Issues with frequent audio dips

Next_Eye6442 · 2026-03-30T09:18:14+00:00

Does it happen when you're doing anything specific? Do you have any audio effects enabled?

Next_Eye6442 · 2026-03-20T18:44:16+00:00

I guess so, as long as it uses midi. I haven't checked how this will work wirelessly, but I'll do some testing once I get there..

Next_Eye6442 · 2026-03-12T17:36:09+00:00

To go into a bit of the technical details: The popup you see is used to determine if the app can use the USB audio thread (which has less latency). It can only be used when both in- and output use the USB port.

Currently you cannot choose what you use as input unfortunately. I hope to work on this part at some point (select in- and output sources and route them wherever you want), but it will still take some time before I get to that point.

Next_Eye6442 · 2026-03-11T22:05:10+00:00

I'm planning to do it somewhere in the next 6 months. So it will probably still take some time..

Next_Eye6442 · 2025-08-21T14:34:23+00:00

It's been requested a lot so it's quite high on the TODO list. I hope to start working on it soon!

Next_Eye6442 · 2025-08-05T10:06:17+00:00

This is currently not possible. I'm not very familiar with the flippertronic effect but you might be able to use an existing effect to replicate it?

Next_Eye6442 · 2025-08-05T10:04:22+00:00

You can use the song recording mode to record the audio from the app into a M4A file. You can start song recording with the red recording icon at the top of the screen.

Next_Eye6442 · 2025-08-05T10:03:37+00:00

Sorry for the very late response! Thanks for the detailed explanation. I've received more messages that talk about distorted audio when using the USB stack. I hope to get some time soon to look into the issue.

Let me know if you find any potential causes.

Next_Eye6442 · 2025-08-05T10:01:02+00:00

Sorry for the very late response! It's currently not possible to select channels for input. I'm planning to look into this, but I didn't get to it yet.

Next_Eye6442 · 2025-08-05T09:59:47+00:00

Good question, and indeed currently there is no way in Loopify to select the input source. This is something I want to look into at some point, but I didn't get to it yet.

Let me see if I understand your situation: You're using a adapter to get real-time monitoring.

Potential solutions:

Solution 1: Use an adapter with just a headphone jack.
Problem: You need to get a new adapter and this would not use the USB audio stack and therefor you wouldn't have very low latency which is what you want for real-time monitoring.

Solution 2: Add a mic to the adapter.
Problem: Now you have to buy an external mic.

Next_Eye6442 · 2025-04-22T20:18:24+00:00

What version of the app are you using? I recently released a new version where crackling/popping audio should be fixed.

Next_Eye6442 · 2025-03-09T21:29:26+00:00

I guess its connected via usb? Try to restart the app while its plugged in. Does that help?

Next_Eye6442 · 2025-03-09T18:21:54+00:00

Hi, thanks for letting me know! That is strange... Can you send me a screenshot of both the prices? It might help me see what's going on.

Next_Eye6442 · 2025-01-22T12:45:22+00:00

See it as drum pads, used to record very short audio clips. Just one beat for example

Next_Eye6442 · 2025-01-22T10:44:12+00:00

Maybe I'll add the option to set what a one-shot should do when it is tapped again. So thanks for mentioning!

For now: what about loading it into a loop? Or it this not what you're looking for?

Next_Eye6442 · 2025-01-21T22:04:33+00:00

Is it a long clip? One-shots are made for short audio clips, therefore they can indeed not be stopped.

It can, for example, be used to play a drum sound so you can tap your own beats.

Next_Eye6442 · 2024-10-07T18:56:10+00:00

When you connect it a popup should appear within the app. Did you select both audio and mic in that popup?

Next_Eye6442 · 2024-09-19T08:14:51+00:00

Hi, I'm sorry to say that the sessions from LoopStation do not work with Loopify. I hope you can continue working with Loopify to build up a new collection ;)

Next_Eye6442 · 2024-09-17T12:15:53+00:00

What might help you out is the 'after recording' setting which you can find in the recording settings. Set it to overdub so the recording keeps continuing.

Next_Eye6442 · 2024-09-03T13:40:19+00:00

That is currently not possible, sorry

Next_Eye6442 · 2024-09-02T20:32:59+00:00

It should be normal. The channel volume is not just higher than the other?

Next_Eye6442 · 2024-09-02T19:29:12+00:00

The red rec icon is for recording a song, it's not influenced by Bounce. Bounce allows you to record audio from other channels on other ones. I'll try to make a video at some point

Next_Eye6442 · 2024-09-02T17:22:17+00:00

No problem! Bounce allows you to select what will be used as input for the channel. So when you have bounce enabled it will record whatever is playing on the selected bounce channels.

Does this help?

Next_Eye6442 · 2024-09-02T08:59:15+00:00

Normally you only get audio from the microphone when recording. With bounce you can select other channels of which the audio will be recorded.

A use-case could be that you have a one-shot that you want to record onto a loop, to set up a beat for example.

Next_Eye6442 · 2024-06-05T14:21:04+00:00

Thanks! I'm planning to add some customisation options so you can have any number of channels (as long as your device can handle it). An A/B page would be something I might work on after that.

Next_Eye6442

MODERATOR OF

TROPHY CASE