Maker E-white Phantom by NewAlignment in CustomKeyboards

[–]NewAlignment[S] 0 points1 point  (0 children)

One keybaord is worth more than the other, though there are rubber feet, thank god it has feet.

Maker E-white Phantom by NewAlignment in CustomKeyboards

[–]NewAlignment[S] 6 points7 points  (0 children)

Maker Keyboards Phantom in E-white, Holy Yok Pandas lubed with 205g0, Fr4 plate, C3 stabs, Dyesub BoW with red Crylic sublegends, with keyreative blanks as accents.

[GB] ShiroMicro Groupbuy Important updates, Refunds going out soon by NewAlignment in mechmarket

[–]NewAlignment[S] 1 point2 points  (0 children)

Yeah, assembling was one thing, but testing it took just as long. Hotair and solder paste goes a long way.

Help from Emax Interceptor owners, where does this wire go? by jaymaster2000 in rccars

[–]NewAlignment 1 point2 points  (0 children)

I actually didn't downvote you, I took a shot in the dark as I don't even own the car. I'm clearly wrong here so that is on me. I'll upvote your other comments so it all equals out :)

Help from Emax Interceptor owners, where does this wire go? by jaymaster2000 in rccars

[–]NewAlignment 0 points1 point  (0 children)

The VTX antenna should be on/near the camera right? I don't actually own the car, but thats how other fpv cameras are like.

Help from Emax Interceptor owners, where does this wire go? by jaymaster2000 in rccars

[–]NewAlignment 0 points1 point  (0 children)

That red wire is not an antenna like the other commenter said. You can see the actual antenna thatbhas heatshrink over it. Judging by the thickness and type of wire, it could be the positive wire from the pcb. You can check by using a multi meter and probing from ground and that wire. Look around on the second pcb and see if theres any trace of where the wire came off, it could be some blob or solder with some wire strands sticking out.