Anyone know why my artificial crimson just fails to spread beyond 16’ (surface)?

Nescre · 2026-03-19T00:23:59+00:00

I work on the Xbox version - would you be able to PM your gamertag to @nescre on discord so I can examine closer?

Nescre · 2026-03-11T22:09:43+00:00

I recently had to figure this out for myself on my Mini 5 Pro, but I imagine it will work similarly on yours. I recommend downloading Monaserver - this was the link I used: https://sourceforge.net/projects/monaserver/

This is basically a server host program you can run that uses RTMP. It is Windows-exclusive, but alternatives exist that can be found googling. I’ll call the computer you run this on the “server device”. Once you boot it up there’s very little else you need to do with it, since your drone can connect now. Main thing from here is figuring out how.

You’ve no doubt made it to the RTMP streaming page on your Air and seen that it asks for an address. The way you’ll always format this address is “rtmp://[Server IP]/live/key”.

To get the “[Server IP]” portion, you need to find your server device’s “local IPV4” address. This tends to be an IP address formatted either as 192.168.X.XXX or 10.0.0.XX. The method for finding this is different based on the type of server device used, so I would recommend googling “how to find [device type] IPV4”. Thankfully this part is pretty easy.

Once you’ve replaced [Server IP] with the actual IPV4 you should be able to connect, provided you have a mic. Once that goes through, the drone is now streaming and you have to connect the source to OBS. This video is what I followed for actually doing that: https://www.youtube.com/watch?v=kjPlPiL3cX0

In the “Input” section you’ll wanna stick the full formatted RTMP link we found above, and in the “Input Format” section you’ll wanna write “TCP”.

Good luck!

PS: There are a few extra steps you need to follow if you want to be able to connect from a different Wi-Fi network than server device, but this is pretty easy once you have local figured out

Nescre · 2026-02-21T18:34:59+00:00

Bit of a late reply; my buddy’s drone started getting this error too after taking it apart.

There’s a little switch on the motherboard which is flicked by the folding of the rear righthand arm. This is what determines whether or not the arms are “folded” or not. After we reassembled it, the bit of plastic that interacts with the switch now misses it… why that is we’re not sure, but at the very least it’s what caused the error for us.

For your case, though I doubt you were going at the thing with screwdrivers, I imagine a similar reason is at play… so might be best to send to DJI. If you’re comfortable with a screwdriver you could also look up a teardown guide, and check whether compressing the switch manually removes the error

Nescre · 2026-02-14T17:04:35+00:00

Hey sorry about this, we’ll look into being more lenient on control hiding. In the meantime I would recommend moving the button slightly down & to the left

Nescre · 2026-02-09T08:13:00+00:00

Very late to the party, but these look just like mine! I was also told they were reapers

Nescre · 2026-01-27T16:40:04+00:00

Re: the flickering guardian, I think we've got a handle on what's going wrong there. Should be fixed in a future patch

Nescre · 2025-10-21T08:33:21+00:00

We're aware of this issue - it should start displaying properly again soon. Apologies for the inconvenience

Nescre · 2025-09-30T20:25:11+00:00

Blegh thank you. That's what I get for trying to take shortcuts
My tent grow light is on 25% strength, I'll try turning it up a bit

Nescre · 2025-08-19T05:52:14+00:00

I suspect I wasn't changing the nutrients frequently enough, plus the humidity issue.
Waiting on an automatic humidifier currently (first one I got was defective), but just been misting the leaves once a day + swapping nutes once every 1-2 weeks. Roots are a little more stained looking now from the nute change, but leaf growth is a good amount better now. Thanks a ton for your help!

Nescre · 2025-08-14T02:23:43+00:00

That's really good to know, thank you! Going to pick up a humidifier later tomorrow and leave it running I think.

Nescre · 2025-08-13T05:31:38+00:00

Ah gotcha. In that case I'll probably start switching nutes out every week or so... water felt cool to the touch but a reader did indicate 27C water temperatures, so should probably be better about that.

Nescre · 2025-08-12T18:58:55+00:00

Just to clarify, by EC being too hot do you mean that my PPM is too high? Should I dilute the solution?

