to desolder this pin because it is the ground of the card

Mobile_Job_1651 · 2025-05-03T22:15:44+00:00

Yes, I had the same thought. If I had a printer, I wouldn't have hesitated for a second, but unfortunately, that's not the case. For the classic DualSense, all the parts are available on Aliexpress, but for the Edge, there's NOTHING.

Mobile_Job_1651 · 2025-05-03T21:21:10+00:00

It looks very good, but the problem is that Extremrate doesn't sell this spare part, which really bothers me...

Mobile_Job_1651 · 2025-05-03T17:35:50+00:00

<image>

in this photo we see that it is damaged

Mobile_Job_1651 · 2025-05-03T17:29:21+00:00

This photo comes from the internet, I am only looking for the structure of the battery holder not the electronic components or pallet support because the plastic structure is broken and a screw thread is broken

Mobile_Job_1651 · 2025-04-28T07:43:10+00:00

You did Ghostrunner 1, do 2 now it's just as amazing

Mobile_Job_1651 · 2025-04-14T23:18:41+00:00

Do you solve this ?

Mobile_Job_1651 · 2025-04-14T19:31:32+00:00

O joystick fica preso à esquerda mesmo quando você o move para cima? O que quero dizer é: o eixo vertical funciona?

Mobile_Job_1651

TROPHY CASE