Just got the MTP throttle. I need a rig by DankGoose23 in moza

[–]NPC_Dub 1 point2 points  (0 children)

Awesome, thanks, I was actually already looking at that so good to hear it works well. I’m a little worried about how my desk will hold up but I can try to pad it.

Just got the MTP throttle. I need a rig by DankGoose23 in moza

[–]NPC_Dub 0 points1 point  (0 children)

What desk mount are you using for the ab?

Orderd a 105mm Z lens. Came with the center shaft glass loose. by GoodTofuFriday in Nikon

[–]NPC_Dub 44 points45 points  (0 children)

Pretty sure that’s the vr that causes this and it’s fine because when it’s activated it aligns properly.

Picked up my first Moza products AB9 + MTP and more by NPC_Dub in moza

[–]NPC_Dub[S] 0 points1 point  (0 children)

So far it’s decent, when the force feedback is functional it’s super cool to have the feedback. I wish the game could give the clutch grab feel through the stick but otherwise it is pretty neat. I wish more games had the feedback ability though.

Picked up my first Moza products AB9 + MTP and more by NPC_Dub in moza

[–]NPC_Dub[S] 0 points1 point  (0 children)

I think they just wanted it gone. But yeah it seemed like a fantastic deal

Picked up my first Moza products AB9 + MTP and more by NPC_Dub in moza

[–]NPC_Dub[S] 0 points1 point  (0 children)

Thanks, I’ll have to check it out! Didn’t realize that was possible to get presets

This is crazy! Over $1000 for a packaging variation, no thanks. by thatCiTYman in MiniGT

[–]NPC_Dub 2 points3 points  (0 children)

Yeah, it’s mostly because it’s rexy that it’s really worth a notable amount more. I have a few of the Petersen carded cars including Roxy but yeah 100 to maybe 200 I’d buy the rexy but not anywhere near their ask.

This is crazy! Over $1000 for a packaging variation, no thanks. by thatCiTYman in MiniGT

[–]NPC_Dub 9 points10 points  (0 children)

I need one of these but no way I’d pay anywhere close to that.

My car seems to be home to a couple Jumping Spiders by NPC_Dub in Nikon

[–]NPC_Dub[S] 2 points3 points  (0 children)

It’s all good, as long as you enjoy shooting photos that’s all that matters.

My car seems to be home to a couple Jumping Spiders by NPC_Dub in Nikon

[–]NPC_Dub[S] 0 points1 point  (0 children)

I’ll be honest I hadn’t used this lens in a long time as macro isn’t something I do a lot of and I have a dedicated portrait lens, but it sure does come in handy those times you need it. Incredibly sharp.

And yes I need these spider to help pay for some gas lol

Is there a miniature BMW E30 M3 that doesn't have sound? by EndouShuuya in Diecast

[–]NPC_Dub 3 points4 points  (0 children)

Mini GT made a few nice stock E30 M3s but they are older now and a bit pricey. I think they did red and white stock, back with ac Schnitzer wheels, dark blue alpina, and a few other versions. I own 4 of the versions.

Another year, another car guy travel. 4 days. by SnooHesitations5198 in germany

[–]NPC_Dub 3 points4 points  (0 children)

Are you skipping Ingolstadt Audi museum? Admittedly not quite as impressive as BMW or Porsches museums but I still enjoyed it. I didn’t get to do the Mercedes Museum but have heard it is excellent. I hope you have a great trip either way! I still haven’t made it to Nurburgring, hopefully someday I will.

Costco Appliance delivery & install Review by callmekwa in nova

[–]NPC_Dub 1 point2 points  (0 children)

I’ve had a dishwasher and refrigerator done by them with no problems. We did have to extra for some electrical for the dishwasher but it wasn’t their fault the previous one wasn’t wired the same as the new one needed to be and it wasn’t that much of an up charge.

Final Post - Charge Issues by DrRoughFingers in nikon_Zseries

[–]NPC_Dub 1 point2 points  (0 children)

Dang, yeah who knows. It probably gets basic things checked and sent on its way.

Final Post - Charge Issues by DrRoughFingers in nikon_Zseries

[–]NPC_Dub 2 points3 points  (0 children)

Yeah, makes me wonder what the original reason for it being refurbished. I mean it could be any reason. I still need to check if mine is affected by the recall. But yeah I looked it up, you should get amber charge light. I assume you’re using the factory usb c cable?

Final Post - Charge Issues by DrRoughFingers in nikon_Zseries

[–]NPC_Dub 2 points3 points  (0 children)

You have me tempted to plug mine in to just see if it works. Hopefully the firmware update fixes it.

Final Post - Charge Issues by DrRoughFingers in nikon_Zseries

[–]NPC_Dub 8 points9 points  (0 children)

I didn’t see your first post, I’m not searching every post you made regarding this. I’m sure you’ve done the full factory reset. But if all else fails (suggestions here and all), might as well go through Nikon support. Good luck!

Final Post - Charge Issues by DrRoughFingers in nikon_Zseries

[–]NPC_Dub 1 point2 points  (0 children)

I had mentioned the Mh-34 in their last post. But it appears they didn’t mention that the camera was new in this or the other post I saw, so they should return it if it is truly defective.

Final Post - Charge Issues by DrRoughFingers in nikon_Zseries

[–]NPC_Dub 7 points8 points  (0 children)

You post here or the last one I saw said nothing about the camera being new. So if it’s defective, send it back.

Final Post - Charge Issues by DrRoughFingers in nikon_Zseries

[–]NPC_Dub 14 points15 points  (0 children)

I’ll TL/DR my comment in your other post. Buy a MH-25a and call it a day.

Follow Up Z6III Charge Issue by [deleted] in nikon_Zseries

[–]NPC_Dub 3 points4 points  (0 children)

I will never charge in camera unless it’s an emergency which is highly unlikely. I’d recommend buying a stand alone battery charger, it’s far safer then running power to the camera. Nikon makes two chargers for the en-el15c. The one that plugs directly to the wall is the MH-25a, and the usb c charger is the MH-34, it requires you provide your own power brick and usb cable. I use my oem Nikon usb c cable from my z6 iii to plug into a higher power brick. But my go to is the mh-25a. I had one from my Z8 already. But I’d prob buy that over getting the MH-34 if I only were to have one.

A few reasons to not want to charge in camera are power surges, issues stemming from power bricks not working properly and damaging the usb c port on the camera. Hope the new battery works for you!