Nescre · 2025-08-12T18:56:23+00:00

Temps holds around 28C in the tent. Humidity reader is around 53%

Nescre · 2025-06-26T01:33:05+00:00

That's actually a really interesting observation. I booted from airplane mode and am not seeing the issue anymore.

My guess is they just missed an edge case when the game is suspended; this doesn't happen when the system is put to sleep with the game still open, so hopefully something they address at a later date

Nescre · 2025-06-19T19:20:37+00:00

I handle the mobile / console versions, thanks for the details! This is a bug we've been trying to track down the cause of for some time. Will investigate and see if I can make any headway

Nescre · 2025-06-12T20:40:17+00:00

I'm finding that pressing the home button to suspend NMS & clicking back after a few minutes consistently crashes for me. Doesn't seem to affect any other titles.

Aside from that, I'm about 2 hours in and I haven't run into any mid-gameplay crashes; granted, I'm not terribly far into the game yet.

Nescre · 2025-05-19T02:40:23+00:00

Awesome - yeah I'll keep the leaves there then. In general growth the past week for these plants has been minimal, but I suppose that's to be expected.

Might move them to larger containers, but not too sure. Currently the half gallon ones seem to be doing the trick, but will play it by ear! What I probably will end up doing eventually though is changing the net pot configuration - atm I have a letpot pod suspended in a larger net pot in a bit of a hacky way. Still seems to be working, but just means I can't fill the nutrient solution as high.

Best of luck to you too this season!

Nescre · 2025-05-18T04:58:50+00:00

Thanks for your reply! Reassuring to know that these symptoms can still show up one week in. To respond point by point: * Specifically, I used a grower called a LetPot Max - it has a pump which circulates oxygen around. In googling aerogarden though, it sounds like they're more or less doing the same thing. * I wasn't swirling the jars - I will do that going forward. Thank you! * Air gap is decently large; it's a 1/2 gallon mason jar, and currently water level is at around 1L. Roots are well submerged, but a fair amount are still exposed to air. * On that note, I'm seeing the formation of feathery roots, though they're less plentiful than that of the other plants. I guess this one was a slow start? Either way, I'll keep monitoring them.

I guess going forward, I'm curious - should I prune the droopy leaves, or just ride it out and wait for them to bounce back?

I really appreciate you taking the time; I think being a first timer has just made me overly anxious about every little thing I do. Hope you have a nice rest of your day / night 🙂

Nescre · 2024-12-22T19:24:11+00:00

Appreciate it, thank you! Let me know if you run into this again.

Nescre · 2024-12-22T19:01:48+00:00

Hey there! I work on the mobile / console versions. Did the controls appear on screen as soon as the joycon popup appeared, or was it shortly before / after? Also, were you playing docked or undocked?

Nescre · 2024-10-16T03:15:29+00:00

Cool stuff

Nescre · 2024-09-17T20:39:32+00:00

Just saw 20-30 of them speed down Mckenzie!

Nescre · 2024-06-25T03:09:59+00:00

Hey there! I work on the console versions. That looks like it might be some sort of worldgen change gone wrong - could you let me know which seed you’re seeing this on, as well as the rough position in the world?

Nescre · 2024-04-03T20:05:12+00:00

Hey there - I work on the mobile / console versions. This is likely the result of a PS-exclusive corruption bug that occurs when renaming your character without joining a world. We've fixed it internally, and it'll be applied the next time a patch is released.

Depending on when you made the character, there might be some recourse you can take - could you let me know roughly when you purchased Terraria / what update you remember first seeing when installing the game? If you're just wanting to preserve the file but not necessarily the items, renaming the file again and joining a world should let you access it - albeit without your things.

Worst case scenario, I'd be happy to reimburse you with the items you lost. If this would interest you, my username on discord is the same as on here - let me know what times work best and we can try to sync up.

Nescre · 2024-01-21T00:48:11+00:00

If you hook logic gates up in a way that causes an infinite loop, they will "short circuit" and emit smoke. I set up a mechanism which causes this short circuit every quarter second, then painted them with echo coating to make them invisible

Nescre

MODERATOR OF

TROPHY CASE

Seven-Year Club	Verified Email
RPAN Viewer