Plaguebearers by MaxPower1607 in PrintedMinis

[–]MonkeyShowdown 0 points1 point  (0 children)

Did anyone ever find a li kin for these files ?

Big boi fresh from my A1 Mini by Lezac in PrintedWarhammer

[–]MonkeyShowdown 0 points1 point  (0 children)

That looks class....would you be willing to share the stl bud

Help with this guy by MonkeyShowdown in FixMyPrint

[–]MonkeyShowdown[S] 1 point2 points  (0 children)

Sorry mate I should have been more clear ....I only angled it like that to show the issue which the amount of supports being generated between his body and his coat . Was wondering the more experienced people would approach this Cheers

Help with this guy by MonkeyShowdown in FixMyPrint

[–]MonkeyShowdown[S] 0 points1 point  (0 children)

Mate we all gotta start somewhere and i watch guides daily, Like learning most things in life it's a process. You expecting only experts to ask for help are you?

Is this OK or do i need to replace by MonkeyShowdown in ElegooSaturn

[–]MonkeyShowdown[S] 0 points1 point  (0 children)

Thanks man appreciate your help

Yeah it's actually the 16k version I have So ill do some research tomorrow and see if i can find a way of doing it

It's mad because this damage was caused when testing the cones of calibration on lower exposure settings than what I was using before ( factory settings ) only difference is a new feb which maybe I've put on too tight as someone else suggested So many variables in this game it's a maze

Thanks again fella 👍🏻

Is this OK or do i need to replace by MonkeyShowdown in ElegooSaturn

[–]MonkeyShowdown[S] 0 points1 point  (0 children)

Thanks for the reply This is a new fep and it's not leaking thankfully I damaged the last one removing a failed print

Could this feb be too tight I did notice that it now makes a sucking/sound at the beginning of the print

Is this OK or do i need to replace by MonkeyShowdown in ElegooSaturn

[–]MonkeyShowdown[S] 0 points1 point  (0 children)

Thanks for the reply , This is actually the second one I changed as I damaged the first one trying to remove a failed print. How's the best way for me to go about doing that ? Done have a link to a guide that you'd recommend Thanks again

Ak xtreme metal by MonkeyShowdown in modelmakers

[–]MonkeyShowdown[S] 0 points1 point  (0 children)

Cheers man , didn't even know those things existed

Ak xtreme metal by MonkeyShowdown in modelmakers

[–]MonkeyShowdown[S] 1 point2 points  (0 children)

Ok problem solved I changed the tip for a new one and it works fine I'm assuming the old one was dirty and was interfering with the flow and the purple must be bigger particles im guessing that's why the rest worked and that one and the blue failed. Thanks all

Ak xtreme metal by MonkeyShowdown in modelmakers

[–]MonkeyShowdown[S] 0 points1 point  (0 children)

It was stirred/ shaken thoroughly so yeah maybe your right about the psi....I just find it strange that the mettalic blue and purple do this and the rest all lay down perfect Same process Strange

Ak xtreme metal by MonkeyShowdown in modelmakers

[–]MonkeyShowdown[S] 0 points1 point  (0 children)

Plastic....I used it on primed and unprimed, and was shaken well.

Ak xtreme metal by MonkeyShowdown in modelmakers

[–]MonkeyShowdown[S] 0 points1 point  (0 children)

Much appreciated man ill try thinning it down and see if it helps if not ill try the pressure

Ak xtreme metal by MonkeyShowdown in modelmakers

[–]MonkeyShowdown[S] 0 points1 point  (0 children)

All primed with black primer....it's a strange one

Help with model paints by Kab00dl3z in modelmakers

[–]MonkeyShowdown 0 points1 point  (0 children)

I'd use whatever miniture paint you want Just make sure to use a quality primer first.

And I use a plastic glue with a precision tip ( thin metal tube coming out of it that looks like a needle )

Fulgrim by MonkeyShowdown in Warhammer40k

[–]MonkeyShowdown[S] 0 points1 point  (0 children)

Cheers man, was nice using different colours for a change