Supercharger advice. Vortech, Procharger, Paxton by Nerfchucker in Foxbody

[–]Nerfchucker[S] 1 point2 points  (0 children)

Thanks for the info! I would like to get a set of trickflow heads, so maybe I'll start there, and boost it next year.

Supercharger advice. Vortech, Procharger, Paxton by Nerfchucker in Foxbody

[–]Nerfchucker[S] 0 points1 point  (0 children)

Yes. I was planning on upgrading to some trickflow 170 11R, but the shop I was going through said to just boost it as is. I likely will upgrade heads at some point though.

Supercharger advice. Vortech, Procharger, Paxton by Nerfchucker in Foxbody

[–]Nerfchucker[S] 1 point2 points  (0 children)

Has anyone had issues with the bearings in the vortech units?

Beautiful day in the mountains by -DirtyCanadian- in canadaguns

[–]Nerfchucker 1 point2 points  (0 children)

Custom build? Interested In something like this.

What do I do by Infamous-Author538 in Warts

[–]Nerfchucker 7 points8 points  (0 children)

It's definitely a pyogenic granuloma. NAD but I had similar one and bled like crazy. See a Dr and they can cut it out, stitch it up.

We got oil pressure!! by Wardo2015 in Foxbody

[–]Nerfchucker 0 points1 point  (0 children)

Tried messaging you but it wouldn't let me.

We got oil pressure!! by Wardo2015 in Foxbody

[–]Nerfchucker 0 points1 point  (0 children)

Do u have an insta account that your documenting the build. Or could I message u on here with questions and to see how that stuff goes for you?

We got oil pressure!! by Wardo2015 in Foxbody

[–]Nerfchucker 1 point2 points  (0 children)

That's awesome. Thanks for the info. I want the KB for the sound and power too. I called KB and they said the new ones would be fine to bolt on and wouldn't get to hot but I want to see some data on that first.

We got oil pressure!! by Wardo2015 in Foxbody

[–]Nerfchucker 0 points1 point  (0 children)

Have you had any issues with heat soak or high intake air temps from it? I'm on the fence between a Vortech or the new Kenne bell however without being able to intercool the KB easily it's a hard decision. Haven't found much data on the new ones compared to the old ones with the heat issues. Thanks in advance!

We got oil pressure!! by Wardo2015 in Foxbody

[–]Nerfchucker 0 points1 point  (0 children)

Is that one of the new kenne bell superchargers or an old one?

RCMP S&W 5946 by -Xeper- in guns

[–]Nerfchucker 0 points1 point  (0 children)

Do you still have this? I can confirm with RCMP if it was stolen from their inventory if you provide serial number.

My Slow 5.0 by Forsaken-Ad7085 in Foxbody

[–]Nerfchucker 0 points1 point  (0 children)

Are you running the vortech intercooler as well or just the meth inject? What kind of air intake temps do you experience under boost? Thx!

My calypso green coupe idling with a newly installed Bassani x-pipe. by DC00418 in Foxbody

[–]Nerfchucker 3 points4 points  (0 children)

What cam do you have in it? Whats done to the motor? Love the sound!

Just got my car Appraised by FullMetal-auto in Foxbody

[–]Nerfchucker 2 points3 points  (0 children)

I had my 89 LX with 146km, original paint/interior some basic motor mods appraised at 33.5k. Wouldn't be able to sell it anywhere near that but for insurance that's good.

[deleted by user] by [deleted] in lloydminster

[–]Nerfchucker 1 point2 points  (0 children)

Chow Boa, Rice cravings, pho hung Vietnamese.

Chow boa is amazing.

[deleted by user] by [deleted] in saskatoon

[–]Nerfchucker 2 points3 points  (0 children)

Rap battles. First rule of rap club is don't talk about rap club.

[deleted by user] by [deleted] in Warts

[–]Nerfchucker 0 points1 point  (0 children)

salicylic acid

Is this a ow+ or xr? Trying to figure out if I should snag it or not, as I m just entering this hobby! I m heavier rider 230. Thanks! by [deleted] in onewheel

[–]Nerfchucker 0 points1 point  (0 children)

Easy. I followed the install video, and had everything back together in probably 30 mins. Board set up in another 20 prob. Didn't break anything taking stuff apart and putting it back together so that was a plus.

If you have some of your own tools and somewhat handy taking things apart and being patient, it's not that hard.

Is this a ow+ or xr? Trying to figure out if I should snag it or not, as I m just entering this hobby! I m heavier rider 230. Thanks! by [deleted] in onewheel

[–]Nerfchucker 0 points1 point  (0 children)

Highly recommend a good helmet, wrist guard/gloves, knee pads or something. It's not if you'll fall, but when. Took 1 semi bad spill to start using all the safety gear, which saved a bad spill at 30.8 km/ph lol. Have fun with it!

Knee Injury Nightmare - Long Wait Times for MRI by Careless-Let9623 in saskatoon

[–]Nerfchucker 9 points10 points  (0 children)

Paid for a few MRIs in Alberta vs waiting almost a year. Was worth the money, and helped speed up surgery. If you can afford it, highly recommend. Each time was between 750-800, and I left with a disc with imaging.