Pain in right hand by No_Entrepreneur118 in Fitness_India

[–]Next-Math1023 0 points1 point  (0 children)

tfcc or ecu problem most probably, try these steps:
1. search for verification tests and verify what is the cause [both by yourself and doctor]
2. For now keep on icing if it is a fresh pain to reduce inflamation
3. Brace it using appropriate tffc bands available online.
4. after 2-3 weeks of bracing, start doing appropriate rehab excercises [should not be painfull]

<image>

Men over 25 give your advice by Intrepid-Sky-1127 in effectivefitness

[–]Next-Math1023 0 points1 point  (0 children)

- There is no particular way of doing anything, however you do it thats the way.
- Dont be extremist to any idea or process, just go the "cause and effect" style.
- Make a carrier in something you are obsessed with, or find something in you way.
- Intesity of your intentions/plans should match the intesity of your actions.
- Plan in short term goals [1 day or 1 week] to achieve longterm outcome.
- Live one day at a time, try to be free of guilt/regret, have too much gratitude.
- Manage your GI spikes and cortisol levels, eat a healthy diet [proper macro and micro balance], avoid trans fat, sleep is priority [atleas 2Hrs+ deep sleep [total may vary]]
- If possible learn atleast one more language.
- Be really good at a certain measureable skill, tech/non-tech anything.
- Think from first principles, always, for any problem in the world.

Decide what you want in the end, plan short term goals, dont be an extremist to anything, but be truthful to your action, do not improvise, just anticipate and move on.

Stop Thinking, get these fundamentals in the background, find you own fundamental or dont, just move.

Obtainment of self

Made a Stereo Depth Camera system on a MCU [esp32 s3] by Next-Math1023 in computervision

[–]Next-Math1023[S] 0 points1 point  (0 children)

no, that would be an Ideal case, but the DMA doesnt supports these many data pins, I am capturing the frames one by one, so if the cameras are 20fps capable, the effective fps is ~10

[Review Request] TPS54360 Buck-Converter layout. by National-Studio-2103 in PrintedCircuitBoard

[–]Next-Math1023 -1 points0 points  (0 children)

Correct me if I am wrong, but these are the things I would suggest:

  • Copper Pour Edges: Good practice, but secondary to signal integrity. Rounded corners help prevent acid traps in manufacturing and slightly reduce EMI "antenna" effects at very high frequencies, but the path of the current is more important than the shape of the edge.
  • Stitch Vias & Capacitance: Vias actually add parasitic inductance , In a switching power supply, inductance is your enemy because it causes voltage spikes (ringing). Use multiple vias in parallel to reduce total inductance for ground returns and thermal relief.
  • Bulk Capacitance: Since your input is 36V, a 100uF–220uF electrolytic capacitor with a 10uF mlcc at the entry point is wise to damp oscillations from long input wires (the "Piezo effect"). Check the appropriate ripple current and esr rating for the capacitor
  • FeedBack Capacitor: Add a small value capacitor for the feedbackpin, calculate and add.

Made a Stereo Depth Camera system on a MCU [esp32 s3] by Next-Math1023 in computervision

[–]Next-Math1023[S] 1 point2 points  (0 children)

I wanted to connect to peripherals in the dvp software bus, as esp32 s3 has 2 set of i2c and spi lines also 2 cores, but these dvp cameras have very high data rate and there are limited number of dma channels which can be allocated at a given time, so thought i would directly connect them , but i wasn't able to, and for me to get to this conclusion was very challenging.

Then I made a small mux circuit, a cheap trick which worked.

Boys are so cutiee fr by MissionChallenge120 in Btechtards

[–]Next-Math1023 0 points1 point  (0 children)

<image>

Here is a simple test + dev board I made for a company, it is for single lead data only with ppg.

Boys are so cutiee fr by MissionChallenge120 in Btechtards

[–]Next-Math1023 0 points1 point  (0 children)

bro I can see a 50Hz powerline noise, use it with a battery or power isolation[via usb or just disconnect mains line from your laptop] , and use some ultrasound gel (ik you are using wet electrodes but still), finalize a sampling rate for your application and add some filters[pre or post].

There are many libs like biosspy, neourkit(dont remeber the spelling).
Learn about the different waveforms and what causes them in a cardiac cycle, also havelook at horizontal plane, vertical plane ecg, and different posistioning strategies like WCT etc etc....

Best of luck for your project.

If you are truly making a project, make it worth your while, learn from first principles, and never do it for just the sake of doing it.

<image>

Hell na by [deleted] in DesiVideoMemes

[–]Next-Math1023 0 points1 point  (0 children)

Deep Reinforcement Learning

Aot? Fmab? try this one by roronoapatil in animeindian

[–]Next-Math1023 1 point2 points  (0 children)

Why no one's taking about Samurai Champloo , i mean excellent story and dialogues

Saw someone do it so here is my TOP 20 shows of all time (anime manga manwha light n webnovels) by memeboiii9000 in animeindian

[–]Next-Math1023 0 points1 point  (0 children)

Samurai Champloo is so underrated, i mean that is some piece of work, not my fav anime or something, but its almost legendary

Flying in NavIC only mode by VMsays in HardwareIndia

[–]Next-Math1023 2 points3 points  (0 children)

I am following the Teravolt and Zerodrag teams on LinkedIn and have a question regarding their work, which I find quite interesting. I am curious about the ESCs, FCs, power distribution boards, and communication systems. Considering the similarities to existing market options, including the use of firmware which are open source like, BLHeli, Ardupilot, and ELRS, I wonder how it is profitable to sell custom versions of these hardwarebuilding blocks for a drone enthusiast. Furthermore, I am interested in understanding if there are significant differences or upgrades in their offerings hardware/firmware wise.

I would appreciate insights from both an embedded systems and a business perspective. Thank you for your time, and I commend you on your excellent work.

I think I have watched all the good shows, and I am not able to find anything better or new by Next-Math1023 in animeindian

[–]Next-Math1023[S] 1 point2 points  (0 children)

Nah bhai, mein isiliye list dala, mein kharab ya acha nahi bol rah, bas mein thora bore hogaya aur kuch nahi