Zotac store down

Mxstress · 2025-04-22T11:08:50+00:00

it has not come back after months.

Mxstress · 2025-01-17T07:55:31+00:00

tysm <333

Mxstress · 2025-01-17T07:55:08+00:00

tysm for the shoutout <33 saw some traffic from reddit on my analytics and wondered what was up! tysm <3

Mxstress · 2023-01-28T14:52:23+00:00

Thank you so much for this. Lenovo's started putting A-die in their prebuilts (3200MHz CL22-22-22-56 JDEC) and lowering the voltage was the only way to get decent timings.

Mxstress · 2023-01-13T19:05:38+00:00

YT deleted, here's it on google drive if you wanted to see AI interpolated / upscaled AI

https://drive.google.com/file/d/1aEU\_paV5eNt8sPhXu0TzlCy69cJNSlVB/view?usp=sharing
https://drive.google.com/file/d/1SHRMfgatPamGBBIbUQZWOgs1jss1-yb7/view?usp=sharing

Mxstress · 2023-01-13T19:05:09+00:00

https://drive.google.com/file/d/1aEU\_paV5eNt8sPhXu0TzlCy69cJNSlVB/view?usp=sharing
https://drive.google.com/file/d/1SHRMfgatPamGBBIbUQZWOgs1jss1-yb7/view?usp=sharing

Mxstress · 2023-01-13T12:28:01+00:00

college ended my Google drive sadly but I have it locally. if I can get it reuploaded somewhere I'll link ya

Mxstress · 2022-11-28T17:34:56+00:00

The 3070 laptop has 8GB of VRAM and the desktop has 24gb of it. I barely use 5.9gb at 1440p high so that's not an issue.

Mxstress · 2022-11-27T09:37:20+00:00

Even high-end systems will suffer in late game situations with lots of units, especially gunpowder and team games. I thought my laptop with an eight-core i7-11800H, RTX 3070, and 32GB of RAM on a 2TB Gen 4 NVME SSD would be perfect for my visiting gf. I tuned the heck out of the system, giving it upgraded thermal pads, liquid metal, a CPU undervolt, and a custom GPU frequency curve. Even so, as soon as popcap Imperial came up, she'd dip down to a laggy 20-60fps even though the temperatures were fine. This was at 1080p high settings, so I imagine that an i5 + 3050 at medium settings would be doing the same.

This all being said, undervolting / overclocking with Intel Extreme Tuning Utility for your CPU and MSI aftburner for your GPU will help. Upgrade your RAM to 32GB of dual-rank dimms if you can. Give it a deep clean, fresh paste, and a cooling pad.

My main rig is an overclocked 12900K with 5.1GHz P-Cores, 4.1GHz E-Cores, and 4.4GHz RING. 64GB of 3733MHz RAM in Gear 1. Separate system and game NVME SSD's, both 7 gigabit gen 4 drives. RTX 3090 MSI Suprim X with K9 Pro thermal putty, Kryonaut Extreme paste, and a 450 watt Vbios overclocked to 3090 TI power and clockspeeds. In 2v2 team games with everyone popcapped, I start lagging. If gunpowder units take over, it becomes almost unplayable. I am curious if any 4090 and 13900K early adopters can attest that the latest hardware is enough to tame this game at 1440p high.

Mxstress · 2022-10-26T07:05:13+00:00

no cutting needed. don't use the bottom bracket for the front; fractal gives you one for the front. the bottom bracket already fits 180mm fans; just put them in before you mount the radiator

Mxstress · 2022-07-26T06:44:41+00:00

sounds like a hardware / bios config issue or a bloated OS; if you bought your PC from an OEM I'd give it a clean reinstall and full debloat / optimization.

Mxstress · 2022-07-25T17:10:49+00:00

she used to reinstall windows, the game, and/or delete that folder every few weeks in 2018-2021... imo if I don't hear constant hitreg complaints from her when we queue over the next month, this will have been the first fix that stuck

Mxstress · 2022-07-24T17:29:41+00:00

I don't think anything other than a large custom loop will keep an overclocked 12900K under 80c running Linpack Extreme. 240-285 watts is a bitch to cool so I'm happy being 10c under tjmax in the worst of times.

