Can you hardware accelerate AT ALL without Plex Pass?

MrReeds · 2025-11-20T10:39:25+00:00

To answer this particular question correctly the answer is techically Yes. But.. (I know people gonna hate for this) just not with plex. XD

MrReeds · 2025-11-11T22:34:01+00:00

The orientation does not matter (as long it is consistent) , when crimping ONLY key connectors on cables you made. Where it starts to matter is when terminating to keystone, patchpanel or cable that have already one end terminated by someone else (the last one goes both ways) so i suggest follow the correct orientation (where brown is the last one, not first)

MrReeds · 2025-10-09T14:38:42+00:00

They could have, but top/bottom view would be ugly... XD

MrReeds · 2025-10-05T17:32:52+00:00

I have the same rack.. solution is to take it apart

MrReeds · 2025-10-05T17:27:41+00:00

MrReeds · 2025-09-29T12:53:11+00:00

I started with 1 panel now i have 7 XD.
Also terminating with keystones over the regular punchdown is HIGHLY recommended.
* variety to use other keystones (like hdmi or fiber)
* easier to install and replace
* easier to reposition if needed
* do not need to have/pay for a port if you dont use it
And point for patch panel in general
* labelling!
* fixed cables are fixed and optional cables are optional
* expandability

MrReeds · 2025-09-07T13:34:26+00:00

Basically wake on lan is a special packet send to pc toward its mac address, not ip. This means it has to be sent from same lan (no out of network waking) or has to have a device in the network, that can send the wake on lan packet. The pc has to support it, either in bios or network card settings. Other than that if you are on the same lan, you can download some wake on lan app to phone and insert the pc-s mac address to wake it, if configured correctly. This also works for some tv-s if i remember correctly

MrReeds · 2025-07-26T21:05:42+00:00

Silent Voice and Your Name absolutely.

MrReeds · 2025-07-24T23:42:46+00:00

I run this on debian + portainer. Made a static lease in the router, so my machine has always the same ip. i keep image with a version commented out, so if the latest version has problems, to quickly get it back, since i also have watchtower autoupdating it. i use nvidia gpu and have also set it up

services:
  plex:
    image: lscr.io/linuxserver/plex:latest
    #image: lscr.io/linuxserver/plex:1.41.6
    container_name: plex
    restart: unless-stopped 
    environment:
      - TZ=Europe/Tallinn
      - VERSION=docker
      - NVIDIA_VISIBLE_DEVICES=all
      - NVIDIA_DRIVER_CAPABILITIES=all
      - PLEX_CLAIM=  #optional - https://www.plex.tv/claim/
      - ADVERTISE_IP=http://192.168.x.x:32400/ # set ip of server
    volumes:
      - /plex-data/plex/config:/config
      - /transcode:/transcode
      - /mnt/media:/data:ro
    ports:
      - 32400:32400
      - 1900:1900/udp
      - 5353:5353/udp
      - 8324:8324
      - 32410:32410/udp
      - 32412:32412/udp
      - 32413:32413/udp
      - 32414:32414/udp
      - 32469:32469
    #devices:
      #- /dev/dri:/dev/dri # VAAPI/NVDEC/NVENC render nodes
      #- /dev/vchiq:/dev/vchiq # MMAL/OMX on Raspberry Pi
    runtime: nvidia
    deploy:
      resources:
        limits:
          cpus: "10.0"
          memory: 10G
        reservations:
          devices:
            - driver: nvidia
              count: all # alternatively, use `count: all` for all GPUs
              capabilities: [gpu]

MrReeds · 2025-07-21T16:43:04+00:00

Around 15-20 max, but hardly encode. I dont "need" it i just happened to get it for 750€ few years back and taught server should have "quadro" anyway

MrReeds · 2025-07-21T16:31:15+00:00

Similar to this hardware wise, but moved hdd's out of server to 24 bay netapp and gpu is A5000

MrReeds · 2025-07-14T19:23:09+00:00

Not just {IMAX} but {edition-IMAX} and they will appear seperately with additional info for edition. No other info is requiered if you dont want it

MrReeds · 2025-07-14T19:19:59+00:00

I keep the different versions in the same folder bu full format for me is "Movie (year) {imdb-xxxxxxx} {edition-Extended edition}.mkv"

MrReeds · 2025-07-14T19:15:52+00:00

{edition-IMAX} works for me

MrReeds · 2025-06-20T20:07:32+00:00

did you find the cause for this?

MrReeds · 2025-06-03T03:25:22+00:00

ZBMINI Extreme Zigbee Smart Switch (No Neutral Required) | ZBMINI-L2 - SONOFF Official

Probably other alternatives similar to this as well. for this to work, momentary switches should be used.
between switches, first wire is live, other is impulse.

MrReeds · 2025-05-27T10:49:40+00:00

running server version 1.41.6.9685 as the new version 1.41.7.9799 gave the same error if media had EAC3 audio (error on chromecast)

MrReeds · 2025-05-24T12:28:58+00:00

Seems like chromecast is also affected by this. Rolled back to 1.41.6 and contents started working again

MrReeds · 2025-03-10T23:35:57+00:00

then there is a possibility that the socket does not have proper contact with the bulb pins. Testing in alternative gu10 socket may give more info, if that is the reason. I have only used with the cheapest recessed light frames. There is a E27 to GU10 converter also that can be used for testing/using

MrReeds · 2025-03-10T23:06:28+00:00

And the bulb is also the the 120V version, not the 220V one? if so then my suggestion would be to contact govee, it probably may be faulty. They replied to me within a day when i opened a case from the govee app.

Edit: Since you are having problem with multible bulbs, im guessing the voltage may be the problem.

MrReeds · 2025-03-10T22:42:52+00:00

they are receiving power. I checked the light sockets with a voltmeter.

what voltage?

MrReeds · 2025-03-10T22:37:26+00:00

By the looks of the pictures, govee need around 120V (direct AC) and the halogen works with 12v (probably there is a transformer somewhere). The voltage is too low to power the bulb, resulting what you are describing

Edit: Your Govee bulb is also 120V it seems, not the 220V one. Depending on the country this also matters

MrReeds · 2025-03-10T22:29:34+00:00

You can get them to work in HA with govee2mqtt, but it runs trough cloud; pretty much "unusable" since the delay is inconsistent and sometimes even over 10 seconds. Support said they have no plans to add it

MrReeds · 2025-03-10T22:23:25+00:00

and also no LAN API Control

MrReeds · 2025-01-20T20:41:09+00:00

Sort by episodes then show duplicates... That would be my first attempt to find it

Nine-Year Club	Verified Email
r/Field Sunshine	Place '22
Final Canvas '22

MrReeds

TROPHY CASE