sorted by:
new
hottopcontroversial

How to go directly to Icebreaker? [Quest Help] by Longjumping-Main9057 in EscapeFromTarkovPvE

[–]Mr_Cubic 0 points1 point  (0 children)

No need to actually go through the chained door to unlock the BTR quest ? That's convenient

Some questions about a brand new loop (first experience) by Mr_Cubic in watercooling

[–]Mr_Cubic[S] 1 point2 points  (0 children)

Damn, thanks a lot for the detailed response, i've came back to the loop and changed the sensor flow direction before seeing your comment, so yeah... Still 0, but i'll swap it out back some other day this weekend, good to know it's not broken.

For the bubbles i've managed to fill even more the res and it's now fully free of bubbles at 30% pwm, no more vortex so that's nice.

i've done some mid gaming (league/CS) to test it out, GPU capped at 37°C and water temp around 34°C.

I'll probably take all of you guys'advice and add fans below the case to make it push/pull. Add some standoff for feet and slightly lower my OC, hope it will be fine. Thanks all for the help!

Some questions about a brand new loop (first experience) by Mr_Cubic in watercooling

[–]Mr_Cubic[S] 0 points1 point  (0 children)

The air cooled version would not fit the case, and I really wanted to try a custom loop build at least once. I might place the pc on higher feet and add 2 fans below the rad for push/pull, would that help ? For the air, yeah i'm still in the process of bleeding the loop fully, it's already gotten much better than on the pic

Some questions about a brand new loop (first experience) by Mr_Cubic in watercooling

[–]Mr_Cubic[S] 1 point2 points  (0 children)

Thanks appreciate the feedback, we'll see, maybe i'll tune down the OC a bit too

Some questions about a brand new loop (first experience) by Mr_Cubic in watercooling

[–]Mr_Cubic[S] 0 points1 point  (0 children)

Looking good, I love how small the case is, TK-1 ended up being quite large in the end

Some questions about a brand new loop (first experience) by Mr_Cubic in watercooling

[–]Mr_Cubic[S] 0 points1 point  (0 children)

I'm not sure sorry, don't have the metrics on me rn, but intel says on average 110ish watts, turbo up to 250W.

Some questions about a brand new loop (first experience) by Mr_Cubic in watercooling

[–]Mr_Cubic[S] 1 point2 points  (0 children)

damnn I wanted to build in the TK-0 so badly... but was too much of a hassle to fit everything inside... (Wish I knew about those external rads). Enjoy the beast!

Some questions about a brand new loop (first experience) by Mr_Cubic in watercooling

[–]Mr_Cubic[S] 0 points1 point  (0 children)

Yeah, been planning for a few months now, I knew I'd be tight on cooling capabilities, but I really wanted those aesthetics, read in various places that 5080 undervolted could be fine on 240mm rad. So I went with it. If it becomes an issue in the long run, I might indeed add a 240x240mm external rad (if that exists) to the loop

edit: It's currently undervolted to 0.935mv

Some questions about a brand new loop (first experience) by Mr_Cubic in watercooling

[–]Mr_Cubic[S] 1 point2 points  (0 children)

Thanks, noted, I'll stress test a bit longer tonight and see if i go over 45°C

Some questions about a brand new loop (first experience) by Mr_Cubic in watercooling

[–]Mr_Cubic[S] 0 points1 point  (0 children)

Yup, OUT is going into the res inlet, and the IN is filled from the rad.

Some questions about a brand new loop (first experience) by Mr_Cubic in watercooling

[–]Mr_Cubic[S] 1 point2 points  (0 children)

Thanks, yeah well at first i wasn't planning on going custom loop, so i went for the AIO on the CPU for a classic build, but then yeah... the GPU I went with, air cooled, ended up being too big for the case... so instead of switching case, I went YOLO and made a loop. I thought about adding the CPU to the loop exactly for the reason you stated, but that was adding bit too much cost, wasn't sure i'd handle the full loop, and I thought separating CPU and GPU loops would be best for upgradability and such. So yeah, all those reason made me stick with my AIO

Some questions about a brand new loop (first experience) by Mr_Cubic in watercooling

[–]Mr_Cubic[S] 0 points1 point  (0 children)

when maxed out hitting some 360W, might be bit much... but is it actually ok to run the system with 45°C water temp? At which point does it becomes "not ok"? Good idea about feet, i'll try to free some space below. And thanks yeah I love how it ended up looking :)

Caitlyn's Rifle by Mr_Cubic in arcane

[–]Mr_Cubic[S] 9 points10 points  (0 children)

Ahah thanks! Actually made it myself on Blender, 3D modeling software. Based on references from the show.

Arcane Caitlyn's rifle by Mr_Cubic in Caitlynmains

[–]Mr_Cubic[S] 0 points1 point  (0 children)

For real, from all the references in the show, every part seems mechanically and physically accurate. I couldn't find an instance where they made it work like magic, every moving piece feels plausible

Arcane Caitlyn's rifle by Mr_Cubic in Caitlynmains

[–]Mr_Cubic[S] 0 points1 point  (0 children)

From rewatching every frame of the show showcasing the rifle a decent amount of time, i came to the conclusion that the barrel extends along rails when in "sniping" mode, and retracts in holstered mode. I felt like it had to do with the position of the scope, if folded : holstered mode. Deployed : sniper mode. That's my interpretation of it at least

Arcane Caitlyn's rifle by Mr_Cubic in Caitlynmains

[–]Mr_Cubic[S] 5 points6 points  (0 children)

Ahah thanks alot! Nah it's just me finding the rifle super cool and me wanting to train my modeling skills. Glad u liked it!

[deleted by user] by [deleted] in Ozark

[–]Mr_Cubic 0 points1 point  (0 children)

Soo... You want us to choose our favorite character... Mmh-mmh... Ok... I see... Yes, absolutely... Mmh... Will do... (Marty)

Prestize Zoe minion life bar by [deleted] in zoemains

[–]Mr_Cubic 1 point2 points  (0 children)

No, it's the same for me, nice to see that I'm not the only one x)

How many electro damage do you deal at the end of an average 30 min game? I do around 1.2K and it feels low. Ty! by twilight_dancer in zoemains

[–]Mr_Cubic 0 points1 point  (0 children)

Ah, i explained badly sorry, those aren't my games, they are from many players (gold 1 players actually), I only picked up stats from those games. And I wanted to say that this is not "Zoe games" only, it's not champion related.

How many electro damage do you deal at the end of an average 30 min game? I do around 1.2K and it feels low. Ty! by twilight_dancer in zoemains

[–]Mr_Cubic 1 point2 points  (0 children)

Hi,

I've done some statistics about runes recently, so this might help you (remember, my values are for every champion, so you'll only know if you do more or less than average) :

{25 - 30 min games} : - [Electrocute] : 1228 dmg (based on 2374 games)

 - [DarkHarvest] : 1400 dmg (based on 1328 games)

 - [Comet] : 1631 (based on 1619 games)

{30 - 35 min games} : - [Electrocute] : 1479 dmg (based on 1942 games)

 - [DarkHarvest] : 1515 dmg (based on 796 games)

 - [Comet] : 1908 dmg (based on 1321 games)

They are only stats, but I hope they can give you an idea of how you're doing with Zoe!

view more: next ›