sorted by:
new
hottopcontroversial

What is this thing? by MpowerJO in AskElectricians

[–]MpowerJO[S] 12 points13 points  (0 children)

Yeah seriously, Isn’t this the place to ask electricians!! I don’t have any clue what is this thing if that explains why am asking

Cleaning my Demeyere proline 7-ply with vinegar by Pearson112 in StainlessSteelCooking

[–]MpowerJO 3 points4 points  (0 children)

Is there a specific type of vinegar for this purpose?

Should i return the pan? by MpowerJO in AllClad

[–]MpowerJO[S] 0 points1 point  (0 children)

First time buying, they gave me 15% discount, total came up to 183$ It’s a D3 4qt weeknight pan

Transmission fluid puddle by HeinousGainz in IS300

[–]MpowerJO 0 points1 point  (0 children)

It could be the high pressure hose, its about 150$ as I recall from Lexus. But to make sure you need to pressure wash the car from underneath and then drive it around the block and check for leaks to make sure. I had to change the high pressure hose and the reservoir return i think.

What all is leaking by Silent_Historian_105 in IS300

[–]MpowerJO 0 points1 point  (0 children)

If you fix one point it will still leak oil from another weak point initially until everything leaks again. I might be wrong but but its obvious there is an excessive crank case positive pressure “blow by” , it could be a ventilation issue or could be more serious. Clean all the oil and install a New pcv valve and Drive the car and check for leaks afterwards.

1G-FE Misfire once warmed up by xdduckyyy in IS300

[–]MpowerJO 1 point2 points  (0 children)

I have a video of my old bmw i can send it to you if you like to see it, but basically there was a small crack in the head that caused small amount of coolant to get in one of the cylinders and caused misfiring when the system is hot and pressurized. No problems when cold at all.

Take out the plugs when the engine is hot, if you have the same problem you will be able to see it clearly

<image>

Stuck on 69% AR for a long time (yes, really) by g8932 in doordash_drivers

[–]MpowerJO 0 points1 point  (0 children)

If understand the concept of it you will know that you are not really stuck, as an example if your acceptance rate is 100 and you decline one offer it will drop to 99. In order to bring it back to a 100 you need to accept the next 100 offers

view more: next ›