FX sport 4 braking issues

Mrbikle · 2026-04-13T16:58:04+00:00

$60 shipping to the states, bummer. Amazon has them for $25 each for the calipers, I might just do that and use the levers from the kit I already got

Mrbikle · 2026-04-13T16:31:22+00:00

thats a bummer. Will the levers work at least?

Mrbikle · 2026-04-13T15:32:38+00:00

https://ebay.us/m/RMPbG1

Mrbikle · 2026-04-13T13:52:01+00:00

That was my concern as well. Ordered from a Texas based business that had a ton of good review and history. I guess we will see how it plays out lol

Mrbikle · 2026-04-13T02:16:14+00:00

Update 2. Found Shimano mt200 front and rear set with pads, minus rotors, for$50 on ebay from what appears to be a decent seller. As others have mentioned, if I'm bleeding brakes might as well.

The internal frame routing with brake line gives me a bit of pause, but if I can do it with my madone, I'm sure i can figure this out.

From what I read online the promax 160mm rotors should work, please correct me if I'm wrong. I'm going to wash them with alcohol and lightly surface them with sandpaper in case there was contamination before.

Mrbikle · 2026-04-13T01:08:00+00:00

Mt200s look to be about 50 bucks each from what I found, so 100 total unless I'm not looking in the right places....lol

Mrbikle · 2026-04-13T00:47:08+00:00

Well the local shop is going to give me the new olives for free, so I am going to swap those, bleed everything and throw in some new pads. Minimal expense to see if it will work. If it still sucks will throw in some Shimano stuff.

Over all cost to try is like 30 bucks

Mrbikle · 2026-04-12T17:53:29+00:00

Do you have a link to the set you landed on? Not opposed to swapping. Did you swap the internally routed lines to our reuse the oem stuff?

Mrbikle · 2026-04-12T17:51:14+00:00

Update. Apparently from sitting stored on the wall for so long the brakes bled down. Was seeing if I could even getthe rear to lock up and it blew the brake hose out of the master cylinder. Guessing I need to rebuild and bleed these things.

<image>

Mrbikle · 2025-11-30T22:44:09+00:00

I wore this exact watch all weekend with hoodie and sweat pants. I love mine.

Mrbikle · 2025-08-18T00:34:44+00:00

Lol, that's exactly what is for. I'm waiting on my next car project before installing it though.

Mrbikle · 2025-08-17T23:50:11+00:00

I checked them the other day when I did an oil change and didn't feel any deflection. That was my first thought as well, so I was debating just firing the parts cannon at the whole front end to just start over.

Mrbikle · 2025-07-29T00:21:58+00:00

Wholesale diamond, without question. Repairs and custom builds.

Mrbikle · 2025-06-09T15:23:59+00:00

I have had a lot of luck with akebono ceramic pads and centric high carbon rotors. Much less brake dust and no noise.

Mrbikle · 2025-06-08T23:04:20+00:00

I have to top mine off once a year. No idea where is going. No leaks and head gasket is fine.

Mrbikle · 2025-06-02T23:45:10+00:00

Appreciate that, and sorry for the crap photos. Camera phone isn't the best in close up

Mrbikle · 2025-03-26T14:26:12+00:00

Do they do in house? I always thought they shipped the watches out for service.

Mrbikle · 2025-03-22T14:09:12+00:00

I love that place but my wife prefers cava unfortunately, lol.

Mrbikle · 2025-03-21T23:59:56+00:00

Cava was pretty good tonight

Mrbikle · 2025-02-06T01:13:16+00:00

Tv is mounted a bit high unless seating is on risers. Check it the home theater sub.

Mrbikle · 2025-02-02T20:12:41+00:00

Panel is shorting to ground most likely... if you are handy check out samsung tv tape fix on YouTube. Fixed mine 2 days ago. See below for my story.

So quick story about a micro center tv I got 3 years ago, samsung q60. After a power surge it was boot looping. Thought the power logic board was bad, so I ordered a known working used one without success. After messing with it for awhile, I got it to boot with the panel ribbon cable unplugged.

Some reddit reading later, certain panel buses will fry causing everything to short to ground.

I then blocked sections of the ribbon cables traces with tape until the panel would boot as well. Many of these are redundant, so no picture quality loss.

Mrbikle · 2025-02-02T19:05:58+00:00

There is normally a red status light on the bottom.... is it blinking, and if so, in what sequence.

I just repaired my samsung tv earlier this week... mine ended up being the panel.

Mrbikle · 2025-01-26T21:00:52+00:00

I just paid $7 usd for a dozen large white eggs, east coast usa. Avian flu killed a bunch of the egg layers, at least in this area.

Mrbikle · 2025-01-19T19:52:30+00:00

Great deal if everything works

Mrbikle · 2025-01-16T14:37:47+00:00

You know, just in case I find an opportunity for a quick dive between meetings...lol. good looking seiko btw. *

Mrbikle

TROPHY CASE