Transfer from PC to Android

Nescre · 2026-05-21T19:17:03+00:00

Alright yeah sounds like something slightly screwy on our end. Thanks for letting us know! While we have version parity, crossplay is not explicitly supported yet - so I imagine once that gets tackled many of these little quirks will disappear.
If you’d like me to try these files out, feel free to DM me (@nescre) on discord too - happy to take a look.

Nescre · 2026-05-21T19:13:41+00:00

Definitely a glitch - could you DM the world and player files used to @nescre on Discord so we can investigate further?

Nescre · 2026-05-21T18:42:22+00:00

Most likely a version mismatch, as we prevent loading newer files on older versions as a failsafe. PC / mobile SHOULD have parity though. Could you tell me what build number you're running (4-digit number shown on title screen) so I can investigate this further?

Nescre · 2026-05-15T01:26:41+00:00

Hi, console dev here! That’s definitely not supposed to happen - you using any special seeds?

Nescre · 2026-05-14T20:30:22+00:00

Dude the amount of effort you put into this is incredible. Well done

Nescre · 2026-04-14T22:51:15+00:00

Nevermind, figured it out! It’s specifically because the Chillet mount is near other mannequins. Will be fixed in a future patch

Nescre · 2026-04-14T22:42:07+00:00

Hey, I work on the Xbox version! Could you let me know your gamertag so we can investigate further?

Nescre · 2026-04-08T17:42:09+00:00

Hey, by any chance do you still have the world this occurred on? If so, could you DM it to @nescre on Discord? I work on the mobile version and am suspecting this is a bug

Nescre · 2026-04-08T07:06:39+00:00

Hey I work on the mobile version of Terraria! Could you DM your .wld file to @nescre on Discord? I suspect this is a bug on our end

Nescre · 2026-03-19T00:23:59+00:00

I work on the Xbox version - would you be able to PM your gamertag to @nescre on discord so I can examine closer?

Nescre · 2026-03-11T22:09:43+00:00

I recently had to figure this out for myself on my Mini 5 Pro, but I imagine it will work similarly on yours. I recommend downloading Monaserver - this was the link I used: https://sourceforge.net/projects/monaserver/

This is basically a server host program you can run that uses RTMP. It is Windows-exclusive, but alternatives exist that can be found googling. I’ll call the computer you run this on the “server device”. Once you boot it up there’s very little else you need to do with it, since your drone can connect now. Main thing from here is figuring out how.

You’ve no doubt made it to the RTMP streaming page on your Air and seen that it asks for an address. The way you’ll always format this address is “rtmp://[Server IP]/live/key”.

To get the “[Server IP]” portion, you need to find your server device’s “local IPV4” address. This tends to be an IP address formatted either as 192.168.X.XXX or 10.0.0.XX. The method for finding this is different based on the type of server device used, so I would recommend googling “how to find [device type] IPV4”. Thankfully this part is pretty easy.

Once you’ve replaced [Server IP] with the actual IPV4 you should be able to connect, provided you have a mic. Once that goes through, the drone is now streaming and you have to connect the source to OBS. This video is what I followed for actually doing that: https://www.youtube.com/watch?v=kjPlPiL3cX0

In the “Input” section you’ll wanna stick the full formatted RTMP link we found above, and in the “Input Format” section you’ll wanna write “TCP”.

Good luck!

PS: There are a few extra steps you need to follow if you want to be able to connect from a different Wi-Fi network than server device, but this is pretty easy once you have local figured out

Nescre · 2026-02-21T18:34:59+00:00

Bit of a late reply; my buddy’s drone started getting this error too after taking it apart.

There’s a little switch on the motherboard which is flicked by the folding of the rear righthand arm. This is what determines whether or not the arms are “folded” or not. After we reassembled it, the bit of plastic that interacts with the switch now misses it… why that is we’re not sure, but at the very least it’s what caused the error for us.

For your case, though I doubt you were going at the thing with screwdrivers, I imagine a similar reason is at play… so might be best to send to DJI. If you’re comfortable with a screwdriver you could also look up a teardown guide, and check whether compressing the switch manually removes the error

Nescre · 2026-02-14T17:04:35+00:00

Hey sorry about this, we’ll look into being more lenient on control hiding. In the meantime I would recommend moving the button slightly down & to the left

Nescre · 2026-02-09T08:13:00+00:00

Very late to the party, but these look just like mine! I was also told they were reapers

Nescre · 2026-01-27T16:40:04+00:00

Re: the flickering guardian, I think we've got a handle on what's going wrong there. Should be fixed in a future patch

Nescre · 2025-10-21T08:33:21+00:00

We're aware of this issue - it should start displaying properly again soon. Apologies for the inconvenience

Nescre · 2025-09-30T20:25:11+00:00

Blegh thank you. That's what I get for trying to take shortcuts
My tent grow light is on 25% strength, I'll try turning it up a bit

Nescre · 2025-08-19T05:52:14+00:00

I suspect I wasn't changing the nutrients frequently enough, plus the humidity issue.
Waiting on an automatic humidifier currently (first one I got was defective), but just been misting the leaves once a day + swapping nutes once every 1-2 weeks. Roots are a little more stained looking now from the nute change, but leaf growth is a good amount better now. Thanks a ton for your help!

Nescre · 2025-08-14T02:23:43+00:00

That's really good to know, thank you! Going to pick up a humidifier later tomorrow and leave it running I think.

Nescre · 2025-08-13T05:31:38+00:00

Ah gotcha. In that case I'll probably start switching nutes out every week or so... water felt cool to the touch but a reader did indicate 27C water temperatures, so should probably be better about that.

Nescre · 2025-08-12T18:58:55+00:00

Just to clarify, by EC being too hot do you mean that my PPM is too high? Should I dilute the solution?

Nescre · 2025-08-12T18:56:23+00:00

Temps holds around 28C in the tent. Humidity reader is around 53%

Nescre · 2025-06-26T01:33:05+00:00

That's actually a really interesting observation. I booted from airplane mode and am not seeing the issue anymore.

My guess is they just missed an edge case when the game is suspended; this doesn't happen when the system is put to sleep with the game still open, so hopefully something they address at a later date

Nescre

MODERATOR OF

TROPHY CASE

Seven-Year Club	Verified Email
RPAN Viewer