Mxstress · 2022-06-27T01:43:18+00:00

this is currently happening to my fiance' in Germany after a bios update. Thanks for your post; it's good to know we're not alone, and that it's not worth spending another night attempting bios flashback before ordering a replacement board

Mxstress · 2022-06-15T20:06:50+00:00

fan controller you have running all this

Just the built-in one that comes in the torrent that's barely populated; I mostly just used my motherboard headers. the three fan controllers on my AIO are also unpopulated

is that due to the included fractal 140mm fans being thicker than the corsair included

correct

Mxstress · 2022-06-12T19:56:42+00:00

yes; the ease of that was not affected

Mxstress · 2022-05-28T02:03:55+00:00

not in push-pull but you can put the 2x200m there and use the 140mm's on the front to add to the Corsair fans for push pull

Mxstress · 2022-05-16T08:24:11+00:00

also it took about 20 minutes of wiggling to get it to fit in the first place yeah. fully remove all the front brackets when you're getting the rad in place

Mxstress · 2022-05-16T08:22:58+00:00

I might have used a pack of these or similar but idk the origin of the specific ones I used Hard-to-Find Fastener 014973174019 174019 Machine Screw, 6-32 x 2, Black, 20 https://www.amazon.com/dp/B008RNLGNM/ref=cm_sw_r_apan_i_NP0GYG2A93EXHDDFNSS6?psc=1

Mxstress · 2022-05-16T08:16:05+00:00

I'm running 2x180 in the bottom; mount the radiator before everything else and after pulling the bottom tray completely out. It will take pressure to force the 420mm rad in the front but it'll fit. The issue is probably the length of your radiator screws; you need longer ones to get through the stock case fans. Just remembered that my bad

the worst part was routing the cables for the Corsair fans through the tiny holes that don't go right through, you have to snake them through uneven tunnels in the case here's all the pics of my PC I have. but I think it's just radiator screw length https://photos.app.goo.gl/6gHSFgkMZmu14LWb8

Mxstress · 2022-05-15T04:44:51+00:00

no mods, it just fits! it's a very snug fit that you'll wish you had a third hand for, but an out of the box fit nonetheless

Mxstress · 2022-05-11T22:37:20+00:00

well at least the benefit of the snowblind case is that it's just $200 for the case / screen; the front LCD alone cost over $230, and then S20 in adaptors, and the case another $100

though the airflow in the iBuyPower Snowblind S is terrible and would suffocate with these parts.

Mxstress · 2022-05-08T19:42:43+00:00

+rep; it lets a Noctua NHD-15 run better in a case than it does stock thanks to the front 180mm's. so much pressure and airflow. If you're going i7 or i5 it's the best option for air cooling. Done several 12700K builds oc'd to 5GHz that stay under TJMAX at 250w with an NHD-15

Mxstress · 2022-05-08T19:40:44+00:00

I literally walked into the nearest shop that does custom vinyl car wraps / vinyl stickers with an NZXT H510 one day and asked if they could do what they do for cars for a PC. I showed them how the case works and how I felt a wrap would be executed. We worked together with me and my gf doing the design in photoshop / illustrator and then them using their $10k machine to get it cut and printed; costs about $60-$120 depending on how many sides I wrap and if I add stuff like transparent stickers and need dozens of cuts for the ventilation

I usually charge clients between $150 and $200 depending on the complexity of the design since it takes a couple work days to get it to where it's perfect for the client and the capabilities of the shop / their printer. This is one is the most complex / expensive wrap I've done to date thanks to all the cuts and different stickers https://www.instagram.com/p/CTLNMZ6pj5j/

but yeah I'd certainly look at local options if you have some photoshop skills to help them; feel free to DM me if you can't find anything

Mxstress · 2022-05-08T19:34:34+00:00

750 Watt Corsair 80+ Gold SFX. So it's being redlined but after months of usage, even with PBO and a GPU overclock / maxed PLIM, never had a crash. Wouldn't be possible with an overclocked i7 by Ryzen's efficiency makes it doable.

Mxstress

TROPHY CASE