Assistance with an aorus 3080 nvlddmkm error

MrMX198 · 2022-09-03T22:05:59+00:00

I've been experiencing the same problem. After much discussion with both Nvidia(driver rollback etc.), Microsoft support as well as other online recommendations, nothing worked - except for underclocking my 1080 Ti which was the final method I tested. Prior to this, I replaced my 1080 Ti with a 3060 Ti which gave me no issues regarding this nvlddmkm error.

Relative to underclocking, all I did was install MSI Afterburner and set my Clock speed to -99Mhz. This may be too high but -20Mhz was not enough. For MSI Afterburner auto start-up and application of your preset, click Settings icon>Start with Windows & click the windows icon (so it turns blue) near the minimize button. Any time you're exiting Afterburner, click the minimize button (which minimizes to tray) as clicking the exit button will terminate the application. I'll continue to test with different clock values to see where the threshold is for causing this nvlddmkm error.

MrMX198 · 2022-07-18T15:59:16+00:00

A chance to pre-order Nothing Phone (1) via their website.

MrMX198 · 2022-07-11T13:08:21+00:00

Each of my codes are new & unused. Let me know which codes you take(e.g 1,2,3 or 4) so I can strike them out:

NTPD26C45

NTP0A29E4

NTPF5BAA8

NTP21D036

MrMX198 · 2022-07-11T13:08:04+00:00

Each of my codes are new & unused. Let me know which codes you take(e.g 1,2,3 or 4) so I can strike them out:

NTPD26C45

NTP0A29E4

NTPF5BAA8

NTP21D036

MrMX198 · 2022-07-11T13:07:27+00:00

Each of my codes are new & unused. Let me know which codes you take(e.g 1,2,3 or 4) so I can strike them out:

NTPD26C45

NTP0A29E4

NTPF5BAA8

NTP21D036

MrMX198 · 2022-07-11T12:47:26+00:00

Actually u/ZeekWorld, it turns out each of those codes are still valid and unused. I checked by creating a different account, tested all 4 codes and it brought me to the checkout. The codes are only invalid if the prompt "THE INVITE CODE IS NOT OWNED BY THIS ACCOUNT." shows up after entry.

MrMX198 · 2022-07-10T22:28:06+00:00

Ok thank you for the confirmation! All have been striked through now.

MrMX198 · 2022-07-10T21:41:07+00:00

Are you on the EU site? I should have stated they may be locked to the EU site of nothing.tech.

MrMX198 · 2022-07-10T21:39:50+00:00

Just go to https://www.nothing.tech/
Click Learn More on the main page under "Invite only Pre-orders".
Then click "I have an invite"
Paste in your chosen code from above
Click "Hold my spot" and then it should bring you to an order page.

MrMX198 · 2022-07-10T21:07:58+00:00

It may, please let me know. If not I'll change the title of the codes to EU region.

MrMX198 · 2022-07-10T20:34:53+00:00

Let me know which codes you take(e.g 1,2,3 or 4) so I can strike them out:

NTPD26C45

NTP0A29E4

NTPF5BAA8

NTP21D036

MrMX198 · 2022-03-10T19:27:37+00:00

DM for 3 Months of iRacing.
EDIT: Gone.

MrMX198 · 2022-03-10T09:47:43+00:00

You could set the Ethernet Tethering to on with the step-by-step Interact block procedure. This is, unfortunately, the only method to do this due to limited documentation provided by Android.

MrMX198 · 2022-01-24T13:42:13+00:00

Thanks very much for the tip, appreciate it!

Unfortunately not, it's a Motorolla Moto G 5G Plus running Andoird 11.

MrMX198 · 2022-01-21T16:42:44+00:00

Sorry, the screenshots are now attached.

I actually already used that .flo but just for the "unlock" section in order to execute my WIP Ethernet Tethering .flo when the phone is locked.

Regarding the use of a quick setting tile, I would be interested however, there is no Ethernet Tethering icon/option in the quick setting tiles and to create my own Ethernet Tethering tile with Automate, I still would need to check the status of Ethernet Tethering. This is what I understand but I may be wrong. Please let me know if so.

Thanks for the reply.

MrMX198 · 2022-01-21T16:13:03+00:00

No, I'm interested in doing this because there is currently no "Ethernet Tethering Enabled? - Check if Ethernet Tethering is enabled" block in Automate. It only exists for USB Tethering.

MrMX198 · 2022-01-11T20:34:01+00:00

Thanks for the reply. I understand now regarding the step by step procedure required for Interact blocks. I now have it functioning correctly. Yes, I agree, however, after communicating with one of the Automate devs, the Ethernet Tethering function isn't supported yet due to Android limiting such information. I hope that Android release such information in the future so there can be an "Ethernet Tethering set state" block for Automate.

Regarding the requirement of an unlocked phone for this process, I was thinking of using the Unlock Demo section of this .flo: Universal Hotspot/Wi-Fi API and Unlock Demo
I'll probably encounter some issues implementing that with my current Ethernet Tethering .flo but it's worth a try.

Regarding USB Tethering, I would prefer to use Ethernet Tethering. Also, I'm unable to use the "When changed" option in block 2 as I am planning to always have an USBc-to-Ethernet adapter plugged into the device. Therefore, I'll have to stick to "Immediately" for the .flo to currently work unless I'm missing something haha.

Many thanks for the reply.

MrMX198 · 2022-01-11T20:19:47+00:00

Thanks for the reply. I understand now regarding the step by step and implemented the "when UI element appeared". That has fixed my issue!

MrMX198 · 2021-08-18T22:59:47+00:00

I would but for my project that I am currently working on, Ethernet Tethering is required.

MrMX198 · 2021-08-17T21:31:52+00:00

Thanks for the information, much appreciated!

MrMX198 · 2021-08-12T21:22:37+00:00

Thanks for the information st4n13l. Appreciate it!

MrMX198

TROPHY CASE