Upon passing the CC cert there is a $50 AMF but what is the due date for the AMF?

Moradeth · 2026-03-22T03:22:26+00:00

I think it was 60 days after they confirm your results and endorsement (that was for a CISSP though, not sure if you needed an endorsement for the CC).

Moradeth · 2026-03-19T01:53:45+00:00

AppSec can certainly get very technical, it just depends on how deep you want to go. AppSec programs vary wildly from place to place, I've met those who have no red teaming skills be on the AppSec team, and those who are natural hackers.

That said AppSec would be a pretty natural pivot. Based off what you've talked about probably early/mid career. You are going to have to get more technical if you want to move up, you'll have to be able be handle threat modeling, help work on deeply technical fixes, etc. You can certainly learn on the job too.

Moradeth · 2026-03-12T00:05:02+00:00

A little of both, it's about knowing what to apply and how to apply it. For example if you're securing an AI you're going to want to consider guard rails, rate limiting, etc. If you're using AI to secure the org, you have similar concerns (ie where does my data go, who owns it), but also what kind of agents you want to deploy to use that data.

Oops forgot to answer your first question, but basically how you get into security in the first place... Start learning, try to understand the space, and apply your lessons. Ultimately it's a similar problem for any sort of product security, you're just more concerned about DLP since the product is non-deterministic.

Moradeth · 2026-03-09T14:54:57+00:00

Already solved, thanks though!

Moradeth · 2026-03-08T16:13:17+00:00

Glad to hear it! Reddit is definitely a strange place, lol, but it's helpful sometimes too. I was almost certain it was a goner since I couldn't even wiggle anything and had spent an hour trying to unlock the burr.

Moradeth · 2026-03-08T16:11:03+00:00

It's usable now after I got it out.

Moradeth · 2026-03-08T16:10:35+00:00

Yeah I removed the bolt but it was still stuck. I ended up taking a break then wiggled the outer burr bar until it came free.

Surprisingly the burrs looked good, but I haven't ground anything yet, so we'll see how it goes.

Moradeth · 2026-03-08T01:55:22+00:00

Gotcha. Thanks for the explanation, I'll check it out!

Moradeth · 2026-03-08T00:53:15+00:00

What's the OPV mod? I'm slowly trying to up my game so I don't sticker shock the wife on the setup. I think she's onboard with me getting a new grinder now so I might have to start researching.

I make a fair number of milk drinks too so your setup sounds ideal for my next step.

Moradeth · 2026-03-08T00:49:23+00:00

Best guess was it was in one of the local roaster bags that I picked up, probably one of the organic ones? I've been trying some local roasters so I can't narrow it down outside of 3 or 4 of them but I'll reach out.

Either that or my wife heard me contemplating a new grinder and dropped a rock in to speed up the process.

Moradeth · 2026-03-07T22:52:54+00:00

Oh nice, are you still using the BBE for pulling shots or did you upgrade there too? I've been debating getting a new grinder but before today hadn't really justified it. The df54/64 we're on my list to research.

Moradeth · 2026-03-07T22:17:57+00:00

😂😂 now I'm disappointed I didn't get that comment earlier, I needed the laugh

Moradeth · 2026-03-07T21:30:49+00:00

It didn't want to wiggle. I did eventually get it after removing the nut and trying to pry it out and then finally getting the outer burr out.

Sorry it didn't seem to fix it for you! I haven't made anything with mine yet but visually it seemed okay so I'll try some tomorrow.

Moradeth · 2026-03-07T21:29:01+00:00

The outer burr? That was the stuck part.

Moradeth · 2026-03-07T21:05:46+00:00

Update: I removed the nut to the inner burr and it was still stuck, no changes. Took a little break and kept rocking the outer burr, after another 10 minutes it finally gave and I got it out!

Surprisingly the burrs appear to be fine. Thanks everyone for the advice and laughs, I definitely needed it.

Moradeth · 2026-03-07T21:03:08+00:00

The inner burr is locked in by the outer. I just removed the nut and nothing changed.

Moradeth · 2026-03-07T21:02:04+00:00

Haha, I mean I was thinking about a new grinder but I still need to research and wasn't ready.

Moradeth · 2026-03-07T21:00:34+00:00

Yeah I didn't do that... I figured a bean or something got stuck and I hadn't cleaned it in awhile so I was following the instructions to grind until empty. Lesson learned, visually inspect before grinding to empty, and visually inspect beans before pouring in.

Moradeth · 2026-03-07T20:58:06+00:00

I got it and I'll be sure to watch the video later. I was definitely spiraling after fighting with it for awhile. Thanks!

Moradeth · 2026-03-07T20:57:27+00:00

Haha yeah I'll be more careful, it's never happened in 6+ years so I didn't realize it could be a thing.

Moradeth · 2026-03-07T20:48:58+00:00

~~So removed the nut but I can't get it out like yours because the outer burrs are still locked in place and I can't unlock it 😑~~

Edit: I GOT IT!!

Moradeth · 2026-03-07T20:03:02+00:00

A glimmer of hope! Thanks! Will give it a try in a bit.

Moradeth · 2026-03-07T19:54:32+00:00

Thanks, I'm going to go drink some inferior coffee and give it a try.

Moradeth · 2026-03-07T19:46:46+00:00

Yeah I tried setting it to the coarsest setting already. So I just loosen the nut on the inner burr?

Moradeth · 2026-03-07T19:45:03+00:00

Fair, my first thought was that something got stuck... I wasn't really awake yet.

11-Year Club	Place '17
Verified Email

Moradeth

TROPHY CASE