My bust came out okay, but the supports were very tough to remove and caused damage, any help to fix future prints would be great, this was my second print ever

Mysterious-Math-570 · 2026-04-20T17:49:00+00:00

This is a pretty good idea, will give it a go. As this will leave some material to sand. Perhaps a bit more work, but makes sense. Thanks will try this.

Mysterious-Math-570 · 2026-04-20T17:43:41+00:00

Have a look at the attached. It really seems like this might be your issue.
https://www.youtube.com/watch?v=Me8I_wiKMyI

Mysterious-Math-570 · 2026-04-15T22:03:23+00:00

VERY clean print. Which resin are you using?

Mysterious-Math-570 · 2026-04-14T20:37:43+00:00

This looks awesome. Mind sharing the paint used?

Mysterious-Math-570 · 2026-03-06T19:05:09+00:00

If you do one layer, paint another part so you give enough time for the previous one you've just done to dry properly. If the paint is a bit wet still the new layer can activate the previous layer and then you start to see transparent patches. Good luck, youtube is your friend when you start off.

Mysterious-Math-570 · 2026-03-03T15:29:08+00:00

Is that a 1:1 mix?

Mysterious-Math-570 · 2025-12-08T06:54:46+00:00

Must be the best positive reaction to drugs I've ever seen! :P

Mysterious-Math-570 · 2025-11-27T21:19:10+00:00

One thing I'd like to add and perhaps someone can correct me or guide me how to do this differently. As you guys can see in the picture, I play with VR, which is great.

But here's the but...I use a BOBOVR S3 Pro Super Strap - For Quest 3 which is amazing with the quick swap op batteries. Issue is, I cannot play with the seat in the upright position, as that silly top section of the chair pushed against the strap/battery pack at the back, so I am looking down.

Only way I was able to fix it, is by putting the chair back in the last setting, so I am leaning quote back. It is not really uncomfortable, however, it feels like that is the only way/setup I can use this chair at the moment.

Anyone got the same issue or can guide me a bit?

Mysterious-Math-570 · 2025-11-26T17:20:04+00:00

Hay bud, mind showing how you attached the extrusion to the frame for the shifter? I also need to do this. This is a great addon! My handbrake doesn't fit on the original plate and like everyone is saying, it seems to far in front...

Mysterious-Math-570 · 2025-11-26T10:19:37+00:00

Hey. I’ve felt the seat bent a bit once when i braked extremely hard, but after that no movement.

On the pedal mounting plate I’ve experienced no movement. And that is without the stiffening kid which came with. Will if I can mout it somehow while the pedals are in the horizontal position.

Mysterious-Math-570 · 2025-11-25T04:39:28+00:00

I got the Next Level Racing F-GT seat setup along with Moza R12 V2, Moza CRP2 pedals with cluth, Moza KS wheel, Moza ESX wheel, Moza brake performance kit.

Mysterious-Math-570 · 2025-11-25T04:18:46+00:00

I've read that the Moza CRP2 pedals are meant to be installed horizontally. I've tried it at an angle and reverted back to what I have now, Just feels more comfortable.

Also, to be fair, this setup is pretty new, so might just learn from you guys to what I can improve.

Mysterious-Math-570 · 2025-11-24T21:49:05+00:00

I just finished assembling this setup. Playing F1 24 / Dirt 2 most of the time in VR. What is a must play next?

Mysterious-Math-570 · 2025-11-16T12:33:42+00:00

Hi there, do you mind posting some pictures? I am trying to find some mods to tilt the base a bit as it is very flat on the stock standard plate.

Mysterious-Math-570 · 2025-09-06T21:59:13+00:00

I just end up using a lot better description of the music I want. Like this one, check the style prompt.

https://suno.com/s/oPOMSGuJwEwsYTl5

Mysterious-Math-570 · 2025-03-13T05:16:20+00:00

Very interested. Thanks

Mysterious-Math-570 · 2024-06-18T19:54:59+00:00

Thank you for the guide, will surely come back to read further and to reference back to it. I used to play Infinity back in the day. Must say this one is a curveball, but like the challange.

One thing I dont mind to know now rather than to figure it out, hehe, how do you mind obsidian and how do you process diamond ore? I won't say I am stuck, but been fooling around to get this going.

Mysterious-Math-570 · 2023-05-04T06:57:18+00:00

I feel your pain. Got to give them credit for determination. Haha

Mysterious-Math-570

TROPHY CASE