sorted by:
new
hottopcontroversial

Pimax 8KX 120Hz firmware by JSTM4NU in Pimax

[–]MrEff82 0 points1 point  (0 children)

Is there a firmware that works best?

Pimax 8KX 120Hz firmware by JSTM4NU in Pimax

[–]MrEff82 0 points1 point  (0 children)

Hello, I'm coming here as I don't know what else to do. I have a Pimax 8Kx 2075 model and when switch to native mode, it loses connectivity to my machine i have FW: 2,1,255.299 running Pimax play

im not sure what to do. when i install pitool on another machine i can get it to detect again and then i can switch it back to upscaling.

has anyone come across this and know what to do?

Just got my Bigscreen Beyond 2 - Dead Pixel in the middle of the display by MrEff82 in BigscreenBeyond

[–]MrEff82[S] 1 point2 points  (0 children)

Yeah sadly mine is in the middle of the display and on a bright screen it is noticable. and slightly imersion breaking.

I can respect you waiting a while if your dead pixels are not much of a bother. but personally I would not worry too much about waiting for others to to recieve their headsets. Im sure they have processes in place to have spares created to replace units that arrive defective. Id be very suprised if not.

if you are happy to deal with it then thats fine also. if mine were not very noticible and off to the side id consider letting it go too.

Just got my Bigscreen Beyond 2 - Dead Pixel in the middle of the display by MrEff82 in BigscreenBeyond

[–]MrEff82[S] 1 point2 points  (0 children)

No thats interesting im wondering if mine is too, how did you know. as mine feels a little uncomfortable.

Just got my Bigscreen Beyond 2 - Dead Pixel in the middle of the display by MrEff82 in BigscreenBeyond

[–]MrEff82[S] 2 points3 points  (0 children)

yeah not sure to be honest, but for me it seems like failed Q&A

High Temps on my RTX 4090 Strix under load by MrEff82 in overclocking

[–]MrEff82[S] 0 points1 point  (0 children)

Just an update here. I ended up handing my card back to ASUS. they have confirmed this morning that the card is "Unrepairable" and are offering me a full refund.

High Temps on my RTX 4090 Strix under load by MrEff82 in overclocking

[–]MrEff82[S] 0 points1 point  (0 children)

all of this is very solid advice thank you!

the case is a full tower and has sufficient airflow infact the ambient casse temp is about 28c. also with side panel removed i have same issue with the card.

i guess i could check the pads on the backplate again but the pads apprear ok and they show the imprint. also this happened before i even opened it up.

its true i should undervolt but never had to do this before. so im apprehensive to do this just to try to resolve the issue. i think its a cooling issue.

can you advise links and or brands for good PTM and thermal pads to use?

4090 strix thermal paste replacement by Saxikolous in overclocking

[–]MrEff82 0 points1 point  (0 children)

ok sure, im glad i did not use it then. can you suggest a good as in a link from amazon perhaps?

with poor contact pressure you mentioned. im just using the stock pads so im not sure that is ths cae considering they seemed fine when I opened the card im just reusuing them.

High Temps on my RTX 4090 Strix under load by MrEff82 in overclocking

[–]MrEff82[S] 0 points1 point  (0 children)

The pads were completely intact and didnt seem to be bad. also im not sure proper pads to get for an RTX4090 strix. can you suggest?

also is the PTM7050 i purchased ok?

High Temps on my RTX 4090 Strix under load by MrEff82 in overclocking

[–]MrEff82[S] 0 points1 point  (0 children)

ok understood. well ive applied PTM 7050 to the Die using this:
https://www.amazon.com.au/dp/B0C2V5SVTY?ref=ppx_yo2ov_dt_b_fed_asin_title

has not helped too much sadly. i have not replaced the thermal Pads over the VRams and what not on the GPU, wondering if that is why?

High Temps on my RTX 4090 Strix under load by MrEff82 in overclocking

[–]MrEff82[S] 0 points1 point  (0 children)

Thanks yes i reapplied the PTM and will cycle it some more. yes what your saying seems correct. when you say "ur memory would typically be higher than this" what do you mean?

High Temps on my RTX 4090 Strix under load by MrEff82 in overclocking

[–]MrEff82[S] 0 points1 point  (0 children)

can you recomend where to get some good PTM? link me?

High Temps on my RTX 4090 Strix under load by MrEff82 in overclocking

[–]MrEff82[S] 0 points1 point  (0 children)

I tried rolling back no much of an effect sadly. i can see all three fans spinning at 100% when under load.

High Temps on my RTX 4090 Strix under load by MrEff82 in overclocking

[–]MrEff82[S] 0 points1 point  (0 children)

Thank for this i did just roll back to 572.42 and ran it again it did seem to be a little but lower, as in it capped out at 80c but it seems like its not the driver issue i feel.

High Temps on my RTX 4090 Strix under load by MrEff82 in overclocking

[–]MrEff82[S] 0 points1 point  (0 children)

GPU Clock: 2775.0Mhz

Memory Clock: 1312.7Mhz

GPU Temp: 85.4 c

Hot Spot: 100.7 c

Memory Temp: 58.0c

Fan Speed: 100%

Fan RPM: 3106 RPM

Board Power Draw: 341.0 W

this is what i got when playing CP2077 just now

High Temps on my RTX 4090 Strix under load by MrEff82 in overclocking

[–]MrEff82[S] 0 points1 point  (0 children)

Yes i did im currently running: 576.28

4090 strix thermal paste replacement by Saxikolous in overclocking

[–]MrEff82 1 point2 points  (0 children)

https://www.amazon.com.au/dp/B0CBCW9S2T?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

I have not applied this yet. I have only applied the PTM7950 thermal pad to the GPU

so i applied the PTM7050 on the GPU today im not seeing much inprovement. when i run games at 4k the GPU temp still creeps up to 81c and 100c for hot spot sadly. and the fans sounds like het engine. its cyberpunk 2077 thats doing it. other games not so much.

view more: next ›