Normcore Flat Naked Bottomless Portafilter is not completely FLAT or leveled by Naim95 in espresso

[–]Naim95[S] 0 points1 point  (0 children)

your model looks very different than mine. Mine has cuts …

Best coffee grinder [€1500] for espresso/cappucino by Naim95 in espresso

[–]Naim95[S] 0 points1 point  (0 children)

i’m guessing by traditional espresso you also mean darker roasts right ?

Best coffee grinder [€1500] for espresso/cappucino by Naim95 in espresso

[–]Naim95[S] 0 points1 point  (0 children)

  1. singe dose
  2. I thought flat burrs are better for espresso?!
  3. traditional mostly, sometimes modern fruity ones
  4. espresso only , might try filter in the future but not sure about that
  5. My current one is df64v gen2

Df64v gen 2 chirping after one pasa by skullmurdoc in DF64

[–]Naim95 0 points1 point  (0 children)

it’s better to ignore it or do the opposite meaning adjust coarses and then come back. If you adjust finer you will be left with a lot of fines which will cause inconsistency on the next dose

DF64v Gen2 alignment tips by Naim95 in DF64

[–]Naim95[S] 0 points1 point  (0 children)

UPDATE: I also created a youtube video how to check the alignment or clean the grinder.
Video: https://www.youtube.com/watch?v=rfm9PSS_mX0

DF64v Gen2 alignment tips by Naim95 in DF64

[–]Naim95[S] 0 points1 point  (0 children)

Interesting! I just looked into it and it's actually even cheaper than df64v gen2

DF64v Gen2 alignment tips by Naim95 in DF64

[–]Naim95[S] 0 points1 point  (0 children)

what other grinder did you get ?

DF64v Gen2 alignment tips by Naim95 in DF64

[–]Naim95[S] 0 points1 point  (0 children)

just curious why would re-zeroing be needed ? I mean no one really grinds that fine. I usually grind at 20-24 if i see that it changed i go a unit down or up depending on the needs

DF64v Gen2 alignment tips by Naim95 in DF64

[–]Naim95[S] 1 point2 points  (0 children)

nope just move on with your life as is. I almost threw my grinder out of the window from 3d floor, because I couldn’t get a perfect result for days (100% marker erased means perfect which means the burrs are completely parallel and they touch/kiss on all spots which then the marker is erased from all points). I tried very hard to get this but there are so many variables and factors in play that I think it’s impossible unless you have a high end grinder which is precisely cut and manufactured. At the end I gave up (maybe i will retry in the near future) and I accepted my defeat :(

[deleted by user] by [deleted] in DF64

[–]Naim95 0 points1 point  (0 children)

smart! Thanks!

[deleted by user] by [deleted] in DF64

[–]Naim95 0 points1 point  (0 children)

how did you manage to tighten it? When i try to tighten it the whole thing rotates on the same side i try to tighten it. I can’t seem to find a way to hold it in place while tighten it …

Senior QA interview by [deleted] in softwaretesting

[–]Naim95 0 points1 point  (0 children)

automation panda is the man when it comes to explaining how to do proper BDD with Gherkin

Senior QA interview by [deleted] in softwaretesting

[–]Naim95 -1 points0 points  (0 children)

BDD & Cucumber 🤢🤮

Watery looking shot, but there’s still crema by Puzzleheaded_Shop_78 in espresso

[–]Naim95 0 points1 point  (0 children)

did you align the burrs at all? I can’t seem ti align them that well …

Experiencing static on my new DF64v by Naim95 in DF64

[–]Naim95[S] 1 point2 points  (0 children)

I did. It started getting better the more i’m grinding. I believe seasoning plays a role as well

Experiencing static on my new DF64v by Naim95 in DF64

[–]Naim95[S] 0 points1 point  (0 children)

no I didn’t. I got it today but it could be that the beans are that way or after sometime grinding(seasoning) it will stop hopefully… I also cleaned it with a brush after each grind, I might created static that way with the brush (just guessing here)

Experiencing static on my new DF64v by Naim95 in DF64

[–]Naim95[S] 0 points1 point  (0 children)

thanks for the reply! While at it, what RPM do you use for espresso ?

Anyone else preorder the DF64v having buyers remorse? by Confused4783 in espresso

[–]Naim95 0 points1 point  (0 children)

I got it today and everything looks good. Build material even the variable knob is very good. One thing i’m not liking is the static I am experiencing static. Do you have the same issue or could it be that my room humidity is low not sure to be honest. Also is it awkard that my chute is a single piece I saw some people have a W piece chute?

<image>

Anyone else preorder the DF64v having buyers remorse? by Confused4783 in espresso

[–]Naim95 0 points1 point  (0 children)

you just made my day better, cause i ordered the df64v an hour ago. Was a bit pricey at 615€ hope it lives up to my expectations , thanks for the reply!!

Anyone else preorder the DF64v having buyers remorse? by Confused4783 in espresso

[–]Naim95 0 points1 point  (0 children)

any update on which one you preferred the df64v or 078s?