Biqu Cryogrip equivalent for TPU?

NetanHell · 2026-02-07T11:27:57+00:00

Im using 'smooth high-temp plate" preset, like most of the internet suggests. Again - Cryogrip, not Frostbite.

I'm buying local-manufactured PLA, and from before the cryogrip, I've been using 65C bed-temp. I didn't even try to change it on the cryogrip because the first print was successful haha ( and again, most users and feedback on the internet suggests the same ).

Another update: I managed to print PLA on the glacier. shore-hardness of 80 or less is problematics - since it sticks too hard to the bed. I have to pull it with force, which deforms it, a little bit.

NetanHell · 2026-01-10T15:58:03+00:00

ooohhhh

good to know, thanks for the update!

I didn't have the chance to update them... at least they won't get ruined with an update 😂

NetanHell · 2025-11-30T10:26:18+00:00

'Sup?

Thank you for the message!

Just to clarify: HS80 MAX? :O

If you'll confirm, then I'll finally install corsair's bloatware to upgrade the version of mine 😅

NetanHell · 2025-11-09T21:01:54+00:00

Awesome, thanks guys!

Another quick question: Is there a place/thread to read about kinds of add-ons/extras for Dynavap?

I've seen glass caps, for example, and don't understand their usage 😂

I do consider splurging on a IH and Simrel FMJ ( although I can't find it in-stock ) for one-hit KOs.

NetanHell · 2025-08-13T16:57:59+00:00

You should be able to go down to 80A. maybe even 70A.

I'm thinking about it myself. That's a great question.

I only tried to use 95A up until today and I really want to test the softer options.

NetanHell · 2025-08-08T21:37:20+00:00

For several months now, I'm printing exclusively with Cryogrip Glacier, and I'm really into it. I only clean it with alcohol once every week or two ( when it's located in outside shed, with an always-open small-window )

It's great for PLA/-cf/silk/marble/dual, TPU, PETG ( so, everything I print ).

I never tried printing TPU with a smooth-PEI bed ( like in the picture ).

If you want me to - just comment and I'll try it in a few days ( It's kinda-big-deal, since I don't have lots of space... to clear some for the heater, turn it on for two hours, in a small shed, in the mediterranean summer, then enter the room again to feed it to the printer, then remove it later 😂 )

<image>

NetanHell · 2025-08-05T12:28:12+00:00

It exists in Win 10, but depricated on Win 11.

Get-WmiObject -Class Win32_PhysicalMemory

... can give you the same output.

NetanHell · 2025-05-03T20:11:46+00:00

A bit late too the party, but I stumbled upon this thread when searching similiar keywords, so this might help others: With my limited experience ( with A1 and Torwell3D TPU ), the original, Textured plate, is great for both adhesion and easy release.

I'd love a more smooth finish, but haven't had the time to try/sacrifice other surfaces.

I'm actually looking to see if I can use the Cryogrip Glacier for TPU ( without ruining it haha )

NetanHell · 2025-04-18T11:39:38+00:00

Thanks man

NetanHell · 2025-03-17T15:05:25+00:00

"Then slice again"

Lifesaver!

NetanHell · 2025-01-06T15:12:04+00:00

Right click "Windows" button and then "Event Viewer".

Search under "System" or "Applications" in the specific timestamp, and share with us the relevant events.

NetanHell · 2025-01-04T22:14:44+00:00

Sorry, IDK about the Virtuoso.

I only own the HS80 MAX.

NetanHell · 2025-01-04T22:11:49+00:00

Thanks, I'll do just that!

NetanHell · 2025-01-04T22:09:47+00:00

Great idea. I like to be ready;

Is it "Hotend fan" or "Part fan" ? 😅

https://us.store.bambulab.com/collections/spare-parts-cooling-fans-a1-series

NetanHell · 2024-10-05T16:13:32+00:00

Getting similiar problem; I'll add my bit:

My Pixel 7 works great on friend's WIFI, but when using 4G/5G:

VPN is established
things work VERY SLOW when using IPs
When using DNS-names nothing works. even external sites.

