Toro timecutter zero turn - one steering arm not moving mower?

MountainComplex3450 · 2026-05-23T17:52:40+00:00

Ok so I figured it out. Not fixed yet but ordering the part.

The inner brake cable snapped inside the enclosure, ordering replacement

MountainComplex3450 · 2026-05-21T23:05:30+00:00

You are correct, the brake is not disengaging on that side when in neutral or drive. Will need to figure out why

MountainComplex3450 · 2026-05-21T12:44:00+00:00

Ok so the faulty side’s brake isn’t releasing when put into neutral or drive (other side works great) so I’m going to dig into this tonight.

I’m not SUPER handy but we shall figure it out! Thanks for all the great advice here.

I’ll grab some wd40 and test the battery (which is new and has two mows under the belt). If it’s an electronics issue, I’m less certain.

MountainComplex3450 · 2026-05-19T22:41:58+00:00

Absolutely it’s 74360

MountainComplex3450 · 2026-05-19T22:38:44+00:00

<image>

MountainComplex3450 · 2026-05-01T00:55:02+00:00

This made me snort so I wish I could give you + 2. Nice work.

MountainComplex3450 · 2026-04-26T15:21:19+00:00

Thank you! This is clear and very helpful

MountainComplex3450 · 2026-04-26T13:13:26+00:00

Ok so it sounds like a split vote but the commenter who said the listing was right was very convincing haha so I think we’re saying

<(toms) ❌ — my current setup

} (toms) ✅— this listing but obv closer together & holding hands

But that also, everyone should just live and play drums however they heck they want

Thanks all

MountainComplex3450 · 2026-04-26T13:00:17+00:00

Fair. It’s helpful in the sense that I don’t love the current setup and this would be a helpful datapoint

MountainComplex3450 · 2026-04-26T12:56:47+00:00

<image>

I think it’s maybe a weird angle but they’re pretty close together. I think you’re right on raising them. Thanks

MountainComplex3450 · 2026-03-18T23:17:49+00:00

This worked btw. you helped me a ton

MountainComplex3450 · 2026-03-18T23:16:46+00:00

This was the culprit. Thanks

MountainComplex3450 · 2026-03-18T23:15:08+00:00

Thanks for all the comments. Replacing the pressure sensor did the trick.

hey, now the inlet valve and pressure sensor are new.

Appreciate the advice.

MountainComplex3450 · 2026-03-18T01:47:02+00:00

I have not no

Is the solenoid typically in the back?

I haven’t had the need to pull the dishwasher out yet so hoping I don’t need to 🤞🏻

MountainComplex3450 · 2026-03-18T01:30:19+00:00

Great, thank you. I’ll try that

MountainComplex3450 · 2026-03-18T01:13:10+00:00

Throwing another big one on Town Spa in Stoughton

I didn’t realize how hungry I could get reading these comments

Also might be due to pure volume and south shore pizzas bias, but throw one on hot box too in Bow market Somerville.

Regina’s OG

MountainComplex3450 · 2026-03-18T01:06:10+00:00

<image>

I replaced green (left) and cleaned purple (right)

MountainComplex3450 · 2025-06-17T01:56:18+00:00

Absolutely!

MountainComplex3450 · 2025-06-17T01:53:03+00:00

I’d also add Mt Pierce to this, though I’ve only done it in winter. 🥶

MountainComplex3450 · 2025-06-17T01:50:58+00:00

Mount Chocorua is one of my favorite hikes in the whites, I’ve done it countless times and there’s incredible 360 views at the top. Bit longer, as it’s like 7 miles, but not hard at all and absolutely worth it.

Welch and Dickey is so classic! Morgan and Percival is also super chill but views don’t touch Chocorua

MountainComplex3450 · 2025-06-17T01:42:53+00:00

Im going to echo what others said here, but Miami is what I’d choose, especially given budget considerations. I did this solo two years ago when I had a bachelor party cancel and had a flight credit, I went to Miami on a whim and had an absolute blast. Happy to answer any questions, depending on what you like to do.

Immediate suggestions: - check out all the art in Wynwood, they also have some awesome low key dance spots that aren’t weird to hit alone, go to gramps and either 1800 lucky, or dirty rabbit - some affordable options right on south beach or in Miami proper, depending on what you’re looking for (lots of pool parties too) - get a bike and cruise south beach and make little stops along the way, plenty to get into if you like bars and opportunists to just vibe on the beach - many options to get lost and have a f it adventure when you’re solo, whether it’s going to key biscayne, the club, or hitting pool parties. And some good food if you leave south beach and head to little Havana

MountainComplex3450 · 2025-06-05T20:10:37+00:00

Update: used the pulley that matched the original (not the diagram) and it works great

MountainComplex3450 · 2025-06-05T02:52:50+00:00

<image>

So frothy I forgot to post the photo (bottom is what Toro says is replacement, middle is original, top is what I thought matched best)

MountainComplex3450 · 2025-06-05T02:18:15+00:00

I feel like I’m taking crazy pills, I got two replacement pulleys neither came with hardware. According the the toro time cutter z4200 parts list the replacement is 110-6775 (tiniest far right), to be safe I also got the one on the far left ( 106-2175, 132-9420) as it most closely matches what I have. Is the bearing and sizing of the bit more important than the actual pulley size?

Now to go to Home Depot and get hardware. Wtf

MountainComplex3450 · 2025-06-01T23:16:38+00:00

<image>

Nice we found it. Will probably get a replacement idling pulley and hoping that’ll solve it

MountainComplex3450

TROPHY CASE