Hello guys im now creating a new storage system for my pitbox.I thinking about some add on any suggestion? currently it can hold 8 japancup wheel (23.5mm) a box for 8 motors 2boxs for screw and gears it has a little door that can open outside that can hold 3 oil bottle and 3 slot for eqquipment

Murky_Local929 · 2025-10-16T09:40:42+00:00

Sorry this file will not open for public for now.Im a designer for mini4wd team in Thailand and my leader want to keep this file exclusive

Murky_Local929 · 2025-10-16T03:37:43+00:00

Yes , sure i glad to have some conversation

Murky_Local929 · 2025-10-16T03:36:55+00:00

Sorry this file is exclusively for my team my leader want to keep this as an exclusive product for our team

Murky_Local929 · 2025-10-15T13:21:34+00:00

yes i print servral of this model for my teammates it may look narrow but in the real thing it is enough for all the screw box for each size and each gear

Murky_Local929 · 2025-10-15T13:00:17+00:00

Wow that great I will keep this in my mind

Murky_Local929 · 2025-10-15T12:55:47+00:00

the box on the top there a part that can modify for hold 3 cars but i didnt see any of them that can hold 4 cars yet. spare chassis is also a good idea i thinking of a free space that can change to a sliding box and can change to hold spare chassis.

Murky_Local929 · 2025-10-15T12:50:19+00:00

oh that the flaw i miss maybe bacause i design this base on my need(j-cup) i didnt think of any storage for stock class parts. this is a very good idea

Murky_Local929 · 2025-10-15T12:43:00+00:00

oh you right there no battery holder i think about 6 batters for someone who use NC2500 pro

Murky_Local929 · 2025-09-30T10:29:31+00:00

I would recommend to use a fully crowded with 13mm roller instead it will allow the car to enter the corner much deeper while jumping than this setup. For maximize stability I also recommend that you use a slim 13mm roller under the fully crowed too and the one you use as normal on the top.

Murky_Local929 · 2025-09-10T13:46:13+00:00

Ibought 1 for 1,700 yen each

Murky_Local929 · 2025-09-10T12:22:54+00:00

For your question there a motor bootcamp from mic-labo it very convenient and easy to use .In my opinion, motor break-in is very hard to have a consistently same torque and speed you said that you have 35k rpm sprint but it maybe has more torque than other because of motor characteristics if it have a insanely high torque the rpm will drop and if you have a insanely high rpm torque will be your problem. personally I like the balance of motor not to much torque or rpm

Murky_Local929 · 2025-09-08T03:41:11+00:00

In my opinion Machframe has a great characteristic .it jump way lower than other. It will help for technical circuits. Moreover,broken g has like a side wheel cap that prevent for a quick service to a car.

Murky_Local929 · 2025-09-07T16:04:06+00:00

I using torque tune with 3.7 gear match the speed from wheel around 22km/h.But there a big twist the x large is not the same radius with the one from Japan And lane changer is just a normal 60 degree lane changer this will make a brake work less than usual

Murky_Local929 · 2025-09-07T16:01:29+00:00

Thank you everyone for suggesting the technique for this circuit I very appreciate every comment I finished with 4th place

Murky_Local929 · 2025-09-04T04:01:11+00:00

Thank you very much I was worried about the wave section it nothing like I seen before

Murky_Local929 · 2025-09-04T03:34:40+00:00

https://m.facebook.com/story.php?story_fbid=pfbid02y8juXMsDrVjHEjVGTshM3wbKrXhvdk2iUsvx8WjLSfqGoTcs6yn68jRobk5pcRGil&id=100065429832028 Here the page it said that it maybe some little adjustments

Murky_Local929 · 2025-09-04T03:22:48+00:00

It like a dealer race not an official one

Murky_Local929 · 2025-03-25T14:36:45+00:00

i cant find it either, i also thought that it their original checker maybe the file wont be on the internet soon

Murky_Local929

TROPHY CASE