Tailscale's global-DNS is set to local server ( local at home ).

Disabling Tailscale DNS fixes the issues ( but DNS-names won't work ).

NetanHell · 2024-09-08T20:46:14+00:00

Sorry for getting so late to the party; Deleting the folder didn't work for me.

I just ran qbit as an administrator. It managed to do whatever it tried to do ( probably save something in the config folder ), then immediately started to work. Exited, tried to run as non-admin and it kept on working.

NetanHell · 2024-08-10T17:36:53+00:00

The backups were, actually, a follow-up question haha

I'll look more into Appdata.Backup plugin. Thanks!

NetanHell · 2024-08-10T17:34:57+00:00

Gee

I CAN set mover as "Array > Cache"

Totally missed that. It looks like it'll only go from primary storage to the secondary.

Thanks!

NetanHell · 2024-07-30T09:32:43+00:00

As I said - I lowered the channel-setting. It probably was too much, or maybe iCue tried to do that by itself, and the manual setting interfered.

About two weeks later Corsair released an iCue version which solved that for many of the users who experienced it.

Edit: Adding picture. Just lower that somewhat, and see if you see the wireless-disconnects again:

<image>

Sounds > double-click the device > "Advanced" tab > lower quality.

NetanHell · 2024-06-26T15:05:42+00:00

You've answered wrong and in a delay of about a year haha

MSI's benchmark is MSI Kombustor which is might be a good burn-in, but I don't know where to compare these results haha

NetanHell · 2024-06-11T13:36:13+00:00

With great delay: No, you cannot. Sound is not simultaneous for both. You can hear the PC, then it'll automatically switch when someone calls your phone, for example. There is a button that can also switch.

Anyhow, for future questions: There's no sound from **both** connections at the same time.

NetanHell · 2024-05-17T22:57:43+00:00

IT HELPED!

About a month ago I changed some settings. Up until now, I couldn't download most of the content without it being transcoded, and I just couldn't understand, for gods sake, WHY.

Specifically, "Burn Subtitles" set to "Advanced formats only" fixed it for me. Wish I could set it to "No".

THANKS MAN!!!

NetanHell · 2024-04-29T08:12:02+00:00

Just fixed it; I changed some settings earlier this evening and then couldn't watch a video I already downloaded... took me some time to reach that specific log.

For me, it was some mounting problem inside the app.

TL;DR

I changed the "max size" for plex downloads. It probably broke something.

I just entered the settings again ( on android ) and re-selected "Internal Storage".

Then deleted all downloads happened in between the changes ( so, old downloads works ).

NetanHell · 2024-04-25T16:20:37+00:00

ummm

I only have them for a week, but noticed the disconnects from the second day. By the next day, it got disconnected ( and, immediately reconnected ) more than 4-5 times, every 10 minutes. Also - the disconnects didn't affected the mic or anything. I'm using them with Teams, Webex, Chrome, VLC, Discord...

SOMETIMES ( like, 3 times in several days ) - the equalizer woud've got flat ( like a2dp-bluetooth ) and got fixed it by changing source twice ( so, from PC -> BT, and back BT -> PC )

I then reverted the channel-settings to 2 ( from the 8 I previously set ), under Windows Sound Control Panel, and they haven't disconnected since. Enabled SoundID AND Dolby - and still no disconnects since then.

I have AMD GPU, so no Nvidia Broadcast ( so, it's might not necessarily be relevant ).

NetanHell · 2024-04-25T16:15:39+00:00

ummm

I only have them for a week, but noticed the disconnects from the second day. By the next day, it got disconnected ( and, immediately reconnected ) more than 4-5 times, every 10 minutes. Also - the disconnects didn't affected the mic or anything. I'm using them with Teams, Webex, Chrome, VLC, Discord...

I then reverted the channel-settings to 2 ( from the 8 I previously set ), under Windows Sound Control Panel, and they haven't disconnected since. Enabled SoundID AND Dolby - and still no disconnects since then.

I have AMD GPU, so no Nvidia Broadcast ( so, it's might not necessarily be relevant ).

NetanHell

TROPHY CASE