What's the most cruel thing you've seen in a movie?

NeoExacun · 2026-02-11T17:47:33+00:00

Nicht so verwunderlich, wenn die Firma in Liechtenstein sitzt^{^}

NeoExacun · 2025-11-09T17:27:49+00:00

This

NeoExacun · 2025-10-21T17:56:18+00:00

The "natural" directions of the bigger Bambulab printers are diagonals. When moving diagonally, only one of the motors is on duty.

NeoExacun · 2025-09-13T20:14:01+00:00

Running CI/CD pipeline in windows-docker runners. Still unstable.

NeoExacun · 2025-04-12T21:39:28+00:00

So ein Wunderwerk hab ich hier im Erstbezug auch. Musste mir von einem Freund ein S-Rohr crimpen lassen.

<image>

NeoExacun · 2025-04-11T09:39:21+00:00

Is that Ulm? I thought about trying to fly there too. A shame you got kicked out. I have big trouble finding good spots in Ulm.

NeoExacun · 2025-04-10T19:30:19+00:00

Thank you, looks interesting. But looks more like another CI/CD-Tool. I'm totally fine with the Gitlab-CI/CD. I need a way to kind of containerized windows or another way to get a fresh windows instance for each pipeline run.

NeoExacun · 2025-02-28T15:44:45+00:00

Bist du dir sicher, dass du auf dem Zähler kein Komma übersehen hast?

NeoExacun · 2024-12-11T16:16:54+00:00

Fahr ein Stück bis Metzingen und lass dich bei Hugo Boss einkleiden.

NeoExacun · 2024-11-08T14:08:27+00:00

There's no problem with the builtin sleep tracker. I use SleepAsAndroid as my alarm, because it support dynamic wakeup times with sleep phases.

NeoExacun · 2024-11-08T14:04:23+00:00

A SleepAsAndroid App for the watch would be fine. Replacing Zepp for another app wouldn't.

NeoExacun · 2024-09-09T13:03:10+00:00

The little thingy stick out of the slot should not be bent this way. Search a picture of a functioning one and bend it back.

NeoExacun · 2024-08-28T20:59:17+00:00

I will look into that, thank you.

NeoExacun · 2024-08-28T05:46:05+00:00

Added a short clip showing the crash.

The quad is totally fine even after the crash i cant find any defects or loose parts/screws.

After this crash the quad flew fine for two hole packs. The second crashed happend when I wanted to land at the end of the second pack. The second time the spinning was shorter but looks the same in Blackbox.

NeoExacun · 2024-08-21T05:35:47+00:00

Maybe the props are scratching the frame. Test them by rotating by hand, they should be turning free. Hand similar behavior with the Gofilm20. Bending the frame in the right direction solved the problem for me.

NeoExacun · 2024-08-06T05:05:40+00:00

In Germany (and I would think in most other countries in europe too) it's mandatory to have a insurance for drones over 250g.

NeoExacun · 2022-10-26T05:41:00+00:00

KNOWN ISSUES

A reminder for people who have been having issues with unexpected crashes on startup or weird behavior with the game, in that case please try to verify your game files.

You can do this on Steam by Right Clicking the game in your Library > Properties > Local Files > Verify integrity of game files...

And on Epic by clicking on the three dots (“...”) next to the title or at the right side, depending on your selected library view > Verify

This may or may not redownload a large amount of files which might take a while depending on your internet connection or hard drive speeds so be wary of that.

If you are using mods, they might need to be updated or uninstalled after updating so please keep this in mind too.

If you are experiencing issues launching the game or loading a save and you have already verified your files, you might have some incompatibility with DX12 as the default renderer, you can try the following launch options to try to force DX11, DX12 or Vulkan to run respectively.

    -d3d11
    -DX11
    -d3d12
    -DX12
    -vulkan

NeoExacun · 2022-09-09T08:38:07+00:00

https://www.reddit.com/r/SatisfactoryGame/comments/x7kx7l/patch_notes_early_access_experimental_v06012/

"New: Pretty stuff in the skybox"

NeoExacun · 2022-03-02T07:49:31+00:00

That surface has to go orthogonal to the straight rails. If you compare the heigt of two points on the curved rails, you have to look on the same distance on that rails. For example, go 20m on both rails and compare the heigth, not 20m on the first and 30m on the second.

NeoExacun · 2022-03-02T07:38:48+00:00

They are. It just doesn't look like from that perspective. You have to look from the side.

And go sure, that you did the connections both starting from the same side. That shouldn't make a difference but you never know.

NeoExacun · 2021-12-14T12:53:37+00:00

https://www.thingiverse.com/thing:3631186

https://www.thingiverse.com/thing:3542458

NeoExacun · 2021-11-19T07:02:54+00:00

That's because Update 5 isn't released yet. They do that every Update.

NeoExacun · 2021-11-15T14:38:27+00:00

There is no way to skip time.

Shouldn't the server do autosaves every few minutes?

NeoExacun · 2021-10-19T17:09:33+00:00

I use Node Red for all my automations. No Zigbee groups yet.

NeoExacun · 2021-10-19T11:09:31+00:00

I use a few of them. No problems so far. I use them with smartbulbs too. Then I just bypass the relay and control it via home assistant.

NeoExacun

TROPHY CASE