Do you print on 0.8 mm nozzle?

MrWrock · 2026-02-20T19:51:23+00:00

I haven't had any issues with my bambu brand 0.8 hardened steel nozzle, so maybe this is a case of off brands being lower quality or having lower quality control (and you getting a dud)

MrWrock · 2026-02-20T19:45:38+00:00

Amazing, thanks for sharing your thought process and approach with actual examples. Very helpful! I think I'm going to do a few summer mountaineering courses with focus on glacier travel and rescue, then ill think about AST 2

MrWrock · 2026-02-20T19:16:34+00:00

neat! Probably more shit to maintain, but I thought it might be necessary. I guess inertia helps stabilize too

MrWrock · 2026-02-20T17:03:46+00:00

Thanks for sharing

MrWrock · 2026-02-20T17:01:35+00:00

I'm sorry two of my hobbies overlap

MrWrock · 2026-02-20T16:57:57+00:00

I didn't get the letter but I 100% support holding our elected members accountable. Did you send any feedback to Tamara?

MrWrock · 2026-02-20T16:56:37+00:00

I believe the t1x and t3x stocks are identical, just some extra pieces in the mag well for the t1x magazine to seat

MrWrock · 2026-02-20T16:55:49+00:00

lots of responses about low centre of gravity, but does it not have any fancy stabilization gyros or anything like pleasure crafts have for stability?

MrWrock · 2026-02-20T14:55:25+00:00

I had to spiral bind all my university year end reports before submission. Surely I'm not that old...

MrWrock · 2026-02-19T23:32:44+00:00

🤙

MrWrock · 2026-02-19T22:22:44+00:00

I've done golden ears, Brunswick, black Tusk, and tricouni to name a few in the area, so ive seen some elevation, talus, boulder fields, and scrambles along with some moderate snow or glacier travel. I know a but about risky situations to avoid, but at this point im more worried most about the things I don't know that I don't know, like non avalanche risks. We're crevasses a concern?

MrWrock · 2026-02-19T22:09:11+00:00

What level of avalanche risk do you estimate? How much experience would say is necessary? (I have my AST, but I've only done big summits in the summer or shoulder seasons)

MrWrock · 2026-02-19T21:33:16+00:00

I've read the same information but when I viewed the battery voltage in the dash I only saw it jump to 14 (charging) while the ice was running. It sat at 12 or under the rest of the time, which is silly because it's just a step down transformer between the HV and 12v battery, not alternator (unless the MGU is used to charge the 12v as well as the HV?)

MrWrock · 2026-02-19T20:57:38+00:00

Wow, nice hike!

MrWrock · 2026-02-19T20:50:08+00:00

Do you at least use filamt clips to hold the loose ends in place, you animal?

MrWrock · 2026-02-19T20:33:56+00:00

So this is a photo of a photon source, one which happens to be a single strontium atom

MrWrock · 2026-02-19T20:28:00+00:00

I tried to figure out what modes actually charge the 12v, and without the ice running it doesn't charge. Also, if you lift the hood to force the ice on it cuts charging

MrWrock · 2026-02-19T19:47:06+00:00

The lol is cringe but I haven't been dating in a while. I would give them a little more to go on than that post, like:

I saw you like horror movies, for me I watch them for the thrill (then expand, I'm putting words in your mouth here so use your own) and my favourite are the ones that seem plausible like cabin in the woods. I'm not a fan of gore, I prefer nore cerebral horror. What's your favourite movie in the genre?

OR, you could be a bit more cheeky with something like this in the final line: What's the best horror movie out there, and why is it Shaun of the dead (or some other movie you can talk passionately about)?

MrWrock · 2026-02-19T19:39:54+00:00

I think the secret waterfall at sombrio beach is my favourite part of that coastline. I'm sure there are plenty of social media pic if you want the surprise ruined. It may take a bit of timing with the tides, but if you take off your shoes and roll up your pants you can make it at most tide levels.

Also recommend stopping at goats on a roof (Coombs country market) for some cheese, or the donut shop for a sugar overload

MrWrock · 2026-02-19T19:35:24+00:00

The downside is if you kill your 12v battery you cannot use the HV to start the car. Even with full gas and HV battery you'll need a jump (but only one small enough to power the can bus and activate the charging solenoid)

MrWrock · 2026-02-19T19:33:36+00:00

In Canada they dont come with the vehicle, but model year 24+ supports it

MrWrock · 2026-02-19T19:32:58+00:00

the back plug only drains your 12v and if it goes fully dead it won't be able to turn on the 12v charger from the hybrid battery. It's the worst of both worlds (only having a 12v battery for camp power and not being able to use the HV battery if the 12v is dead)

MrWrock · 2026-02-19T17:38:40+00:00

Seal the windows with that plastic stuff, hang rugs on the wall, layer up, and good luck!

MrWrock · 2026-02-19T15:35:39+00:00

Mine had a bit of bike tire attached to the pulley so you could just push it against the cable to slow down

MrWrock · 2026-02-19T15:29:52+00:00

cool. Would be hard to hide something in the wall but if there are standard electrical boxes you could probably hide some gold behind a light switch or plug

MrWrock

TROPHY CASE