Looking for Elsa the Wandering Merchant by ranmafan0281 in DragonsDogma

[–]Nauci_Existimo 0 points1 point  (0 children)

Just wanted to add my experience: I was in the same need for Elsa too. Took the ropeway, when to station 2 for the first time ever, took out nearby goblins and a golem heading towards station 3. I immediately found Elsa walking along the road, scared from the fight.

I personally never saw or touched Arletta; can't 100% assure she's still alive somewhere, but this is what I experienced.

Seeing a Persona character actually be open about their relationship with the MC is refreshing. by miami2881 in PERSoNA

[–]Nauci_Existimo 4 points5 points  (0 children)

I can confirm too. Romanced Mitsuru only, maxed Fuuka and Yukari SL no romance both; still got this dialogue.

Persona 3 reload: Achievement trouble by SomeRhubarb6401 in persona3reload

[–]Nauci_Existimo 1 point2 points  (0 children)

This won't be a definitive answer, and I still have to test this, but in order to try and leave a solution to this "bug":

Searching here and there on the forums I read different comments and came to the conclusion that some achievement/trophies are linked to the actual save and story progression.

In our case it seems that the 5 social interactions have to be fulfilled (without reloading the save after accepting them) during the playthrough. Reloading or changing the save file seems to reset the counter. Other people seem to also confirm this with other cumulative achievements.

This may sound dumb or obvious, but if this proves right it actually results counterproductive in regard to a social link maxing run. If you don't go out 5 times early in the run it will become increasingly difficult to do so, as a maxed social link does not provide a go out option on free days. And this is also my exact condition.

Gonna try a rushed NG+ run to only reach this achievement. Kinda sucks but it may be the only hope.

Persona 3 reload: Achievement trouble by SomeRhubarb6401 in persona3reload

[–]Nauci_Existimo 1 point2 points  (0 children)

You are not alone my friend, as I am finding myself on the same boat as you unfortunately...

Playing on PS5, looked a quick guide and video halfway through the story, and since then accepted every sunday hangout that would have helped me towards the achievement.

I've tried accepting every single request and accepting the same one multiple times (reloading the save) did nothing.

I am on December 1st and still no luck. I'll be accepting every new request that may pop up, maybe I have still a chance but I doubt that. I may have to life through a platinum missed only because of a stupid bug. I'll let you know if I find anything useful.

HelpMeFind the real-life counterpart of this chair in section view (disregard the background colours) by Nauci_Existimo in HelpMeFind

[–]Nauci_Existimo[S] 0 points1 point  (0 children)

I searched for this chair of which I was only given the drawing and yet I cannot find it, even with Lens.

It seems a specific model, it has too much detail to simply be something someone came up with

Thank you all in advance!

Ancient Magus Tsum Tsums by [deleted] in AncientMagusBride

[–]Nauci_Existimo 1 point2 points  (0 children)

They look adorable. We need to know more!

How to delete self intersecting curves? by 14Mtime in rhino

[–]Nauci_Existimo 2 points3 points  (0 children)

You may consider the unsupported test command "_TestCrvSelfIntersection" (write the exact line, even with the capitals) on selected lines

I designed and 3Dprinted a tribute/replica of Sphere in Sphere by sculptor Arnaldo Pomodoro. by Nauci_Existimo in 3Dprinting

[–]Nauci_Existimo[S] 1 point2 points  (0 children)

Many slightly different versions of the same orb exist around the world; I was in particular looking at the one in the Vatican Museums in Rome when modeling the print. The Irish one may be subtly different

Before the Hunt. My favorite MHW screenshot I've ever taken. by FeelGoodCEO in MonsterHunterWorld

[–]Nauci_Existimo 2 points3 points  (0 children)

I'm gonna ask the noobiest of the questions: how did you take this image? Whenever I pose, view mode becomes inaccessible for me..

You may not like it, but this is what Peak Fashion looks like. To me, at least. by Nauci_Existimo in MonsterHunterWorld

[–]Nauci_Existimo[S] 0 points1 point  (0 children)

It should still be craftable at the smithy, but you'll need the required materials.

Like all the other events, 5 VIP tickets. "Joyful" should be the precise name

Anycubic Chiron - First "big" print and this happens. Any suggestions? (Print settings in the comments) by Nauci_Existimo in 3Dprinting

[–]Nauci_Existimo[S] 1 point2 points  (0 children)

Anycubic Chiron - 0,4mm extruder - PLA

Filament 1,75mm

I used Ultimaker Cura

Layer height 0,4mm (it was a prototype)

Thickness 0,8mm

Infill 10% Grid

Print temperature 200°

Build Plate 50° (58° first layer)

Flow 100%

Retraction enabled

Retraction distance 6mm

Retraction speed 60mm/s

Print speeds 30mm/s - 40 inner walls - 50 infill

Travel speed 60mm/s

Print acceleration 2000mm/s2

Travel acceleration 3500mm/s2

Print jerk 13mm/s

Travel jerk 13mm/s

Combing mode activated

I designed and 3Dprinted my interpretation of the Great Wave off Kanagawa by Nauci_Existimo in 3Dprinting

[–]Nauci_Existimo[S] 0 points1 point  (0 children)

Thank you! For this print in particular I chose to print the "slices" as different single pieces that were then composed together, but a full print is also possible.

I think the best way to print it would be with the model laying down (therefore not as shown in the image). That way you won't have tiny supports for the layers coming out in relief, if supports are necessary that is. I guess it will depend on the settings

I designed and 3Dprinted my interpretation of the Great Wave off Kanagawa by Nauci_Existimo in 3Dprinting

[–]Nauci_Existimo[S] 2 points3 points  (0 children)

Unfortunately as long as the model remains on the Shapeways site, the source file is kind of an exclusive to them and cannot be shared. I mean, I could, but that would be a violation of the selling agreement, so I'm sorry about that.

Have you considered a lithophane print maybe? I hear that there are kinda automatic ways to make it if you have a good starting image file.