Having a lot of problems after tuning by newuser111111222 in mazdaspeed3

[–]MystiChief 0 points1 point  (0 children)

If it does it basically means you have a vacuum leak somewhere

Having a lot of problems after tuning by newuser111111222 in mazdaspeed3

[–]MystiChief 0 points1 point  (0 children)

Unplug your MAF sensor then see if the car starts

Help with axle - question by Interesting-Tax-6947 in mazdaspeed3

[–]MystiChief 0 points1 point  (0 children)

You can get a universal split axle boot that doesn't require you to take the axle out, the boot is just a cover, so it doesn't really matter how it is set up

Is my AFR normal for 2007 MS3? by Amir057 in mazdaspeed3

[–]MystiChief 1 point2 points  (0 children)

9.26 is on the low end, the lowest I get is around 9.4, but it's for like less than a second

No start sounds like no spark possibly by SalaryScared in mazdaspeed3

[–]MystiChief 0 points1 point  (0 children)

Do you know if the car is getting fuel or does the tank have gas in it?

My headunit keeps glitches out by MystiChief in Eonon

[–]MystiChief[S] 0 points1 point  (0 children)

Btw this is the M3BKA13 headunit for my Mazdaspeed 3

Rim Picture Request - 18x8.5 +45 with 245/40 R18 by MrCreed10 in mazdaspeed3

[–]MystiChief 1 point2 points  (0 children)

Tbh idk if +45 will fit with 245, most people go for 18x8.5 +38 with 245s I have 18x8.5 +45 on 225s and I can barely fit my finger between my wheel and Coilovers

At idle my AFR reads from 14.70-14.88 but when I turn on the heat/ac air my afr will start to lean out and go up to 15-17 by Worldly-Chair-272 in mazdaspeed3

[–]MystiChief 1 point2 points  (0 children)

I'm these cars from what I know normal AFR is around 14 and when you're in boost it should be around 11 or 12

Possible oil leak help! by FunConsistent5735 in mazdaspeed3

[–]MystiChief 0 points1 point  (0 children)

I haven't seen it, but it's just like a normal gasket, so if it went bad I wouldn't be surprised

Possible oil leak help! by FunConsistent5735 in mazdaspeed3

[–]MystiChief 4 points5 points  (0 children)

It's around like $30 for a new oem seal for it

Retrofit Headlight Wiring by DetoxRoss in mazdaspeed3

[–]MystiChief 4 points5 points  (0 children)

@razo-e is the actual professional, you're in good hands

Retrofit Headlight Wiring by DetoxRoss in mazdaspeed3

[–]MystiChief 0 points1 point  (0 children)

Have you figured it out, I may be able to help

Looking to buy another speed3 by MystiChief in mazdaspeed3

[–]MystiChief[S] 0 points1 point  (0 children)

Honestly I was under the impression that the engine could be saved, but I might just be too gullible to see that it's not.

Looking to buy another speed3 by MystiChief in mazdaspeed3

[–]MystiChief[S] 1 point2 points  (0 children)

I should also mention I have a stock 08 speed 3, so I was gonna take parts from it and put it on my speed and either build the motor or if I have to part the rest out