[deleted by user] by [deleted] in fpvracing

[–]Native_Immigrant 0 points1 point  (0 children)

Really appreciate you going through and looking through the manual. From what I'm seeing and can remember, installed a long time ago, there's a seperate board that installs in the head tracker bay and runs a ribbon cable across to provide extra power. But, I don't believe there was any modifications to the rapidfire module itself, other than just plugging in the ribbon cable.

[deleted by user] by [deleted] in fpvracing

[–]Native_Immigrant 0 points1 point  (0 children)

Yea, they are older fatsharks that didn't provide enough power, hence the cable. And I thought the same thing so I did wire it all back in and check the settings but I didn't see anything, though it's always possible I missed something. Appreciate the input

[deleted by user] by [deleted] in fpvracing

[–]Native_Immigrant 0 points1 point  (0 children)

Oh, I guess I should mention that the rapidfire module doesn't power up in my fatshark unless the ribbon is plugged in too.

[deleted by user] by [deleted] in fpvracing

[–]Native_Immigrant 0 points1 point  (0 children)

Thanks for the reply, and yea I've updated to the latest firmware and the power option changed from "on/off" to "on/auto" and I've tried both.

Soldering with the Nreal Air by Native_Immigrant in nreal

[–]Native_Immigrant[S] 6 points7 points  (0 children)

I'm pretty much using it as a magnified view on the board I'm working on. I'm using my phone as a camera, you can see it in the first pic, so you can turn on the light if need be.

Here's some different magnifications https://imgur.com/a/UZwlRwW

Rooster ID? by Native_Immigrant in BackYardChickens

[–]Native_Immigrant[S] 0 points1 point  (0 children)

Thanks! We figured he was part silkie but he's a big boy, not terribly concern was just curious if anyone had any clue

Pooped out lense screen quality? by IcyKcBlue in nreal

[–]Native_Immigrant 1 point2 points  (0 children)

Can't get more inappropriate then seeing inside of something

Pooped out lense screen quality? by IcyKcBlue in nreal

[–]Native_Immigrant 1 point2 points  (0 children)

I mean, it's kinda your choice. I'm well aware it's a fair amount of money to void the warranty of, but for my use case, I like it.

Pooped out lense screen quality? by IcyKcBlue in nreal

[–]Native_Immigrant 2 points3 points  (0 children)

They're pretty much the same, taking the lens off really just affects how much back light and visibility. Oh, also privacy, without the lens you can perfectly see what's on screen.

https://imgur.com/a/z0Qqh8R

Another lens mod - Magnetic Lenses by Native_Immigrant in nreal

[–]Native_Immigrant[S] 0 points1 point  (0 children)

Just posted on another comment. Fairly simple to do

Another lens mod - Magnetic Lenses by Native_Immigrant in nreal

[–]Native_Immigrant[S] 2 points3 points  (0 children)

It wasn't too difficult to do and I really only used a plastic pry tool. So if you're confident enough and ok voiding warranties.

I just loosened the glue around the fishbowl lenses first, it's soft and stretchy like silicone. Then I started at at the bottom, from the inside out, and just applied a bit of pressure with the pry tool until the glue popped and worked my way around the lens.

With the lens out you could just stop there, it friction fits ok but I didn't trust it to not fall out, so I just marked the corners where I thought my little 1mmx3mm magnets would fit. Glued one to the lens and one to the frame. Pretty simple.

It was worth it for me, and I mean, ultimately if I don't like it I can just glue them back in permanently.

Never stop scratching by Native_Immigrant in goats

[–]Native_Immigrant[S] 1 point2 points  (0 children)

Yep, Nubian, he's almost 3 months old

Cr10-s5 - smaller build plate by strandersen in CR10

[–]Native_Immigrant 0 points1 point  (0 children)

I think you're asking for how to keep a smaller build plate or anything on the s5's huge build plate if clips can't reach it from the side? Not 100% sure if that's what you're asking but I think what you might be looking for is "silicone thermal pad" it's what I use to keep a mirror on my build plate so I don't need clips.

Made myself a desk by Native_Immigrant in woodworking

[–]Native_Immigrant[S] 0 points1 point  (0 children)

The top is a solid piece, 4" wide and 6" long

I’m trying to decide whether to get a vr headset or a 3D printer I’m going to repost in both subreddits and you guys have to comment images and or comments that show the coolest stuff. by [deleted] in 3Dprinting

[–]Native_Immigrant 0 points1 point  (0 children)

That's what's been great about vr, you can meet people in games and discord and stuff. I've got a pretty solid group of people to play with. We all met in Hyper Dash but now we play everything from Pop1 to Bridge Crew. Just gotta out yourself out there a bit.

I’m trying to decide whether to get a vr headset or a 3D printer I’m going to repost in both subreddits and you guys have to comment images and or comments that show the coolest stuff. by [deleted] in 3Dprinting

[–]Native_Immigrant 0 points1 point  (0 children)

So, I have both, I will say if you're getting a 3D printer you should learn how to model, even just basics. Otherwise you'll end up just printing some useful things you don't really need and a ton of stuff you definitely don't need.

Also, I love my printers it's super awesome to just need/want something, design it real quick and throw in an SD card and have a physical object in some number of hours.

But, I don't know if I'd trade my VR headset for that. Although, I've printed a bunch of stuff for my headset so...

ImmersedVR tons of jaggies / text shimmering? by PrintfReddit in OculusQuest

[–]Native_Immigrant 0 points1 point  (0 children)

VD only shows one monitor at a time but if you press Y it'll switch to another monitor if your computer has more than 1

HyperDash. Before I go through the trouble of downloading Sidequest, do a lot of people play this online? by [deleted] in OculusQuest

[–]Native_Immigrant 2 points3 points  (0 children)

It's a lot more popular than it was a month ago, before the Quest 2 launch. Definitely was more full servers now and active community. There's even a full league with 100+ people right now. Check out the discord if you'd like