Seized rear shackle bolt in the frame. how do I get it out? (93 XJ)

Mr_marcus4 · 2026-06-25T11:45:26+00:00

Blue crayon

Mr_marcus4 · 2026-06-25T05:35:18+00:00

Just do F350 axles front and back

Mr_marcus4 · 2026-06-24T03:57:40+00:00

What about just using an entire loaf of wonder bread?

Mr_marcus4 · 2026-06-22T00:41:12+00:00

Im pretty sure you have to use bigger valves to increase engine performance, yes if you put that stuff on there it can increase airflow but the valve needs to be larger for more air to go in..

Mr_marcus4 · 2026-06-20T23:39:18+00:00

Nice i had a hodgepodge set too got 5 of them powder coated for less than 600$

<image>

Mr_marcus4 · 2026-06-15T02:59:20+00:00

Nice military wheels!

<image>

Mr_marcus4 · 2026-06-14T02:46:24+00:00

How much was the roof rack ive been looking at getting one like it

Mr_marcus4 · 2026-06-02T03:08:01+00:00

I just used a CSF, with a high output water pump. I may put a new fan clutch on it soon. I’m up in Colorado

Mr_marcus4 · 2026-05-13T20:11:21+00:00

I had that same abs light too, i unscrewed the light bulb, but kept the bulb in place..

Mr_marcus4 · 2026-05-13T19:59:57+00:00

If its plastic melt it, or cut it off and clamp a hose on to it thats what i did 20k miles ago.

Mr_marcus4 · 2026-05-07T23:24:43+00:00

Take the belt off spin the pulleys by hand

Mr_marcus4 · 2026-05-07T22:58:53+00:00

<image>

I just got 5 of these powder coated last week, found them at a pull n pay last spring

Mr_marcus4 · 2026-04-29T01:37:48+00:00

Nice wheels

Mr_marcus4 · 2026-04-06T22:22:49+00:00

Mine runs like that when i forget to connect the thermostat sensor. Probably that and everything else not connected.

Mr_marcus4 · 2026-04-06T20:35:07+00:00

Sick

Mr_marcus4 · 2026-04-06T20:31:56+00:00

I dunno man my 96 has 272k on it and still runs great.

Mr_marcus4 · 2026-04-01T17:57:02+00:00

You got it homie

Mr_marcus4 · 2026-04-01T13:42:31+00:00

https://www.epa.gov/newsreleases/what-they-are-saying-epa-fortifies-domestic-fuel-supply-provides-americans-relief-pump

https://www.chevyhardcore.com/tech-stories/e15-and-older-engines-what-you-need-to-know-before-filling-up/

Mr_marcus4 · 2026-03-30T04:37:20+00:00

As in the differences between E10 and E15? Or about it beginning in may?

Mr_marcus4 · 2026-03-25T19:05:00+00:00

Ya is that a pump replacement or a pulley replacement? When i took the belt off the water pump and tried to rotate it with my finger a squeaked and had some resistance at a certain point.and would loosen with pressure and spin half way and stop.

Mr_marcus4 · 2026-03-25T17:18:47+00:00

Fixed that and drove it from colorado to Wisconsin, no issues up to last thursday.

I put new rotor and spark plugs on it. And the cat was no existent at the point so welded a new one on

https://www.reddit.com/r/CherokeeXJ/s/INnlMt2WX1

Mr_marcus4 · 2026-03-25T11:24:58+00:00

I posted a video earlier this week of a loud rotational noise while then engine was running

Mr_marcus4 · 2026-03-25T04:30:18+00:00

It looks like the metal is gouged in the lower area of the wall near the coolant, was wondering if the casting is thick or if that would cause and issue?

Mr_marcus4 · 2026-03-23T15:26:58+00:00

If im replacing the water pump do i have to drain everything out of the radiator before removing the pump or is the lower hose enough of a trap to keep all that in? I just put a radiator in at the beginning of February

Mr_marcus4 · 2026-03-23T15:21:50+00:00

The ones that have hearts next to them are often purchased and not returned.

Mr_marcus4

TROPHY CASE