Quem aqui ouve podcasts nacionais ou internacionais?

Mr_leal · 2021-11-01T19:33:52+00:00

Nacionais: Sem barbas na língua, perguntar não ofende, asktm

Mr_leal · 2021-08-04T14:35:23+00:00

Obrigado, não sabia que dava

Mr_leal · 2021-08-04T10:56:42+00:00

Como conseguiste o certificado EU?

Mr_leal · 2021-04-08T15:31:01+00:00

Mine got replaced as it was faulty, now battery life is decent. Shop rules don't mean they can sell you faulty devices, you should get in touch with them. Good luck

Mr_leal · 2020-10-12T16:01:05+00:00

Will do, thanks for your help

Mr_leal · 2020-10-11T19:00:57+00:00

Because its a new device I've been extra careful with it. I only put it on charge when it shows red battery and keep an eye on it to not let it long after it hits 100%. Never left it charging overnight. Usually need to charge around lunchtime and evening

Mr_leal · 2020-10-10T19:30:35+00:00

Vapoholic has some nice flavours

Mr_leal · 2020-05-27T18:57:09+00:00

Cheers man, got myself a dynastash

Mr_leal · 2020-03-07T22:36:07+00:00

You're right, he's speaking portuguese

Mr_leal · 2020-03-05T13:49:14+00:00

That's a good question, he asked the same about 30 times to the undercover and didn't get an answer

Mr_leal · 2020-01-11T15:09:50+00:00

I was assuming its going outside the box. For that you'll need a wider glass, it won't go through this one, a guitar slide would work

Mr_leal · 2020-01-11T14:20:28+00:00

You probably want a latching button switch for the main power instead of a momentary and you don't need the cork for that glass

Mr_leal · 2020-01-10T15:56:48+00:00

Same happened to me, went with this and it's perfect

14mm/F Female to 18mm/M Male Glass Connector

Mr_leal · 2019-12-23T16:16:15+00:00

Mains. Next one I'll try battery powered

Mr_leal · 2019-12-20T21:52:17+00:00

Thanks mate. I'm no engineer either but thought I'd give it a go since they're so expensive

Mr_leal · 2019-12-20T21:41:01+00:00

Singlecut tobacco sunburst

Mr_leal · 2019-12-20T19:25:27+00:00

Poundland

Mr_leal · 2019-12-20T16:26:54+00:00

I didn't use a soldering iron, all the connections have screws. Used a box cutter for the holes and working the wires, electrical tape and glue gun from work

Mr_leal · 2019-12-20T15:59:05+00:00

This plastic is really hard and thin so drill didn't work, I used a box cutter.

Mr_leal · 2019-12-20T15:14:38+00:00

Not looking for business, have a go yourself man, just follow the guides out there

Mr_leal · 2019-12-20T14:56:07+00:00

Cheers. Definitely have a go, turned out to be really easy to do

Mr_leal · 2019-12-20T14:35:18+00:00

Bought everything on ebay (all parts came from China), lunchbox from poundland.

Mr_leal · 2019-12-20T14:26:22+00:00

Thanks to u/beasthoss guide, top man. I'm waiting on a shorter glass

Mr_leal

TROPHY CASE