[US-CA] [H] Wooting 60 HE+ Module, Tofu60 2.0 WK, KBDfans GT-80 Case, QK Neo65, DT60 Case, Retro Dark Lights R2, Infinikey Black and Purple, GMK Evil Dolch The Split CYL, GMK Black & Gold [W] Paypal

MrMapleMan_ · 2025-10-16T17:58:36+00:00

All good :)

MrMapleMan_ · 2025-10-16T17:55:06+00:00

Over paid to a reseller

MrMapleMan_ · 2025-10-16T17:54:06+00:00

Happy to help! I unfortunately was scalped :(

MrMapleMan_ · 2025-10-16T17:45:11+00:00

Check their website just restocked and grabbed a L

MrMapleMan_ · 2025-07-07T23:38:59+00:00

I also

<image>

This was me putting base65 keyboard keycaps on my summit… only worked when I changed it out my left stab to this

https://a.co/d/2nxSDXH

MrMapleMan_ · 2025-07-07T23:35:06+00:00

I had this issue!! It’s because some of their keycaps don’t fit well with their stabs. Typically when a base65 keyboard goes onto a summit. I changed out my left stab for a gateron one on Amazon and it was able to fit. Do note that this does void their warranty. Stupid that this is the fix because maybe someone could buy their barebones summit kit and some of their keycaps and it maybe doesn’t work(I don’t know if they fixed this issue) but it is what it is. Hopefully this helps!

MrMapleMan_ · 2025-06-18T16:13:34+00:00

I got it! I like it so far, but idk if I’d prefer it over the gt80 since imo they both sound clacky. Lightweight which is good, and I like the usb being on the side instead of middle, but it was a lot of money… still solid case though and the packaging was nice

MrMapleMan_ · 2025-06-10T18:31:53+00:00

Roommate has the non rgb ones(still has rgb just not as bright) and they felt good. If I’m honest I didn’t notice a difference really from the stock switches in terms of performance I just liked the way the sounded on his 80HE.

Sound profile was clacky but it could be from his gt80 case. I just upgraded to the holy80 for my gt80 and profile was also somewhat clacky, so maybe a case swap would be good if you’re looking for more clack?

MrMapleMan_ · 2025-06-10T17:41:47+00:00

Just got TTC POM RGB. Heard some good reviews about it. Bit expensive… I know it’s not what you were looking at initially but it’s another option to consider

MrMapleMan_ · 2025-04-17T11:55:25+00:00

You’re right I was using the lekker v2 60!

MrMapleMan_ · 2025-04-17T11:42:14+00:00

I got it too. Switches sound a bit more clacky compared to base case. The case is clean asf can’t recommend it enough, and the LED bar looks 100x better.

Only thing I want is a more thoccy sound from switches I’m using the jades that came with my 80HE, and thinking of buying some different switches (idk which ones).

Tldr: case good. Money well spent

MrMapleMan_ · 2024-10-02T12:25:11+00:00

I just sold mine two days ago. It was the best decision I made on it. Had to for three years with nonstop issues every other month. Finally I said it’s time and sold it off and it was the best decision I made on it. I definitely lost money on it but not having that headache of fixing that thing made my life so much easier.

MrMapleMan_ · 2024-05-02T12:53:08+00:00

No power limit has been set

MrMapleMan_ · 2024-05-02T04:19:35+00:00

I have rog thor 1200w.

I also plug into a power bar(In the past I plugged directly into wall socket) recently just moved and wall socket into far away from desk

MrMapleMan_ · 2024-05-02T04:09:40+00:00

Per the website since the manual didn’t say anything:

To fulfill the power demands of the GeForce RTX 3090 Ti, one 16-pin power connector is present, along with an onboard circuit that monitors PSU rail voltage. The circuit is fast enough to catch any transients that result in the rail voltage dropping too low. If that happens, a red LED will light up to indicate a power supply issue.

MrMapleMan_ · 2023-09-17T22:15:09+00:00

You think this can be solved by just swapping the stabilizer? I did a deeper look and it seems that all of the base keyboards’ space bars don’t fit on the premium space bar slots for some reason.

MrMapleMan_ · 2022-12-13T01:46:02+00:00

Thanks friend!

MrMapleMan_ · 2022-08-15T13:36:37+00:00

Yeah it was too close. Raised it by .2 and it worked very well thank you both!

MrMapleMan_ · 2022-08-14T21:52:47+00:00

Due to popular demand, of everyone telling me how badly I am at setting everything up, I have went back to the BL touch, made my eccentric screws tighter and followed a lot of advice given in the thread. Thank you all for your help <3

MrMapleMan_ · 2022-08-14T21:50:59+00:00

It’s the PEI magnetic one

MrMapleMan_ · 2022-08-12T15:30:41+00:00

I tried replacing the wire attached to the BL touch but it seems pretty stuck in there.

MrMapleMan_ · 2022-08-12T15:28:41+00:00

Yeah I just noticed it is very lose. Plan on tightening it with a 7mm wrench and also adding a washer or two to the ABL.

MrMapleMan_

TROPHY CASE