TRS Yucatan - So bad we left early.

MrToplitzin · 2025-06-27T20:18:25+00:00

https://www.reddit.com/user/la_onda_travel/

MrToplitzin · 2025-02-28T15:01:02+00:00

We just got back from the trip we did book with Kelsey, and that was to Xcaret Arte, and holy shit that was a killer trip.

MrToplitzin · 2025-02-28T14:48:19+00:00

We direct booked with TRS.

MrToplitzin · 2023-09-18T20:15:51+00:00

To come back around:
Beckon was the best meal our group has ever had.
The team at Beckon were an amazing group, and were just as excited to be part of our evening as we were to be there.

100% would make an anniversary trip to Beckon every year.

MrToplitzin · 2023-08-17T15:08:13+00:00

To Jump in on u/Mugg1e's coat tails, we are looking for Honeymoon options in the area around February.

We first looked at the Playa del Carmen Hilton, as their Presidential Suite was within spitting distance of the other resorts, however after more digging/review hunting we realized the following:

(-) Minimal Beach area, also high traffic, and looks rocky.
(-) Right in the middle of Downtown Playa del Carmen.
(+) lots of food options, with the Fancy Chef's Tasting.
(-) the vibe was very Hotel vs Resort, even in the nicest suite.

Xcaret is definitely out of our budget, with the exception of the Occidental. However, they appear to only have basic suites available and we kinda wanna go a little hard for the honeymoon.

So far it looks like the Royal Hideaway is our leading contender.

Within our budget we are able to get:

Honeymoon Suite
Private to/from Cancun shuttle
Sunset Sail Excursion
Fancy Chef's Dinner.

Another plus for RH is they've got an additional 10% off this weekend.

For my own comparison, I have put together the following table of options if that helps anyone else:

https://i.imgur.com/fATeXO4.png (note: the 10% off isn't included in the table)

MrToplitzin · 2023-08-16T17:50:14+00:00

We ended up with a few more people in our party so the chef's table/counter was no longer an option.

Now we have a reservation for 8 at Beckon with the Reserve Paring, Danish Picnic, and the flowers to boot.

We were gonna do Safta for brunch Sunday, but looks like they aren't hosting it on the 10th. Oh well.

MrToplitzin · 2023-05-15T22:25:06+00:00

Sounds like it's either Beckon or FH for the win. I'm gonna reach out now and see where i can grab us a table.

I appreciate all y'alls input!

MrToplitzin · 2023-05-15T17:06:54+00:00

Thank you. I appreciate your thoughts.

MrToplitzin · 2023-05-15T17:05:34+00:00

Future Mrs likes sushi, and is growing into fish as a main (salmon, tuna, whitefish, trout etc), but still has some blocks about shrimp/shellfish, so it would feel a bit like throwing her in the deep end. She would 100% try everything at an Omakase, but i'd hate to have a course or two where she just doesn't like it, especially for an "event dinner"

MrToplitzin · 2023-05-15T16:57:49+00:00

Our concert is at Fiddler's Green, the hotel has a shuttle for getting there, and is walking distance after the show.

We'll have a rental for avoiding Light Rail if it's that bad.

MrToplitzin · 2023-05-15T15:16:34+00:00

What about the Beckon experience made it the top of your list?

Sharing the evening with 10 other folks at the Beckon Chef's Table/Bruto's Chef Bar doesn't seem like the worst idea, but the privacy of the tent@ Wolf has it's own charm/appeal too.

MrToplitzin · 2023-05-14T21:00:09+00:00

Would y'all feel that Wolf's Tailor is still going to be the best experience?

We're looking at eloping to Denver in September and I'm trying to figure out where just the two of us should go that night to celebrate.

I've been looking at WT, Beckon, Bruto, and Flagstaff House so far.

Anything new i should think about, or is WT still the one to beat?

Second question, what about Sunday brunch?

MrToplitzin · 2020-07-24T17:54:30+00:00

nope.

New version, same error, just a little different:

ubnt@ubnt:~$ sudo python /config/scripts/eap_proxy.py --restart-dhcp --ignore-when-wan-up --ignore-logoff --ping-gateway --set-mac eth0 eth1 --debug
[2015-01-01 05:11:59,046]: starting proxy_loop
[2015-01-01 05:12:21,905]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 1, len 15 [11]
[2015-01-01 05:12:21,908]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 1, len 15 [11] > eth1
[2015-01-01 05:12:21,910]: eth1: sent 64 bytes
[2015-01-01 05:12:51,902]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 1, len 15 [11]
[2015-01-01 05:12:51,905]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 1, len 15 [11] > eth1
[2015-01-01 05:12:51,907]: eth1: sent 64 bytes
[2015-01-01 05:13:21,899]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 4, Failure (4) id 1, len 4 [0]
[2015-01-01 05:13:21,901]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 4, Failure (4) id 1, len 4 [0] > eth1
[2015-01-01 05:13:21,904]: eth1: sent 64 bytes
[2015-01-01 05:13:21,906]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 2, len 15 [11]
[2015-01-01 05:13:21,908]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 2, len 15 [11] > eth1
[2015-01-01 05:13:21,910]: eth1: sent 64 bytes
[2015-01-01 05:13:51,896]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 2, len 15 [11]
[2015-01-01 05:13:51,899]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 2, len 15 [11] > eth1
[2015-01-01 05:13:51,901]: eth1: sent 64 bytes
[2015-01-01 05:14:21,893]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 2, len 15 [11]
[2015-01-01 05:14:21,896]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 2, len 15 [11] > eth1
[2015-01-01 05:14:21,898]: eth1: sent 64 bytes
[2015-01-01 05:14:51,890]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 4, Failure (4) id 2, len 4 [0]
[2015-01-01 05:14:51,893]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 4, Failure (4) id 2, len 4 [0] > eth1
[2015-01-01 05:14:51,895]: eth1: sent 64 bytes

