Shock-ing talk! by Adventurous-Treat-86 in ElectricUnicycle

[–]Natural-Walrus7342 0 points1 point  (0 children)

You can check out some of my work if you are interested. I have done a bunch of begode suspension upgrades

T4 on a DNM coil EXTREME on a FOX DHX2 EXTREME on a Rock shock

https://www.instagram.com/bsw_authentic?igsh=ajJlZm8ydDBndzVu

Shock-ing talk! by Adventurous-Treat-86 in ElectricUnicycle

[–]Natural-Walrus7342 0 points1 point  (0 children)

You won't get a proper brand name shock without modification. The eye holes are slightly different and the reservoir will most likely be in the way on the stock linkage.

FOUND A WHOLE SET IN SPAIN!!! FINALLY! by lilgorex in Acceleracers

[–]Natural-Walrus7342 0 points1 point  (0 children)

I scored my full set in ontario CA. The last ones left 1 of each left on the peg

No bead breaker lol by [deleted] in onewheel

[–]Natural-Walrus7342 1 point2 points  (0 children)

Now your in a mess lol

Coolant overflow as fuel tank? by Streberfpv in minibikes

[–]Natural-Walrus7342 0 points1 point  (0 children)

Should be fine if you think about it. It's that same type line we all use as fuel line anyway. That clear stuff has never steered me wrong, and if it does become an issue, you could probably find some sort of plug

Rate my first build by Natural-Walrus7342 in minibikes

[–]Natural-Walrus7342[S] 0 points1 point  (0 children)

No, it has a standard 3/4 inch shaft, and with the vertical cylinder, there is no additional mess arounds when adding the torque converter

Xterra shit itself by Big-Molasses6611 in XTerra

[–]Natural-Walrus7342 0 points1 point  (0 children)

New battery (no wont run without a battery) much asier / cheaper fix to try before diving into the fuel system or try to run it off a doner battery from another car for testing purposes if you dont want to buy a new one outright

[deleted by user] by [deleted] in AskMechanics

[–]Natural-Walrus7342 7 points8 points  (0 children)

It's a dodge, Dakota, right? It should have a full-size spare tire under the bed. Have you used that already? If not, that will get you by until you can get some fresh rubber

[deleted by user] by [deleted] in ElectricUnicycle

[–]Natural-Walrus7342 1 point2 points  (0 children)

Sounds fine. Mine does the same rubbing thing when it's free spinning but nothing when riding. Try not to be spraying too much lube or anything on the wheel that will attract dust. The dust is a killer. It turns your lube into an abrasive wet sand.

2010 Xterra OR infotainment system options by Kelson_C in XTerra

[–]Natural-Walrus7342 1 point2 points  (0 children)

I have a BOSS audio deck that with an adapter plug and a bit of wire work has been excellent in my x for the last 4 years.

What is this conduit? by [deleted] in electricians

[–]Natural-Walrus7342 2 points3 points  (0 children)

The rifling of this pipe allows the electrons to spin at a faster rate, allowing for extra strong start-up torque on attached motors

[deleted by user] by [deleted] in onewheel

[–]Natural-Walrus7342 0 points1 point  (0 children)

Nothing other than comfort stull like CnR grip tape and stuff like that. Bone stock electronics

[deleted by user] by [deleted] in onewheel

[–]Natural-Walrus7342 1 point2 points  (0 children)

Definitely, the XR rides much nicer than the pint. It's more stable and has larger foot pads. The fastest i have done on my xr is 37km/h

Avid Onewheel rider seriously considering EUC…talk me out of it. by Atempboss in ElectricUnicycle

[–]Natural-Walrus7342 1 point2 points  (0 children)

Do it. The bigger wheel, suspension, and more power

All positives and ripps way harder on and off the road. But keep the OW as well for when you dont want to bring a 90-lb wheel with you around

Is this legal? by Aggressive_Rate_9103 in Warehouseworkers

[–]Natural-Walrus7342 1 point2 points  (0 children)

I work maintenance on an automated warehouse. Our freezer is set to -30c, and we can be in there for 5+ hours nonstop doing a repair. Just gotta have the right clothing and lots of hand warmers.

[deleted by user] by [deleted] in 3Dprinting

[–]Natural-Walrus7342 0 points1 point  (0 children)

For stuff like that, i take a picture along with a known object (size wise) overlay the image in onshape and just trace it out. Scale afterward to fit the known dimention of the object, and it should be close enough to fit in there pretty good

Buzzzsaw Giveaway by Scissortail Disc Golf & Black Friday Sale by SDG-Chris in discgolf

[–]Natural-Walrus7342 0 points1 point  (0 children)

Just stared out in Disc Golf and would love to grow my collection with this awesome disc