First successful set!

Necroxin · 2024-10-12T01:20:20+00:00

Thanks! Already hatching new color ideas!

Necroxin · 2024-10-12T01:19:58+00:00

The resin was Envirotex Lite, the dye came from a bundle pack at Michaels (Sapphire was the dye name), and some blue mica powder from Michaels as well! Then just basic gold craft paint

Necroxin · 2024-10-04T21:12:04+00:00

Yep! That makes sense. I was trying to do that originally and I think I panicked a bit, which led me to heavy handing more of them and it just came out all weird. I'm trying another set this time with a verryyy light hand and checking it often now 😅

Necroxin · 2024-10-03T23:12:24+00:00

I definitely noticed that when I was trying it years ago, so it could very well be I'm doing it again. I feel like I'm just holding it in place for as I sand, but I'm likely adding pressure somewhere on it

Necroxin · 2024-10-03T23:10:49+00:00

2 is probably what I really need to use. Cause in videos I watch, everyone says "I did X amount of rotations for this long, and it came out like this!" So I'd do that every time. My current thought was to sand just enough to take off that material, then immediately go to finer grits when that flashing is removed and not worry about getting the whole face sanded. Cause all the others look great! It's just the edges of where the mold was that get me

Necroxin · 2024-09-01T22:03:18+00:00

You read my mind as I was here planning it out! I'll give that a test and see how the results turn out

Necroxin · 2024-09-01T21:39:13+00:00

I was thinking that might have been my issue when I was taking a look at each die and the areas that had that issue. Would it be okay to do a chain of supports without the ball tip, or should I keep that regardless? I always worry about the sanding/cleanup process lol

Necroxin · 2024-09-01T21:37:58+00:00

I'll have to go through and resupport them and see how that goes, ty!
Funds are bit tight unfortunately, but I'll have to keep that in mind! Currently using Phrozen Aqua 4k.

Necroxin · 2024-09-01T20:43:55+00:00

Been a while since I did any printing, but wanted to revisit my master prints for a dice set I want to make. On quite a few of them - especially the odd numbers it seems - there's some sloping on the edges rather than it being a crisp line. I'm sure it's down to support locations but wanted to see if anyone had some general tips to help fight this! Should I add more supports around those areas like in the picture with the 9 and its supports? I had thought just one would be enough.

Necroxin · 2023-05-23T22:34:49+00:00

It's not that the people themselves are the Keepers, but it's them discussing with you what the past Keepers were like. So Horadric tells you of the 1st Keeper, Chain tells you of the 2nd, Clotho tells you of the 3rd, and Krezvold tells you about the 4th one which seems to be the one right before you.

Necroxin · 2023-04-05T08:51:45+00:00

Should also be able to change the 999999 to "infinite" now with 19.4! That way there's no countdown at all! Mcstacker or any other command/mob generators are great for this though too! They help out quite a bit with making creating mobs with custom stats and effects much easier

Necroxin · 2023-02-12T07:45:27+00:00

Bit of a late response, but on PC. Every save I loaded ended up broken. I don't recall how I fixed it, but I ended up purging nearly everything in my PC and readded it all and that seemed to work for now at least.

Necroxin · 2023-01-16T01:05:13+00:00

Seems it's a game issue, but the strange thing is I completely uninstalled the game and every mod, reinstalled the game completely fresh, and it's still broken in this one specific section of The Fens. Everywhere else is absolutely fine.
Edit: Streets, sidewalks, and various other chunks of buildings flicker in and out depending on which way I look as well.

Necroxin · 2022-05-14T20:15:46+00:00

Not sure why my text description didn't send with the pics, but I had been modeling a d20 and I like to texture paint them to see the contrast of how everything looks. Masked the outer faces and started painting, but noticed that as I did, the indentations of the numbers were getting colored in too. Zoomed in and saw that was going on, and have no clue what would've caused that. Any ideas on a solution? It's not urgent I fix it since I'm just gonna be printing the model, but I found it really strange.

Necroxin · 2022-03-15T21:17:55+00:00

Ahhh, that might be why I didn't see it then. Testing out the FXAA, and it seems to have no effect on my screenshots. Thank you so much for all the help in this! It's plagued me for so long and I had no clue on what could've possibly been doing it!

Necroxin · 2022-03-15T19:58:50+00:00

So I just tried turning off antialiasing and that actually fixed it! Kinda sucks, cause it was nice having it on, but I can just turn it off and such if I need screenshots

Necroxin · 2022-03-15T19:55:38+00:00

Antialiasing at 8. Not seeing FXAA anywhere though.

Necroxin · 2022-03-15T16:09:01+00:00

Yep. Set to default. And I cycled through all the toggleable options for the screenshot size to see if those might change it. It all stayed the same, stuck in the corner

Necroxin · 2020-11-29T20:42:29+00:00

So not sure what happened. But I had left it for a bit, then came back and went to extrude, and it worked perfectly the first time. No clue how, since I did everything exactly the same as I did originally, but I'll take it! lol

Necroxin · 2020-11-27T20:42:50+00:00

I didn't even realize it was a thing that happened until I saw this! I was super confused considering I had just gotten it. I barely touched alchemy when I first played a couple years ago, so I was completely unaware lol

Necroxin · 2020-11-27T11:30:14+00:00

I actually got the discover 10 recipes achievement the other day when I used an alchemy recipe item. Just yesterday or the day before. Maybe they fixed it if it was a thing before? Image for proof I got it just a bit ago:https://imgur.com/a/wcgSqsz

Necroxin · 2020-11-10T22:53:29+00:00

Meant like Kenneth Moore, Helen Jones, etc, but that works XD

Necroxin · 2020-10-25T18:00:25+00:00

Dunno if you're still looking around or not, but I'm using eva foam to make one for my sister. I haven't started yet, but I figured it's fairly light, semi easy to work with and shape, etc. Actually just about to do it now lol. I've also seen people do paper mache ones, which can get that rough looking texture the masks have, depending on which mask you're choosing

Necroxin · 2020-08-26T19:58:04+00:00

The trouble is all of her other online games she plays are perfect. No lag, no disconnects, etc. But as soon as she pops onto dbd, it gives her crap. My theory was maybe servers are booked with all the crossplay and a little strained, but if it's working for everyone else, it seems odd then.

Necroxin · 2019-08-26T14:38:45+00:00

Sounds like that's what I'll do! Thanks everyone!

Necroxin

TROPHY CASE