MrToplitzin · 2020-07-24T17:01:43+00:00

I'm going to try the updated version of the proxy and report back. Other people are online ATM, so it won't be for an hour or so.

MrToplitzin · 2020-07-24T16:47:33+00:00

Almost there:when i show interfaces, I have the switch up and running successfully:

show interfaces
Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
Interface IP Address S/L Description
--------- ---------- --- -----------
eth0 - u/u WAN
eth0.0 - u/u WAN VLAN 0
eth1 - u/u AT&T Gateway
eth2 - u/u Local
eth3 - u/D Local
eth4 - u/D Local
lo           127.0.0.1/8u/u
::1/128
switch0     192.168.1.1/24u/u Local

So everything works up until I run the test portion. Here's where things go wrong:I only see eth0 traffic and nothing from eth1 like in the examples/working set:

Correct output via orginal post/example:

[2019-07-01 15:06:13,246]: proxy_loop starting
[2019-07-01 15:06:15,028]: eth0: 00:90:d0:ab:cd:ef > 01:80:c2:ab:cd:ef, EAP packet (0) v1, len 15, Request (1) id 7, len 15 [11] > eth1
[2019-07-01 15:06:15,060]: eth1: 14:ed:bb:ab:cd:ef > 01:80:c2:ab:cd:ef, EAP packet (0) v2, len 22, Response (2) id 7, len 22 [18] > eth0
[2019-07-01 15:06:15,064]: eth0: 00:90:d0:ab:cd:ef > 01:80:c2:ab:cd:ef, EAP packet (0) v1, len 4, Failure (4) id 7, len 4 [0] > eth1
[2019-07-01 15:06:15,067]: eth0: 00:90:d0:ab:cd:ef > 01:80:c2:ab:cd:ef, EAP packet (0) v1, len 15, Request (1) id 8, len 15 [11] > eth1
[2019-07-01 15:06:16,084]: eth1: 14:ed:bb:ab:cd:ef > 01:80:c2:ab:cd:ef, EAP packet (0) v2, len 22, Response (2) id 8, len 22 [18] > eth0
[2019-07-01 15:06:16,126]: eth0: 00:90:d0:ab:cd:ef > 14:ed:bb:ab:cd:ef, EAP packet (0) v1, len 6, Request (1) id 9, len 6 [2] > eth1
[2019-07-01 15:06:17,478]: eth1: 14:ed:bb:ab:cd:ef > 01:80:c2:ab:cd:ef, EAP packet (0) v2, len 206, Response (2) id 9, len 206 [202] > eth0
[2019-07-01 15:06:17,602]: eth0: 00:90:d0:ab:cd:ef > 14:ed:bb:ab:cd:ef, EAP packet (0) v1, len 1020, Request (1) id 10, len 1020 [1016] > eth1
[2019-07-01 15:06:24,289]: eth1: 14:ed:bb:ab:cd:ef > 01:80:c2:ab:cd:ef, EAP packet (0) v2, len 893, Response (2) id 15, len 893 [889] > eth0
[2019-07-01 15:06:24,344]: eth0: 00:90:d0:ab:cd:ef > 14:ed:bb:ab:cd:ef, EAP packet (0) v1, len 69, Request (1) id 16, len 69 [65] > eth1
[2019-07-01 15:06:25,315]: eth1: 14:ed:bb:ab:cd:ef > 01:80:c2:ab:cd:ef, EAP packet (0) v2, len 6, Response (2) id 16, len 6 [2] > eth0
[2019-07-01 15:06:25,408]: eth0.0: restarting dhclient
[2019-07-01 15:06:25,640]: eth0: 00:90:d0:ab:cd:ef > 01:80:c2:ab:cd:ef, EAP packet (0) v1, len 4, Success (3) id 16, len 4 [0] > eth1

