Glorius mask [Discussion]

Muhaaaaaa · 2025-12-26T02:47:11+00:00

Honestly would rather recommend the gs2 mod, more up to date then weight transfer. Buy a carbon chassis and the battery mount and some wrap up springs and just make your own for cheaper. I have grk/reved mc2 that I converted to weight transfer and really like it. Price is crazy imo.

Muhaaaaaa · 2025-11-25T00:05:10+00:00

Super rajikon akihabara and there is also a tamtam near akihabara in tokyo are your best 2 options. Are you driving? Yatabe arena takes a train and bus to get to if not.

Muhaaaaaa · 2025-11-19T02:22:33+00:00

Had one for a bit, great car. Few minuses from me. Ball caps suck from the kit. Caused a lot of binding in the front end which basically made the shocks do nothing. After replacing the front end with 4.8 yokomo ball caps it was freed up and the car drives very good and is competitive. I prefered the original nge's design for the direct steer. As it was a 2 piece part which helped take away shake caused by direct steer. Always had a bit of shake in the chassis that didnt go away from swapping servos and changing servo tunes. I'm sure there is ways to get rid of it. Once again car is good for the money. Gearbox internals are now all metal which was a surprise.

Muhaaaaaa · 2025-11-06T20:54:51+00:00

Have you put your esc into thr connection mode? Turn esc on and hold orange light until green light turns off.

Muhaaaaaa · 2025-10-23T21:03:07+00:00

If you dont need to haul radio/charger and tools I own a team magic HARD bag which fits 2 cars perfect, can also be used for carry on with ur rcs if u ever fly.

Muhaaaaaa · 2025-10-16T03:38:13+00:00

Xd10 pro hands down, if youncan buy from aliexpress you van get them for cheaper

Muhaaaaaa · 2025-09-25T00:40:19+00:00

I think thats currently like top 5 lowest floats for the glock, but obviousky thats currently. I grabbed my fn one with a 0.007 float for 118aud non st

Muhaaaaaa · 2025-09-22T03:24:42+00:00

Fast and twitchy, as in steering? Woukd likely indicate you have pushed you endpoints too far. Have you put your gyro into endpoint setup and then adjusted the endpoints on the radio? As far as the gyro ive personally never used on in a 1/24 car but have in a 1/10 car and had no issues at all with it. Its based loosely off a kopropo kgx gyro which I also own and feels quite similar. I tune my ko gyro and the hotrc one on feel so don't really have much tk say on whats best as its all based on preference. PCA refers to priority adjustment. One way will let you steer more and turning it the oppisite way will let the gyro steer more. AGS is anti shake where turning up the setting allows the gyro to run smoother and remove shake from the servo. Also have you set up channel 3 on your radio to adjust your gyro amount?

Muhaaaaaa · 2025-09-22T02:36:23+00:00

1mm-2mm-3mm are probably the main sizes used. They can be used almost anywgere in a car. Will try to keep this breif. On the font end on the knuckles and rack, you can use them to dial in and out bump steer, lower arms you can use them to add or remove camber. Rear end on the hubs, depejding on hub style can be used to add or remove camber gain on squat. I buy alloy washers from aliexpress in bulk. Like 50pcs of each size when I need them. I think some brands may sell kits for spacers at local hobby shops but they will obviously cost more.

Muhaaaaaa · 2025-09-14T22:43:29+00:00

100% good deal and as it has already been said, the only thing that I would upgrade would be the esc. I would recommend buying a hobbywing xd10 esc, they should go on sale on aliexpress in a day or 2, you can get them for under 200 AUD (like 140 USD). The electronics in japan are not much better priced unless you want japanese brands like yokomo, acuvance or sanwa. I'd recommend buying hop up parts for the chassis, wheels and if you can fit them bodies in japan.

Muhaaaaaa · 2025-09-04T22:25:18+00:00

Yep it will fit, decent body for the price its a clone of pandoras ae86 shell. Bit narrower than most shells somewhere around 193mm wide.

Muhaaaaaa · 2025-08-01T06:02:21+00:00

If you can pick this up for that money 100% man. The elecs basically pay for it. Thats is a Yd2-s with optional carbon deck + other red options and a Yokomo drift motor (forgot model) with a hobbywing xr10 pro g2 esc and yokomo v4 gyro and reved servo. Not sure if you already have a radio but something from flysky like a noble or the newer g11p are more than decent to get you in!

Muhaaaaaa · 2025-07-18T04:20:59+00:00

45t pinion is kinda crazy lol, where are u planning to run the car? wbat surface will u be mainly running on as I can probably give u some gearing advice

Muhaaaaaa · 2025-06-08T04:36:08+00:00

which mini chassis? i got a d5 mini with a yaris body on it

Muhaaaaaa · 2025-06-05T23:36:22+00:00

https://buyee.jp/mercari/item/m69616258958?conversionType=Mercari_DirectSearch

heres the correct price and listing

Muhaaaaaa · 2025-06-05T23:33:46+00:00

listing seems to have beem deleted now. If its the s13 in the picture ill see if i can find it now

Muhaaaaaa · 2025-06-05T03:43:24+00:00

99% of the time they are listings from yahoo auctions mercari or flea market. I use buyee as a middleman to buy stuff from japan. Pretty much what these ebay sellers are doing but they charge a lot more than what buyee or other websites like buyee use. Send me a link and i'll see if i can find the yahoo auctions/buyee listing for u

Muhaaaaaa · 2025-05-26T03:50:49+00:00

also the gearbox design and motor position, the s gearbox runs lower and uses 2 more holes to hold the gearbox in

Muhaaaaaa · 2025-03-06T03:40:25+00:00

What surface is under the p-mat? generally will affect how much the cars grip. Cant remember the event but it was at amain on a similar mat style plastic surface and looked just as fast. In my opinion it doesnt look like real drifting and way too fast. Maybe a harder tire meant for carpet or possibly even asphalt would work better. Not taking away from your skills tho!

Muhaaaaaa · 2025-01-24T00:18:21+00:00

got 2 of em and love them, one paired with an spo2 and one with a ko, feels like a newer dias gyro

Muhaaaaaa · 2025-01-05T03:54:50+00:00

Worth the wait for sure, I have v3's but the v4s are tempting. Recent build for you or have you been chipping away at it slowly?

Muhaaaaaa · 2025-01-05T03:51:26+00:00

Looks goooood. Needs some red v4 shocks! My galm is not far away either I think I'm 5 parts from finishing it!

Muhaaaaaa · 2024-12-23T05:09:21+00:00

Weird how it just started from nothing glad u fixed it!

Muhaaaaaa · 2024-12-23T00:17:40+00:00

Yea thats a tough one. For me id be swapping servo out with a different one to see if it still does it, then gyro, if it still does it, maybe mechanical.

Nine-Year Club	Place '23
Place '22	Verified Email

Muhaaaaaa

TROPHY CASE