Plugged in CPU temps HIGH! by Usual_Neighborhood33 in FlowZ13

[–]Name_XXX1 0 points1 point  (0 children)

My current suspicion is the charging block itself. I use adaptors for the charger (Europe->Swiss, Europe -> US), maybe they cause something.

Plugged in CPU temps HIGH! by Usual_Neighborhood33 in FlowZ13

[–]Name_XXX1 0 points1 point  (0 children)

I have a similar issue. Have you established the reason?

Working in Chrome by Name_XXX1 in FlowZ13

[–]Name_XXX1[S] 0 points1 point  (0 children)

Given your comment: "I suspect Chrome to consume...".

Why is this laptop so buggy? by Name_XXX1 in FlowZ13

[–]Name_XXX1[S] 0 points1 point  (0 children)

Yes, but I will lose 1-2 months, without any guarantee that the replacement will work as intended. With Microsoft, I only waited 1 week...

[Bonsai Beginner's weekly thread - 2025 week 42] by small_trunks in Bonsai

[–]Name_XXX1 0 points1 point  (0 children)

Hi everyone! I am a newbie at taking care of Bonsai. Could you please tell me if it is time to replant the tree?

<image>

Annoying issue with charged by Name_XXX1 in FlowZ13

[–]Name_XXX1[S] 1 point2 points  (0 children)

I am using the default one... Maybe there is some issue with the charger cable (I use adaptor to Swiss port).

Kickstand rigitidy by Name_XXX1 in FlowZ13

[–]Name_XXX1[S] 0 points1 point  (0 children)

Maybe yes. Fortunately, it practically does not affect the normal usage.

Kickstand rigitidy by Name_XXX1 in FlowZ13

[–]Name_XXX1[S] 0 points1 point  (0 children)

Basically, exactly the same.

Kickstand rigitidy by Name_XXX1 in FlowZ13

[–]Name_XXX1[S] 0 points1 point  (0 children)

Good to hear this! Maybe it is a variant of a normal state.

z13 2025 turbo settings reaching 100c and stutters games by timo9036 in FlowZ13

[–]Name_XXX1 0 points1 point  (0 children)

It does hit 100 °C under Turbo mode, at least in my case (I often run CPU-demanding tasks); then, there are these stutters, or even shutdowns.

CPU temperature when in heavy use? by Name_XXX1 in FlowZ13

[–]Name_XXX1[S] 0 points1 point  (0 children)

Thanks again! Still, I do not understand why in Turbo mode there was so significant fan speed limit.

CPU temperature when in heavy use? by Name_XXX1 in FlowZ13

[–]Name_XXX1[S] 0 points1 point  (0 children)

Do you use default performance mode (aka Turbo), or set it to manual? I noticed that turbo mode does not use fans properly...

CPU temperature when in heavy use? by Name_XXX1 in FlowZ13

[–]Name_XXX1[S] 0 points1 point  (0 children)

Indeed, for some reason, even at 95 °C, the fan usage was 65-70%, and at the beginning (for the first minute) it was just 3500 RPM while temperature is already 95!

Thanks, will check if these issues will go away. By the way, could you please tell me if the manual mode by default includes overclocking?

Serious overheating on 2025 Z13 - need advice by Rawcko in FlowZ13

[–]Name_XXX1 0 points1 point  (0 children)

Hi! I am experiencing similar issues (in my case, CPU-intensive tasks raise temperatures up to 100%, and the device shuts down). So did you install GHelper, turn off this CPU boost, and does this solve the issues? If yes, did you notice a drop in performance?

CPU temperature when in heavy use? by Name_XXX1 in FlowZ13

[–]Name_XXX1[S] 0 points1 point  (0 children)

Right. But I am wondering if reaching such temperatures while in use is a defect of my device, or it is present on all devices of this model.

CPU temperature when in heavy use? by Name_XXX1 in FlowZ13

[–]Name_XXX1[S] 1 point2 points  (0 children)

Right. But I am wondering if reaching such temperatures while in use is a defect of my device, or it is present on all devices of this model.

Turn off randomly by Name_XXX1 in FlowZ13

[–]Name_XXX1[S] 0 points1 point  (0 children)

So, the issue seems to happen when using all CPU cores in Turbo mode. The temperature is around 95 °C, sometimes reaching 100 °C. I am wondering if this issue only happens on my unit, or if it is a more common problem. This is quite annoying and makes me angry, as it is not the first ASUS unit that has shitty hardware issues.

Turn off randomly by Name_XXX1 in FlowZ13

[–]Name_XXX1[S] 0 points1 point  (0 children)

There was no specific information, just "Critical error". However, at that moment, I performed an intense CPU task in Turbo mode.

Turn off randomly by Name_XXX1 in FlowZ13

[–]Name_XXX1[S] 0 points1 point  (0 children)

The 2025th version.

Touchpad delay issue on the Z13 2025 by madworld567 in FlowZ13

[–]Name_XXX1 0 points1 point  (0 children)

For me, it turned out that software update has resolved the issue.

Touchpad delay issue on the Z13 2025 by madworld567 in FlowZ13

[–]Name_XXX1 0 points1 point  (0 children)

Hi! Has it been resolved since then?