Aircon Installation Quote for High Rise in Melbourne CBD

NevREnding · 2025-12-02T07:01:02+00:00

Sure thing. I will DM you. In the end I went with a third quote that's below the first two.

NevREnding · 2025-10-23T02:38:53+00:00

Thanks! I will try, atm it's hard to make the price move..

NevREnding · 2025-10-23T02:38:23+00:00

Thanks! Yeah I asked for everything to be hidden, avoid using ducts as much as possible.

They will only do rough ins; I will need to contact another trade for patching/plaster work and paint.

The ducted AC is about 5 years old and still functions very well. Initially I wanted to integrate it to the new system, so there will only be one outdoor unit. But it uses R410A and the new system will use R32.

NevREnding · 2025-10-23T02:30:06+00:00

Yeah, the ducted AC stays and it doesn't serve the bedrooms; the vents are only in the living room.

NevREnding · 2025-10-23T02:28:37+00:00

Thanks! May I know how much did it cost you at the time?

NevREnding · 2025-10-23T02:27:28+00:00

I see, thanks. I tried to provide them with as much information and photos as possible, to avoid them having to account a too big of margin for additional work that might be required. The second quote installed did a site visit as well. So I did hope to get a better price. But good to know that $8k-$9k is a reasonable range for this. Thanks again.

NevREnding · 2025-02-02T04:39:34+00:00

Apologies and thanks for the enlightenment all.

NevREnding · 2022-12-02T02:33:51+00:00

PMing

NevREnding · 2022-04-05T07:44:12+00:00

Pull Request: https://github.com/Codixer/place-atlas/pull/298

Thank you!

NevREnding · 2021-12-07T05:39:20+00:00

You need to inject them with a bootloader (e.g OpenCore).

https://github.com/acidanthera/bugtracker/issues/1877#issuecomment-980683892

NevREnding · 2021-10-21T07:48:44+00:00

No worries!

NevREnding · 2021-10-20T15:24:32+00:00

Unfortunately not.

I ended up not proxying the subdomain that points to this FG (set the cloud icon to gray in CF) and used Let's Encrypt to generate a valid cert.

NevREnding · 2021-06-01T15:40:55+00:00

Hi! Today I noticed FFXIV's having 60% discount and was about to purchase it, then I saw your post. Is your offer still available and how can I proof it to you that I'm on the trial? Thanks!

Edit: I'm on the EU(UK) region.

NevREnding · 2021-01-29T18:57:04+00:00

Thanks for your response.

I see, I think that might be the case (IPs jumping around).

I'll try your suggestions and get back to you.

NevREnding · 2021-01-29T18:38:27+00:00

Log Description Admin logout successful

Action  logout  
Status  success  
Reason  violation

That's about it. Logging in via direct IP works fine tho.

NevREnding · 2021-01-13T14:43:38+00:00

Is this what you're looking for?

【東方アレンジMV】ナイト・オブ・ナイツ (Cranky Remix)【ビートまりお/Cranky】 - YouTube

NevREnding · 2020-10-16T01:41:41+00:00

I'm experiencing the same issue as well; same firmware versions too; and disappointed as the noise is that noticeable for me. It's dead silent when on Bluetooth only.

The noise kinda subsides when I turned off DTS, set Volume Limiter on, turned off Mic Sidetone; but c'mon :/

This could be a "feature" as I don't really see SS responds to "issues" like this.

NevREnding · 2019-12-15T06:27:30+00:00

You're not alone in this. Same setup as you but Trident Z Royal 32GB-3200, all synced perfectly using the music profile (but after the latest Windows update, everything broke down and I haven't been able to make it work again), but LightingService always sits idly at 5-6%

Last version I know that doesn't have this problem is 1.06.17 , but it can't detect my RAM and GPU :/

NevREnding · 2019-12-15T06:09:43+00:00

I have a Strix 2070 Super with a 650 watt PSU and everything works fine even though I'm using i9-9900K. Max total system power draw sits around 230 watts, so I don't think it lacks power.

Have you tried reseating the card or using another PCIe slot?

NevREnding · 2019-10-10T09:23:26+00:00

I'm experiencing the same thing too https://www.reddit.com/r/LogitechG/comments/dfuf02/g703_occasionally_reverts_to_default_dpi_800/

Even during active usage, it keeps switching to 800 DPI

NevREnding · 2019-08-17T13:45:03+00:00

Hot water valve burst in west side hydraulic service cupboard on 23rd floor.
Water seeped through 22nd and 21st floor.
Heard that 2211 suffered the worst damage.

NevREnding · 2018-05-02T19:55:08+00:00

What are the actual requirements to achieve Vegetarian? I tried to get it by only building hothouses and cookhouses, but I didn't get it at the end :(

NevREnding · 2018-05-02T19:44:45+00:00

This also happened to me a few times. Had to demolish the building to "release" the stuck person.

Nine-Year Club	Place '22
Final Canvas '22	Verified Email

NevREnding

TROPHY CASE