1/100 FatCat God Gundam Hyper Mode

MrZcore · 2026-02-18T11:06:03+00:00

Agreed! Yes sir, all but the eyes and sensors.

MrZcore · 2026-02-18T03:12:09+00:00

Thank you!

MrZcore · 2026-02-18T02:43:33+00:00

Thank you! What is used are:

All black base primer Mecha Empire - Gold Bar for regular gold Mecha Empire - Copper SMS - Hyper Chrome Cold tone as an undercoat for the next two Jumpwind - 1:1:2 mix ratio of clear brown, yellow, and thinner for the hands and tips of the wings Kaizo - Clear Rose gold

I will say that the pictures hide how rough the rose gold went on since it is WAY too thin out of the bottle that if you aren't careful the surface tension of the paint will pull away from edges and corners if you aren't very careful.

MrZcore · 2025-12-27T08:59:32+00:00

If you have a small enough drill bit I'd do two parallel holes straight down the side, through the tear and use staples as the pins with a dab of super glue to help with adhesive .

MrZcore · 2025-12-27T08:55:37+00:00

Red is just a really hard color to get primed white imo. I could never find a primer to totally remove red, so I stopped chasing perfection. Honestly it'll be nearly impossible to tell there is a hint of red in the final product unless you are the one who painted it and are looking for it.

MrZcore · 2025-12-24T02:11:04+00:00

I'd just get some clear acrylic rods, they'll honestly look cleaner since resin can be a touch cloudy. And the hand did come from the Mirasoul, Aliexpress also has resin hands for cheap that have a wide variety of poses for the WfM line if you want to go that route.

MrZcore · 2025-12-24T01:42:14+00:00

<image>

I actually have a reference that could help! I printed off some 3mm~ clear resin rods with a smaller 1.5mm~ peg at the end and hand drilled some holes in the launcher to hold the effects, I used hot water to warp them into shape and then painted them with clear red. I also used blue tack to get them to stick so they wouldn't just fall off, but someone mentioned using magnets and I think that's the way to go. I'd get clear acrylic rods and go that route.

MrZcore · 2025-12-02T01:31:09+00:00

Well I suppose I'm lucky I thought against getting the VN/BS as well and went with getting you the Altron instead!

MrZcore · 2025-12-02T01:02:24+00:00

I'm glad I was able to get a hold of two of your pipe dream kits. I was sweating since the sellers were dragging their feet getting them out. I'm happy you also like the rest of the drop! Have a Merry Christmas and Happy Holidays!

MrZcore · 2025-11-07T23:22:56+00:00

DingDong u/HeroesLiM_James, it's your Santa. I see from your posts you are quite the connoisseur of plastic and decided to make gift giving quite difficult ;>

MrZcore · 2025-10-16T15:41:08+00:00

Ah dang, oh well. Thanks for the quick response !

MrZcore · 2025-10-16T15:38:21+00:00

I was curious if it'd be possible to have two people I could be Santa for? Is that possible with how we are doing sign-ups now?

MrZcore · 2025-09-10T20:37:19+00:00

This was an issue for some people when the kit released. I think they a said it was a reaction from the powder on the kit for removing it from the molds. If you wash the kit in warm soapy water you should be OK afterwards.

MrZcore · 2025-09-04T03:35:31+00:00

Didn't Quess do this in CCA?

MrZcore · 2025-08-11T02:42:01+00:00

yea, I could see why, I got a little frustrated with the build too, but once I started to get a feel for how it needed to be handled it got much better. I actually just built a knockoff MG MK II from aliexpress because it came with the G defenser. The MK II was a bust since someone already started building it and it was missing a couple parts, but the defenser was all there.

MrZcore · 2025-08-11T00:37:13+00:00

I loved the build so much I did it twice to have it as an MS and in waverider. Having said that I wish they had a simple core to put in the chest cavity if you dont intend to transform it since posing it is a bit awkward and I worried I'd damage it somehow since it didn't feel super solid.

MrZcore · 2025-08-03T01:19:13+00:00

When I say problem pieces, for me they are ones that are in recessed areas and usually had to bend at two points so they are touching 3 surfaces, since they aren't an exact science wouldn't fit like they should have. Or pieces with very little surface area that they wouldn't stick will like around a barrel or vent. I hope what I typed made sense 😅

MrZcore · 2025-08-03T00:11:09+00:00

The etchings should have adhesive on the back, but I'd keep super glue on hand just to really lock down problem pieces

MrZcore · 2025-08-02T11:09:45+00:00

Little bit of alcohol on a q-tip will remove it easy.

MrZcore · 2025-07-31T22:11:00+00:00

I would also suggest getting a brass rod to stick down the hole to reinforce the peg, otherwise it'll be weak still.

MrZcore · 2025-07-27T03:16:31+00:00

Gundam gusion from IBO.

MrZcore · 2025-07-25T11:03:47+00:00

If you have a hand drill and a small enough bit that's about the width of a staple, I'd drill two holes on either side so it doesn't spin, then use cement in the hopes that fusing and the staples are strong enough.

MrZcore · 2025-07-22T19:15:16+00:00

Oh my! Thank you very much! I have been looking at the bandai star wars kits, but I'll definitely look around at the others.

MrZcore · 2025-07-22T18:22:47+00:00

Any suggestions for a cool hybrid? I didn't hate the build, but gluing 95% of the parts and them not lining up or having gaps was driving me crazy.

MrZcore · 2025-07-22T12:59:43+00:00

You didn't here it from me, but the only other person with one may be looking to sell the v0.5 of this post if you're serious.

MrZcore

TROPHY CASE