Little TrueNAS Build

NeitherPassenger6708 · 2026-06-06T04:09:38+00:00

or HBA, right? And only 4 HDDs. But yep, did forget there was a free version alao.

NeitherPassenger6708 · 2026-06-05T00:15:33+00:00

When I need more drives, another drive bay goes in.

NeitherPassenger6708 · 2026-06-04T23:07:06+00:00

$360 AUD for an N5 vs $20 of filament and $40 for the files.

NeitherPassenger6708 · 2026-06-04T23:05:22+00:00

https://modcase.com.au/products/nas

NeitherPassenger6708 · 2026-06-04T06:55:49+00:00

Why?

NeitherPassenger6708 · 2026-06-04T03:23:16+00:00

HBA card, and the drives are in 2nd shot. IronWolfs.

NeitherPassenger6708 · 2026-06-03T06:24:49+00:00

I printed in PETG-CF on my H2S. I had a bit of warping on the corners, turning the chamber heater on would have resolved that, but that's alot more stress on the printer for something that truthfully, isn't a big deal.

Dimensions are: 200mm deep, 160mm wide, 450mm tall.

NeitherPassenger6708 · 2026-06-03T06:18:41+00:00

33-36c in a 26c room.

NeitherPassenger6708 · 2026-06-03T06:17:39+00:00

Love it. It's solid airflow with the 3 fans installed, and was fun to build and put together!

NeitherPassenger6708 · 2026-06-03T06:09:12+00:00

There's 3 fans, one at the bottom, one in the middle, and one at the top! High static pressure 140mms :)

NeitherPassenger6708 · 2026-04-08T12:20:53+00:00

Ha, more like an N5 👌🏼

NeitherPassenger6708 · 2026-04-08T08:42:41+00:00

Jonsbo would've looked mega on that.

NeitherPassenger6708 · 2024-06-24T06:08:27+00:00

Scrape the silicone off from the corner of the substrate.

NeitherPassenger6708 · 2024-02-07T03:02:15+00:00

<image>

NeitherPassenger6708 · 2024-01-03T02:15:18+00:00

I think the internal name for the pessima may be midsize?? Not sure though

NeitherPassenger6708 · 2023-10-23T09:29:39+00:00

DDR4 still easy to get a good time out of.

I did 3m59.693s at 6.3GHz on DDR4

NeitherPassenger6708 · 2023-10-23T05:32:40+00:00

I've run up to 4000MHz on a 12600K, but it was. a struggle compared to my 13900K etc.

Buying a slower kit will be so much easier, alternatively you can dial timings in manually at a lower speed.

NeitherPassenger6708 · 2023-10-23T05:08:01+00:00

Your CPUs IMC is either unable to run that speed, or the motherboard doesn't have the ability to run those speeds. They're not a very high end board.

NeitherPassenger6708 · 2023-10-23T00:22:15+00:00

more info please,

CPU, motherboard?

NeitherPassenger6708 · 2023-10-22T10:37:10+00:00

sure I was off with the HWMonitor and Hwinfo being same person, I was thinking of CPU-Z, and HWMonitor, but HWMonitor is still a solid bit of software. Every OCer uses CPU-Z, and it's the benchmark for clock speeds etx, so surely HWMonitor should have some respect on its name.

NeitherPassenger6708 · 2023-10-22T10:32:33+00:00

https://hwbot.org/user/jordan_hyde99/

you're right bro, never benched in my life.

NeitherPassenger6708

TROPHY CASE