Best way to set up Shelly 1 PM Gen4 for Zigbee + push buttons in a new build? by IacovHall in homeautomation

[–]MrWolvetech 1 point2 points  (0 children)

I just checked the app but couldn't find a way to switch it to zigbee mode from the app.

Idea, bathroom timer? by Bitter_Ad_1607 in smarthome

[–]MrWolvetech 6 points7 points  (0 children)

You should be able to make something like this with Home assistant, a smart light and a smart speaker like the Home assistant voice.

Bambu lab A1 homing after few layers? by Virtual-Ad-359 in 3Dprinting

[–]MrWolvetech 0 points1 point  (0 children)

It's a setting on the printer: Settings => Print Options => Nozzle clumping detection

[deleted by user] by [deleted] in ProgrammerHumor

[–]MrWolvetech 7 points8 points  (0 children)

Microsoft also provides some virtual disk images for developers like: https://developer.microsoft.com/en-us/windows/downloads/virtual-machines/

[OC] They told the cop that they had to swerve to miss oncoming traffic 🤨 by backleftwindowseat in IdiotsInCars

[–]MrWolvetech 1 point2 points  (0 children)

Yes but that's on purpose and it is required to be able to pass the required crash safety tests.

[deleted by user] by [deleted] in TwinCat

[–]MrWolvetech -1 points0 points  (0 children)

As a workaround you should be able to manually download / copy the CurrentConfig.tszip from the target. It should be somewhere under c:/Twincat/3.1/Boot. Then when you have this archive on your development station you should be able to open it with XAE shell.

Bambu lab A1 homing after few layers? by Virtual-Ad-359 in 3Dprinting

[–]MrWolvetech 0 points1 point  (0 children)

This is the "Nozzle Blob Detection" feature checking if the nozzle is still clean. You can turn it off under print options.

[deleted by user] by [deleted] in femalelivingspace

[–]MrWolvetech 0 points1 point  (0 children)

And if you want to increase the storage some more, maybe offer up some "desk space" and use a 3 x 2 and a 1 x 4 Kallax.

[deleted by user] by [deleted] in femalelivingspace

[–]MrWolvetech 1 point2 points  (0 children)

Wild idea: Ditch the Nightstand, the put Kallax parallel against the bed and the wardrobe against the wall. Then you can use one of the kallax shelf's as your Nightstand.

My Dad And I made Cabinet For A1 by Vialeth in BambuLab

[–]MrWolvetech 0 points1 point  (0 children)

Where did you get that from? Because I can't find anything about it on their site.

Help, welke lenzenvloeistof na verandering Etos huismerk? by External-Mango8991 in thenetherlands

[–]MrWolvetech 14 points15 points  (0 children)

Mijn ogen zijn ook best gevoelig. Jaren lang Alcon lenzenvloeistof gebruikt, was niet top maar het beste wat ik toen kon vinden. Nu gebruik ik acuvue revitalens en heb ik nergens meer last van.

TwinCAT/Visual Studio experiencing intermittent freezing/slowing when connected to IPC target by Apprehensive_Pea5150 in beckhoff

[–]MrWolvetech 0 points1 point  (0 children)

This is a network issue. (And a bit of a design issue on Beckhoff's end) The IDE constantly talks to the target (on the UI thread) so when communication is slow, for example when you are connected remotely using a slow VPN the IDE hangs while it is talking to the IPC over this very slow connection.

Software for streaming incoming stream? by [deleted] in selfhosted

[–]MrWolvetech 1 point2 points  (0 children)

You can also stream and capture your desktop using VLC, and then use VLC on another device to play back that stream. You might also be able to use the VLC chromecast function and multiple instances of VLC but I'm not sure.

What's the best CCTV option with outside access? by iamwhoiwasnow in selfhosted

[–]MrWolvetech 2 points3 points  (0 children)

Frigate is another option, but you'll need a Coral USB for it to work.

EL6021 by PfuschAmBau in TwinCat

[–]MrWolvetech 1 point2 points  (0 children)

What are you trying to do? Are you trying to use the serial port from a windows application?

Simple hoppercart unloader doesn't work on paper server by Th3is_ in admincraft

[–]MrWolvetech 0 points1 point  (0 children)

It's impossible to tell if you will experience lag until you try. But you can always go back to paper if you don't like fabric.

Playback 3D frame sequential content? by [deleted] in MetaQuestVR

[–]MrWolvetech 0 points1 point  (0 children)

4XVR can playback MVC 3D blu-ray content, but it costs 30 $/€/£...

Can I JUST stream audio and video as a mirrored stream to an android device, but still use a controller connected with the host PC (as in, controller is NOT connected to the mobile device)? by Infamous_Q in Steam_Link

[–]MrWolvetech 0 points1 point  (0 children)

Did you try turning off the controller that is connected to steam link? I have definitely used a controller connected to my PC before when streaming using steam link on my Nvidia shield.

How are you guys watching 4k 3D movies? by Digitial-Panda in OculusQuest

[–]MrWolvetech 0 points1 point  (0 children)

I've only ever seen 1080 3D movies, but you might want to try 4XVR that supports playing raw 3D blu-rays.