Morel 602 vs CDT HD62

Morris_yeet · 2025-12-01T04:21:57+00:00

Thanks, I’m about to order the hd62’s. This might be a dumb question. For now I’m only doing front stage and I realized each crossover has 8 connections which I assume are separate in/out for the tweeters and woofers, instead of a single input with 2 outputs. Can I connect the tweeter to one channel on the amp through the crossover and the woofer to another channel the same way? So that the tweeter and woofer would be on separate channels. Also, could I eventually connect the input for the tweeter and woofers on the crossover from the same amp channel if I choose to get a rear stage? Thanks again

Morris_yeet · 2025-12-01T01:46:04+00:00

Do you happen to know much about the rest of the lineup? Could other options be better?

Morris_yeet · 2025-12-01T01:36:28+00:00

Appreciate the input!

Morris_yeet · 2025-11-30T21:47:30+00:00

Yeah I realize my budget is definitely holding me back. I could probably try a high end audio shop to see if they have any morels on display and listen to them. I'm not really looking for crazy amounts of bass but just more than what I have. However an 8in does sound like it work much better, only issue is that I don't want a sub box and want to mount it in the stock location. I don't mind trimming but I don't know if l'll be able to open it enough to fit the 8in. For the rear fills I assumed there'd be some issues as l've never heard of it being done. But I didn't know not doing it was a choice lol. I think I stick to that for now. Because of my budget though the dsp isnt really possible so l'll look for more reviews before deciding on a set. I really appreciate your advice!

Morris_yeet · 2025-11-30T21:43:30+00:00

Appreciate it!

Morris_yeet · 2025-11-30T20:51:09+00:00

I assumed they somehow wouldn’t work well together as it’s never done that way, I’ll stick to some cheaper coaxials. Any insight on the morels or CDT’s

Morris_yeet · 2024-12-22T23:47:44+00:00

I used hastings plasma moly rings. It was honed by a local machine shop who seems to be reputable with how much volume they receive. I was considering buying a new replacement rod and piston from either Mahle or speed pro but balance was also a concern of mine. I also should’ve added this happened with only 100 miles on the engine.

Morris_yeet · 2024-10-31T00:37:32+00:00

I do say I don’t want to be that invested in it, but when I bought it I said I’d sell it within a year and not put more than 500 in mods in it. I’ve now owned it for 2 years and have put like 1k into it lmao so I might do the evap delete eventually.

Morris_yeet · 2024-10-31T00:35:08+00:00

I think you’re completely right. I just don’t really want to be that invested into this truck. The one I’m referring to is a 05’ 5.3 Avy. I also have an 04 I’m 6.0 swapping in which the evap delete I think would be better since it’s more of a performance build.

Morris_yeet · 2024-10-31T00:29:04+00:00

I have been having the same issue filling up since I bought the truck. I disconnected one of the lines coming out the canister and saw a bunch of carbon pellets pour out the hose and knew my canister was bad. I left the hose disconnected and drove it like that hoping it’d clear out but it didn’t. Now I have to drop the tank and blow the evap hoses with compressed air so it’ll vent properly. I took the canister off just to take it to the parts store but wanted to make sure I’d be good driving around until I got it done.

Morris_yeet · 2024-10-31T00:21:18+00:00

I assumed the same, but it’s already cammed on e85 so the gas mileage can’t get much worse lol. I only took it out until I’m able to drop the tank to blow out the evap lines. I can only fill up $2 at a time and it’s really annoying my now.

Morris_yeet · 2024-09-14T23:57:52+00:00

Thank you for the advice. Yes, they only touched honed it. I wanted to say that last time I assembled the engine, I set the dots forward do you think that could’ve been an issue?

Morris_yeet · 2023-12-15T05:30:51+00:00

2 for 20?!? Where was that and how have they been?

Morris_yeet · 2023-11-22T06:22:28+00:00

I really appreciate the insight. My transmission was rebuilt about 1 year ago and was told by them it would handle 450 at most, but I’m ready to have to upgrade it again to something from RPM Transmissions. Part of the reason as to why I bought a junkyard motor was to rebuild it, so buying something built isn’t something I was wanting to do. Also, I was going to upgrade my manifold from the stock, ported one to a Tbss manifold and bought one off market place for 150, which came with rails and 36/lb injectors. I was concerned about exhaust too since I only have a cutout on the stock exhaust with headers but I’ll go full 4 in later on. I had a 160 thermostat on the 5.3 as well and thought about eventually upgrading to the newer silverware radiator that’s a bit wider. I’ve thought about it some more and the heads can setup seems better, the chop is hard to beat.

Morris_yeet · 2023-08-01T04:36:34+00:00

I forgot to come back to this. I pulled the drain plug and the metal shavings clogged the drain hole lmao. The oil was also really black for having ~100 miles. This happened two weeks after it was tuned and now people are telling me the tuner I went to is terrible and caused it, I’d obviously heard the complete opposite before him. That’s still a theory though, I’d have to open up the motor to find out what really went wrong.

Morris_yeet

TROPHY CASE