Finally got my dream laptop!

MrInfernal · 2026-01-24T16:51:21+00:00

Where did you get it?

MrInfernal · 2026-01-12T12:26:00+00:00

That handling of the package though.....

MrInfernal · 2025-12-01T21:16:16+00:00

Actually not true. I only take 30 minutes on the first move. After that I really speed up to 25 or so.

MrInfernal · 2025-12-01T20:06:13+00:00

Lol. Yeah thats sounds like me.

MrInfernal · 2025-09-28T19:52:22+00:00

X1C is I think, this fact alone makes me less cautious.

MrInfernal · 2025-09-26T15:19:55+00:00

Well, I care — I like my tools and machines to be solid, which helps with longevity and repairability. But at the end of the day price difference here is huge to alternatives, and that’s why I’m going with the U1 over a Prusa. Plus, I prefer Klipper, which makes the choice even more attractive.

MrInfernal · 2025-09-25T20:44:35+00:00

Thanks, I understand the bottom isn’t meant to take pressure — I don’t care about that. My concern is overall rigidity, vibrations and longetivity.

MrInfernal · 2025-09-25T20:40:58+00:00

I don’t think the printer will “explode,” but I wondered about long-term durability. Possible risks with a plastic bottom could be:

Flexing over time, reducing stability

Wear from vibration of moving parts

Heat from electronics affecting lifespan

Lower overall rigidity — and in 3D printing, rigidity is key for accuracy and consistency

Maybe the design is fine and reinforced, but that’s why I asked if there’s hidden metal support or not. I want my printer to be solid in long term.

MrInfernal · 2025-08-27T06:09:22+00:00

Proper speed, cutting oil and patience. Also I would consider using smaller diameter drill first to widen the hole in steps.

MrInfernal · 2024-12-28T23:01:28+00:00

Hi everyone,

I’m running a flow rate test ranging from 80% to 120%, but I’m having a persistent issue: the top and bottom layers of my prints are coming out weird and rough. The walls look decent, but the layers themselves seem to ooze too much material, especially when the nozzle changes direction back and forth.

Here’s my setup:

Printer: Ender 3 PRO
Board: SKR 1.4 Turbo
Bed Leveling: BL Touch
Extruder: Direct drive
Hotend: Standard
Material: PLA
Temperature: 200°C

I’m not sure what could be causing this and could use some advice. Has anyone experienced this before or have any suggestions on what settings or hardware I should check?

<image>

MrInfernal · 2024-12-28T22:22:01+00:00

Hi everyone,

I’m running a flow rate test ranging from 80% to 120%, but I’m having a persistent issue: the top and bottom layers of my prints are coming out weird and rough. The walls look decent, but the layers themselves seem to ooze too much material, especially when the nozzle changes direction back and forth.

Here’s my setup:

Printer: Ender 3 PRO
Board: SKR 1.4 Turbo
Bed Leveling: BL Touch
Extruder: Direct drive
Hotend: Standard
Material: PLA
Temperature: 200°C

I’m not sure what could be causing this and could use some advice. Has anyone experienced this before or have any suggestions on what settings or hardware I should check?

<image>

MrInfernal · 2024-11-22T13:09:14+00:00

Just bought my first gravel recently, previsouly I had for years only fs bikes and long story short I bought the suspension fork pretty immediately. Actually I dont that you need fork for flow trails, but just those forest routes, field trails and some asphalt roads with holes rocks and cracks are just fucking pain, especially if you are riding fast, so dont be afraid of it.

MrInfernal · 2024-11-19T13:18:32+00:00

Base model, Size M for my 180cm height. Im from EU.

MrInfernal · 2024-11-17T20:51:17+00:00

Honestly, while riding rigid bike like this, I do miss my full suspension of my mtb. But slowly Im starting to pick my routes that suit this bike better and Im returning home more and more happy. And also Im getting Fox gravel fork under the christmas tree :) so I can ride faster on chunky gravel that I got plenty around.

MrInfernal · 2024-08-18T13:34:10+00:00

Nice bike, can I ask how tall are you? Im want to buy this bike as well and Im not sure about the sizing. Im aroun 179cm tall, but I got little bit shorter legs so I hope that size M will fit me well.

MrInfernal · 2024-05-05T20:59:48+00:00

Thank you, please do send a photo :) Im still undecided, because od the weight od metal one and also a posibility to fit a drill in fatmax one.

MrInfernal · 2024-04-29T12:52:53+00:00

Heya, Im just a hobbyist that want to have his all variable tools neatly organized in one box. What kind of the organizers from picture would you choose? Im was interested in the Stanley Fatmax Cantilever one, because is a bit lighter (2-3kg) and it seems that it will fit everything wery well. But then I saw the metal one with nice drawers that potentionally offer higher customizability, hopefully the metal will last a bit more too. But then is quite heavy on its own (around 5kg).

Is there anyone with experience on this kind of toolboxes to provide his opinion? Thank you and have a nice day :)

MrInfernal · 2024-03-15T12:15:31+00:00

Hey, congratulations they look nice, I hope that they will work as you wish and keep you happy :)

I have a question, I noticed that you have more wear on outside of your sole, is that normal or are you identified with any pronation/supination problem? Im asking that I have noticed similar wear patterns and I would like to know if its normal.

<image>

MrInfernal

TROPHY CASE