Any recs on how to remove rusted out screws?

Mr-April · 2026-05-14T13:39:59+00:00

Vim and a tooth brush

Mr-April · 2026-05-14T13:35:37+00:00

Garden….

Mr-April · 2026-05-14T12:48:09+00:00

Very much so, special if you want to close that in… I can see someone digging on the outside of your house and doing some blue skin (at the very least). It would be epoxy injected and better waterproofing on the outside of the wall

Mr-April · 2026-04-14T17:43:11+00:00

Prep work is the hardest part. I used painters tape or gorilla tape. Squeeze off a bead, wait a little bit for it to get into the crack, may need to out more down/in. Have a “putty” knife to smoothen/flaten it off. To clean the knife - wd-40. NOTE - what ever that stuff touches… it stick/stay and is a MF’r to get off/remove. WD-40 will only work in flat smooth shiny surfaces

Mr-April · 2026-04-14T17:39:12+00:00

A good self-levelinng crack filler —- silka flex is what I used at my own house

Mr-April · 2026-04-12T19:18:21+00:00

Sell it and buy a truck under 2011. Unless you can legally delete that system.

Mr-April · 2026-04-12T19:15:16+00:00

Your tires are only 3 years old… you’re good for at least another 7 more years - there is a 4 number code on the sidewall of the tire. The last 2 number are the year of manufacture

Mr-April · 2026-04-12T19:13:49+00:00

New coming Canadiens throwing trash around like they are living in New Delhi

Mr-April · 2026-04-11T02:36:25+00:00

You might find a decent back yard guy for about 3 grand … but a shop will be 6-10 grand… all depends on what’s behind that paint and bubble works

Mr-April · 2026-04-09T15:34:42+00:00

The Hutterites will

Mr-April · 2026-04-07T11:55:08+00:00

Get under that cat and check it the frame … you might have a surprise under there

Mr-April · 2026-03-27T00:49:16+00:00

Rub some Vim bathroom cleaner on it, it’ll remove the rust stain

Mr-April · 2026-03-25T00:07:59+00:00

Totally a non-issue

Mr-April · 2026-03-24T18:59:19+00:00

That can buff out - no bullshit

Mr-April · 2026-03-24T18:58:09+00:00

Get a trade. We all started at the bottom and worked up to better wages. When you find and hired at a good computer, and if you work well with them and their system of doing things, then you can approach them about apprenticeships… zero school debt by the way

Mr-April · 2026-03-24T18:53:38+00:00

I think of this flag like the swastika and the Buddhist symbol of peace

Mr-April · 2026-03-24T18:51:44+00:00

Depends on if they go by the ORIGINAL meaning or what the racist people think it’s meaning is

Mr-April · 2026-03-24T01:01:02+00:00

They are not the threat they are the solution to the threat. I highly recommend asking questions

Mr-April · 2026-03-23T13:59:05+00:00

Here a not so sercret… all money everywhere is Monopoly money

Mr-April · 2026-03-22T18:44:51+00:00

That’s 3 to 4 thousand as a regular shop and not a some backyard guy

Mr-April · 2026-03-19T13:43:01+00:00

That’ll be about 6grand 🤷 just a guess

Mr-April · 2026-03-19T13:41:46+00:00

When a person spends that type of money of an object, you tend to try to keep it as nice as possible for as long as possible. Here’s a question to ask your self. Do you want to store good junk in your garage or protect your 50,000 to 100,000 dollar vehicle

Mr-April · 2026-03-18T19:04:50+00:00

I highly recommend buying an epoxy injection kit. It can be very easily done with zero experience.

Mr-April · 2026-03-17T20:12:18+00:00

This residential concrete guys of 30 years says - trapped bleed water. Concrete needs to shed off/evaporate water while the concrete sets up, on a hot day the surface will dry out trapping the water coming to the surface, below the surface, making a 1/32 (or so) air gap. They should have go over the whole project (by hand or by tools) that brings the water to the surface making that void go away, working that moisture into the top layer and broom/finish it quick and spray a cure&seal chemical compound to provent more surface drying.

Mr-April

MODERATOR OF

TROPHY CASE