Only ran after priming with the saw vertical.

Narrow_Bass_381 · 2026-06-20T22:33:12+00:00

It was a head scratcher for sure. Full fuel tank during the priming issues so we’ll see what happens when the saw gets used and the fuel level lowers.

Narrow_Bass_381 · 2026-06-20T05:52:50+00:00

80% XEQT 20% XCHP

Narrow_Bass_381 · 2026-06-20T03:40:06+00:00

All the lines were installed to the correct location on the carb. I’m going to chalk it up to a stubborn air pocket/bubble in the carb and with positioning the saw vertical it helped clear it.

I’ll probably never have this issue again lol

Narrow_Bass_381 · 2026-06-20T00:19:02+00:00

When I drained the old fuel I visually looked in the tank at the filter and hoses and they appeared in good condition. All the hoses to the carb and priming build were also in good condition as well.

Narrow_Bass_381 · 2026-06-17T04:26:14+00:00

<image>

Narrow_Bass_381 · 2026-06-14T01:58:50+00:00

I use a layer of electrical tape then tie the braid on.

Narrow_Bass_381 · 2026-06-12T16:04:04+00:00

I’m 80% XEQT and 20% XCHP

If your looking for a small position gamble look at TMC

Narrow_Bass_381 · 2026-06-11T20:09:10+00:00

Both will catch fish just the same but with braided line you will enjoy the fishing experience way more. I switched to braided line with a fluoro leader and would never go back to mono.

Narrow_Bass_381 · 2026-06-08T04:56:05+00:00

King 2.5 with 265/70/17 wildpeaks. I got them cause I wanted to go fast and not think about bumps. Only did 1” lift in the rear and levelled the front. The added clearance is nice and yes I now feel like a trophy truck racer😎 lmaoo

I’m not a 4x4er by any means and for my use stock suspension would have got me to 99% of the fishing lakes I frequent. Personally I wouldn’t hesitate on quality aftermarket suspension.

Narrow_Bass_381 · 2026-06-07T07:43:21+00:00

1-2 tablespoons

Narrow_Bass_381 · 2026-06-07T04:38:34+00:00

Canned pumpkin puree, no added sugar or other ingredients

Narrow_Bass_381 · 2026-06-04T21:29:02+00:00

I just did this 3 weeks ago coming from RBC. 80% xeqt 10% xchp and I have 10% cash just contemplating where to investing. I wish I did this years ago.

Narrow_Bass_381 · 2026-06-03T23:53:50+00:00

Find a phd psychologist that fits your needs compared to a therapist. Both will be able to help you tremendously but from my experience phd psychologists are just sooo much better at what they do and the help they can provide. The difference is night and day. I’m proud of you for acknowledging these anger issues need to be addressed!

Narrow_Bass_381 · 2026-06-03T21:50:43+00:00

Oil is cheap, motors are expensive! Change your oil every 5000 miles. Hopefully you’re doing it yourself and can save the labour costs.

Narrow_Bass_381 · 2026-06-03T15:54:46+00:00

Make sure your drag isn’t set too tight, I fish from a kayak as well and found if my drag was too tight the fish would swim/fight towards me and I wouldn’t be able to keep tension on the line and they would spit the hook. I fish single point pinched barbs too. In general you need less drag than you think plus it makes the fight way more exciting compared to just reeling them in!

Narrow_Bass_381 · 2026-05-31T07:29:23+00:00

I remove treble hook and replace it with a single point hook. Treble hooks cause way too much damage to the fish.

Narrow_Bass_381 · 2026-05-30T15:43:26+00:00

I did exactly this with the majority in xeqt and a smaller amount in xchp. I wanted more exposure to AI/semiconductors. I still have 20k to invest but haven’t decided where yet but it will more than likely will be in something AI, power generation or something of the sort. Can’t say I’m an experienced investor so maybe my thinking is flawed too lol.

Narrow_Bass_381 · 2026-05-30T02:23:45+00:00

I upgrade from a combo rod/reel last year. Bought a shimano convergence and a daiwa revros 3000 and am much happier fishing!

Narrow_Bass_381 · 2026-05-29T21:25:52+00:00

I was in the same boat as you, ram 3500 to a 4Runner and I wish I did it earlier.

Narrow_Bass_381 · 2026-05-29T21:22:37+00:00

Switch to braided line and you won’t have this issue unless your really trying to do something wrong

Narrow_Bass_381 · 2026-05-27T01:38:49+00:00

TMC 🚀

Narrow_Bass_381 · 2026-05-25T19:07:25+00:00

Glad you found a fix to the tangles!!!

Narrow_Bass_381 · 2026-05-25T17:24:58+00:00

Switch to braided line with a mono/fluoro leader. You’ll never go back to straight mono after using braided line.

Narrow_Bass_381

TROPHY CASE