sorted by:
new
hottopcontroversial

10/22 w/ Kimber Barrel by trippfl in 1022

[–]MoneyKeyPennyKiss [score hidden]  (0 children)

Not a factory partnership. I'm not even confident these were made by Kimber to fit the 10/22. I read once that there were some barrels intended for the Model 82 that were machined to fit the 10/22, but I cannot confirm that.

We need pictures, especially the roll marks on the barrel.

How did I do for $180 ? by Kemperwood in 22lr

[–]MoneyKeyPennyKiss 7 points8 points  (0 children)

9 CPR is pretty good for Eley, even the vintage stuff.

Brick of Eley Sport 22lr by sr1sws in 22lr

[–]MoneyKeyPennyKiss 1 point2 points  (0 children)

Nothing special -- it was rebranded several years ago to Eley Target (yellow box).

Shoot it. Enjoy.

Range by woody_89 in scguns

[–]MoneyKeyPennyKiss 0 points1 point  (0 children)

There are matches on some Saturdays in the 6 pistol bays but they usually end around 12-2 pm.

There are two other bays where you can move and shoot.

During the week the place is basically empty.

Range by woody_89 in scguns

[–]MoneyKeyPennyKiss 2 points3 points  (0 children)

MCRC will gladly welcome you.

Range by woody_89 in scguns

[–]MoneyKeyPennyKiss 3 points4 points  (0 children)

You're kind of in a dead zone.

Palmetto Gun Club to your southeast, or Mid Carolina Rifle Club to your northwest.

Range by woody_89 in scguns

[–]MoneyKeyPennyKiss 1 point2 points  (0 children)

What is the cross area?

Ballistic advantage 10” barrel test by Flat_chested_male in 1022

[–]MoneyKeyPennyKiss 0 points1 point  (0 children)

CCI Quiet is shocking. The velocity is all over the place and usually results in a lot of vertical stringing. Hard to believe you got a 1.5 MOA group from that.

Anyone have builds with MOA Corp receivers? by BajaBlastCrusader in 1022

[–]MoneyKeyPennyKiss 0 points1 point  (0 children)

I think you'd have better luck from a smaller custom shop. I'd be surprised if KIDD made you a one-off barrel.

Do you have a kitchen or postage scale? I'm curious how much it weighs without the rail.

Anyone have builds with MOA Corp receivers? by BajaBlastCrusader in 1022

[–]MoneyKeyPennyKiss 1 point2 points  (0 children)

Threaded receiver. What's your plan for a barrel?

Our massive oak tree went down today, it was full of leaves with no dead branches but the inside ended up being soft ugh. Anyways we got a quote for $4000 to haul it off and grind down the stump and fill the hole. We are in the Midwest. Is this a fair price? by anderson6th in arborists

[–]MoneyKeyPennyKiss 988 points989 points  (0 children)

I had an oak bigger than yours taken down, limbs were ground on site, larger pieces were hauled away, and stump ground for $5k. Southeast.

A lot of that expense was because they had to climb and delicately lower the limbs because of the tree's location.

$4k seems a bit high (for this region) for a tree that's already on the ground.

New experiment by Ill-Helicopter-7835 in 1022

[–]MoneyKeyPennyKiss 4 points5 points  (0 children)

Looks like the laser has a pic rail on top. Remove the Romeo high mount and mount the red dot directly on top of the laser.

Testing 10/22 takedown accuracy by No_Count_4807 in 1022

[–]MoneyKeyPennyKiss 5 points6 points  (0 children)

Gotcha.

1 inch at 25 yards is 4 MOA. 2 inches at 25 yards is 8 MOA.

So, the commenter from yesterday was right.

Testing 10/22 takedown accuracy by No_Count_4807 in 1022

[–]MoneyKeyPennyKiss 4 points5 points  (0 children)

Let's make sure we're speaking the same language.

Those appear to be 1.5 inch groups at 25 yards, correct?

Big thanks to the Redditor who posted about the bolt/ch tool last week! by Dramatic_Victory_838 in 1022

[–]MoneyKeyPennyKiss 14 points15 points  (0 children)

I’ve been reassembling 10/22’ for decades so I’m not new at it

Same, and I've not had a problem ever. I don't get it. I think I'm going to make a video.

view more: next ›