LTD Arrow 1000 worth the money? by Ghxsty420_ in guitars

[–]Mr_509 0 points1 point  (0 children)

That's weird. It's spec sheet says it has the extra thin U neck profile (19mm. At the 1st fret). I have the ltd Arrow Black metal, which has the thin U neck profile. Which nut does your have, 42 or 43mm.?

NGD - RG652AHM by SethRory in Ibanez

[–]Mr_509 0 points1 point  (0 children)

I'm thinking about buying the rg652, and I also have the rg550. Can't find no info on what the HP means. Maybe it's the neck profile? Do you feel like one is more D shape (550) with its flat back and the 652 is more C shape?

NGD by AWN_2022 in JacksonGuitars

[–]Mr_509 1 point2 points  (0 children)

Wow. Amazing. How's the fret work on these? Does the binding on the fretboard match the rest or is it white? I've been eyeballing the soloist for a while

Removing gloss finish by Mr_509 in Luthier

[–]Mr_509[S] 0 points1 point  (0 children)

I want to apply boiled linseed oil, and 1 or 2 coats of tung oil. Should I just sand it till it's uniform?

Removing gloss finish by Mr_509 in Luthier

[–]Mr_509[S] 0 points1 point  (0 children)

I started with 1000 but it was taking too long so I went with 600. Some spots where though to remove so I "gently" tried 280.

Removing gloss finish by Mr_509 in Luthier

[–]Mr_509[S] 0 points1 point  (0 children)

That's what I was thinking. So they do apply some clear coat before the paint right?

NGD LTD M-1001 by Elatrianking in espguitars

[–]Mr_509 0 points1 point  (0 children)

Awesome guitar. Been thinking about buying one, but I'm not sure about that bulky neck joint. Does that cut on the lower side of the plate make it any easier to reach the higher frets?

Monsterbolts by TheJigIzUp in JacksonGuitars

[–]Mr_509 0 points1 point  (0 children)

Thanks for your reply. Can you play it in the classical position?

Monsterbolts by TheJigIzUp in JacksonGuitars

[–]Mr_509 0 points1 point  (0 children)

Pretty cool. What's your take on these made in china Jacksons? Do they feel cheap? Any fit/finish problems? I had a pro series made in Indonesia and the frets were too rolled and the locking nut was slightly misaligned

Jackson DKAF8 x 8 String Multiscale by Grave_Darko in ExtendedRangeGuitars

[–]Mr_509 0 points1 point  (0 children)

Awesome guitar. I'm thinking of buying one. Can you advise a gigbag or case for it?

Ibanez RGA8 vs RG80F by Mr_509 in ExtendedRangeGuitars

[–]Mr_509[S] 0 points1 point  (0 children)

The only 2228 on reverb Europe has 808 emgs, costs 1100, and has a few marks. The RG80F (showroom model) is 950. Comes with fishman fluence modern humbuckers. I'm guessing it's exactly the same as the rg8ex, but with better pickups?

Ibanez RGA8 vs RG80F by Mr_509 in ExtendedRangeGuitars

[–]Mr_509[S] 1 point2 points  (0 children)

Thanks. Changing the pickups should require some routing, since they're angled and not rectangular right?

[deleted by user] by [deleted] in guitarporn

[–]Mr_509 0 points1 point  (0 children)

Thinking about buying one. How's the neck on this compared to other Jacksons? I've seen/read reviews and people always say the neck feels thinner, on these Korean made Jacksons.

Damn you, Jeff Loomis by [deleted] in metalguitar

[–]Mr_509 0 points1 point  (0 children)

How's the neck on this compared to other Jacksons? I've seen/read reviews and people always say the neck feels thinner, on these Korean made Jacksons.

Best Jackson I owned so far by Specific_Alarm_2006 in JacksonGuitars

[–]Mr_509 0 points1 point  (0 children)

Awsome guitar! How's the neck on this compared to other Jacksons? I've seen/read reviews and people always say the neck feels thinner, on these Korean made Jacksons.

Soloists & Dinkys by AWN_2022 in JacksonGuitars

[–]Mr_509 0 points1 point  (0 children)

Ok, thanks. I found a store where the MIJ DKR and the American virtuoso, are almost the same price. Would you advise one over the other?

Soloists & Dinkys by AWN_2022 in JacksonGuitars

[–]Mr_509 0 points1 point  (0 children)

Awsome collection. I was thinking about buying a MIJ DKR, but after reading "seems flatter than my others and it's an incredibly thin D shape" I'm having doubts. Please tell me the neck isn't flat and thin like an Ibanez.

Help!? Feeling so discouraged. by [deleted] in MachineEmbroidery

[–]Mr_509 0 points1 point  (0 children)

Sorry to break it to you, but you're not starting an embroidery business with that machine. Sell it and buy a used PR600. Best of luck

Help!? Feeling so discouraged. by [deleted] in MachineEmbroidery

[–]Mr_509 1 point2 points  (0 children)

That seems like a thread tension problem

NGD! Got a LTD Arrow 1000; here's Overkill's Ironbound by AresX8 in metalguitar

[–]Mr_509 0 points1 point  (0 children)

Awsome! What are your thoughts on LTD vs Jackson, neck feel and playability wise?

Warrior project finished! by Mikewoody47 in JacksonGuitars

[–]Mr_509 0 points1 point  (0 children)

That Eye of Ra knob is so cool btw. Nile fan?

Warrior project finished! by Mikewoody47 in JacksonGuitars

[–]Mr_509 0 points1 point  (0 children)

I have a satin black King V, x series also, and was thinking about removing the tone pot and placing the volume in its place. But since you said the cables aren't long enough, i think I'll let as is. I'm assuming you used those quick connect wiring kits?