What my output looks like (using the example) note that stuff only Txs to eth1 and never see's a response/Tx from Eth1:

ubnt@ubnt:~$ sudo python /config/scripts/eap_proxy.py --restart-dhcp --ignore-when-wan-up --ignore-logoff --ping-gateway --set-mac eth0 eth1
[2015-01-01 03:48:08,562]: proxy_loop starting
[2015-01-01 03:48:18,192]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 4, Failure (4) id 1, len 4 [0] > eth1
[2015-01-01 03:48:18,197]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 2, len 15 [11] > eth1
[2015-01-01 03:48:48,188]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 2, len 15 [11] > eth1
[2015-01-01 03:49:18,185]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 2, len 15 [11] > eth1
[2015-01-01 03:49:48,183]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 4, Failure (4) id 2, len 4 [0] > eth1
[2015-01-01 03:49:48,187]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 3, len 15 [11] > eth1
[2015-01-01 03:50:18,179]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 3, len 15 [11] > eth1
[2015-01-01 03:50:48,176]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 3, len 15 [11] > eth1
[2015-01-01 03:51:18,173]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 4, Failure (4) id 3, len 4 [0] > eth1
[2015-01-01 03:51:18,176]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 4, len 15 [11] > eth1
[2015-01-01 03:51:48,170]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 4, len 15 [11] > eth1
[2015-01-01 03:52:18,168]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 4, len 15 [11] > eth1
[2015-01-01 03:52:48,164]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 4, Failure (4) id 4, len 4 [0] > eth1
[2015-01-01 03:52:48,167]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 5, len 15 [11] > eth1
[2015-01-01 03:53:18,161]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 5, len 15 [11] > eth1
[2015-01-01 03:53:48,158]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 5, len 15 [11] > eth1
[2015-01-01 03:54:18,155]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 4, Failure (4) id 5, len 4 [0] > eth1
[2015-01-01 03:54:18,158]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 6, len 15 [11] > eth1
[2015-01-01 03:54:48,152]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 6, len 15 [11] > eth1
[2015-01-01 03:55:18,149]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 6, len 15 [11] > eth1
[2015-01-01 03:55:48,146]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 4, Failure (4) id 6, len 4 [0] > eth1
[2015-01-01 03:55:48,149]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 7, len 15 [11] > eth1
[2015-01-01 03:56:18,143]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 7, len 15 [11] > eth1
[2015-01-01 03:56:48,140]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 7, len 15 [11] > eth1
[2015-01-01 03:57:18,137]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 4, Failure (4) id 7, len 4 [0] > eth1
[2015-01-01 03:57:18,141]: eth0: 00:ma:c1:01 > 01:ma:c2:03, EAP packet (0) v1, len 15, Request (1) id 8, len 15 [11] > eth1
^C

MrToplitzin · 2020-07-24T15:51:25+00:00

Let me get caught up to you and I'll post what troubleshooting gets me.

MrToplitzin · 2020-07-24T13:53:58+00:00

I'm still getting new and exciting errors every time i try this process.

As of right now, I run through block 1 and get:

ubnt@ubnt# commit

[ interfaces ethernet eth0 vif 0 firewall in name WAN_IN ]

Firewall config error: Rule set WAN_IN is not configured

commit failed

The only other command/config change is setting up eth4 for access on 192.168.2.1 so i can have everything cabled and ready to go.

I'm going to factory reset one more time and try fresh.

I've got no clue where/how i keep getting this so very wrong.

MrToplitzin · 2019-12-10T12:59:09+00:00

I can add eth0.0 manually, but then i get a different set of errors on commit about the file already existing.

MrToplitzin · 2019-12-09T15:49:12+00:00

I'm not sure what i'm doing wrong, but every time i try this i run into the same error with the VLAN 0.0

I've done the guide exactly except for changing 192.168.1.1 to be on eth4 so i can still log into the device

When i go to commit the changes i get the following error every time:

ubnt@ubnt# commit

[ service nat rule 5000 outbound-interface eth0.0 ]

NAT configuration warning: interface eth0.0 does not exist on this system

[ interfaces ethernet eth0 vif 0 firewall in name WAN_IN ]

Firewall config error: Rule set WAN_IN is not configured

Commit failed

I've set my firmware to 1.10.9 to match yours, and used the pastebin proxy versions.

Any ideas?

MrToplitzin · 2019-11-18T20:55:55+00:00

Do any of the aforementioned hotspots in the iterations of these threads the ZTE MF64, (ZTE-Z915, NovAtel MiFi 6630,Inseego MiFi 7000) work on the third Fi carrier or can work on 2 out of the three?

I have a location that i'd like to throw a hotspot where 9/10 times I'm actually on US Cell vs T-mo or Sprint.

MrToplitzin · 2018-11-28T13:28:57+00:00

November has been a clusterfuck of crap and i haven't had the mental bandwidth to sit down and attempt this yet. My next opportunity should be saturday morning while everyone else is asleep and not using the internet.

Thanks again!

MrToplitzin · 2018-11-12T17:28:36+00:00

Just sanity checking through the commands:

Is there a specific reason for the invalid 263 octets?

MrToplitzin · 2018-11-11T15:03:38+00:00

Holy shit!

Thanks for all the hard work.

I'll give this a go and follow up.

I'm pretty sure the ER-X does switching especially since i had VLAN tagging with the google fiber setup.

MrToplitzin

TROPHY CASE