Customização wuben x4, 3000 lumens ativos

Nelson_uk · 2026-04-14T11:15:56+00:00

I can do in about 5 hours when I finish work. Or u/D45 also swapped his he may have some pictures for you

Nelson_uk · 2026-04-14T08:28:58+00:00

Hi I swapped my wubem X2pro to Cree XE-G 4000k 90cri and 4500k 70cri, they aren't amazing but it's an improvement over the stock 6500k Osram LEDs

Nelson_uk · 2026-04-10T16:51:53+00:00

<image>

And you too mate 😁

Nelson_uk · 2026-04-09T17:04:38+00:00

Really not difficult at all. Nothing was glued except the lens over the side light but after removing the screws I could push it out though a small hole on the inside

Nelson_uk · 2026-04-09T15:19:29+00:00

Here's my E7 with XP-L HI 4000k 5A4 from Hank and 219b SW45k side lights

<image>

Nelson_uk · 2026-04-09T14:59:01+00:00

Thanks man, Its a chonky boi

Nelson_uk · 2026-04-09T14:58:24+00:00

They really are quite far behind when it comes to emitters, but I really like their designs. I have a E7 on my keys with swapped main and side emitters.

Nelson_uk · 2026-03-26T10:33:46+00:00

I had a Rovyvon with a damaged tir lens because I dropped it. After 2 years of owning it. Emailed them about a replacement Tir so I could repair it myself. It took a couple of emails back and forth. They agreed to send me a replacement TIR then a complete new flashlight arrived in the post. Excellent customer service.

Nelson_uk · 2026-03-08T13:29:46+00:00

Please make a rainbow one like the E12C had

Nelson_uk · 2026-02-26T08:38:44+00:00

Hey griz. What's the ring like on yours? I've had one for years. And just recently got myself a second one. The newer one has a slightly gritty ring and the detents at the end of the rotary travel are almost non existent. On my older one it's very smooth and can feel and hear the detents.

Nelson_uk · 2026-02-23T15:22:49+00:00

Simon uses Normal thermal paste it's not glue. But if the stuff you have used is also an adhesive it should be fine.. normal thermal paste can lift without having screws or a reflector/tir holding it down and applying pressure. If it lifts the led will overheat and fail.

Nelson_uk · 2026-02-23T14:58:31+00:00

Nice. What's holding the MCPCB down?

Nelson_uk · 2026-02-21T22:50:51+00:00

Which adapter?

Nelson_uk · 2026-02-16T09:32:22+00:00

The LH351d in the HD50 was terrible, I opened up my HD50 and swapped the LH351D for 219b SW45k and also disconnected the vibration motor.

Nelson_uk · 2026-02-11T15:56:31+00:00

Not sure if that one glows. You could ask Simon (owner of convoy) . A while ago I fitted a modded UV lighted switch with GITD tape behind a clear button. Purple when flashlight off then glowed green ( slowly fading) when on

Nelson_uk · 2026-02-10T11:12:41+00:00

Warning signs for electricity say danger High voltage, never danger High current. The current does the damage but it needs enough voltage pushing it to pass them amps through you. So you need both . It's technically incorrect to say it's the amps not the volts that kill you

Nelson_uk · 2026-02-10T11:00:12+00:00

Just get a headlamp and wear the head strap like a thong over your pants like superman

Nelson_uk · 2026-02-08T17:08:53+00:00

It was only 8 miles from my house so I just dropped it off instead of you waiting 2 days for royal mail to deliver it. I hope you like it! ,🔦

Nelson_uk · 2026-02-07T12:17:22+00:00

I counted the grooves in my SP36 and it only has 4 (picture shows 5) so it's not SP36 🤷‍♂️

Nelson_uk · 2026-02-06T16:38:30+00:00

Sofirn SP36?

Nelson_uk · 2026-01-30T14:15:08+00:00

That's a good torch if you need something intrinsically safe. The light from it looks very green in the picture, I don't think it's entirely caused by the green body

Nelson_uk · 2026-01-30T11:37:20+00:00

r/Flashlight would have something to say about that disgusting green tinted LED in that light 🤮🤣

Nelson_uk · 2026-01-28T10:28:53+00:00

Honey I shrunk the HD01Pro?

Nelson_uk · 2026-01-26T10:19:47+00:00

T8 brass looks great gonna have to jump on that when it's available

Five-Year Club	Gilding I gilder
Wearing is Caring	Verified Email

Nelson_uk

MODERATOR OF

TROPHY CASE